[split] Paddy Power won't go to stack - Printable Version +- StackAndTile Forums (https://www.stackandtile.com/forum) +-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1) +--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2) +--- Thread: [split] Paddy Power won't go to stack (/showthread.php?tid=1039) |
[split] Paddy Power won't go to stack - MN - 05-14-2015 Hi I have the same issue, but at paddypoker, I followed all adviced steps and nothing helps. My layout: [settings] table_width=816 table_height=639 total_slots=10 slot1x=1697 slot1y=692 slot2x=0 slot2y=0 slot3x=842 slot3y=0 slot4x=1697 slot4y=0 stack_slot=1 newtables_slot=grid move_to_grid=preflop oldtables_duration=5 oldtables_slot=grid scan_mode=DWM play_mode=SaT slot5x=0 slot5y=692 slot6x=845 slot6y=692 slot7x=-816 slot7y=0 slot8x=-816 slot8y=398 slot9x=-1665 slot9y=0 slot10x=-1665 slot10y=398 [general] show_walkthru=0 gui_x=176 gui_y=841 last_tab=Hotkeys filename=new.ini is_reloading=1 version=2.79c v=fu [sites] triobet_included_executable_path=C:\Microgaming\Poker\triobetMPP\mppoker.exe triobet_included_resized_table_width=816 triobet_included_resized_table_height=639 triobet_included_fold_color=0x1320d4 triobet_included_call_color=0xa119e triobet_included_bet_color=0xe17b2 number_of_sites=3 included_sites=triobet,triobet1,iPoker_noChat micro_included_executable_path=C:\Microgaming\Poker\PlayPokerMPP\mppoker.exe micro_included_resized_table_width=816 micro_included_resized_table_height=639 micro_included_fold_color=0x1e2d3d micro_included_call_color=0x34475b micro_included_bet_color=0x314f78 triobet1_included_executable_path=C:\Microgaming\Poker\PlayPokerMPP\mppoker.exe triobet1_included_resized_table_width=816 triobet1_included_resized_table_height=639 triobet1_included_fold_color=0xedebea triobet1_included_call_color=0x345466 triobet1_included_bet_color=0x355668 iPoker_noChat_included_executable_path=C:\Users\Michal\AppData\Local\Paddy Power Poker\casino.exe iPoker_noChat_included_resized_table_width=848 iPoker_noChat_included_resized_table_height=639 iPoker_noChat_included_fold_color=0x445515 iPoker_noChat_included_call_color=0x4b5d18 iPoker_noChat_included_bet_color=0x5d7215 [hotkeys] number_of_hotkeys=7 hotkey1action=Fold + Stack table hotkey1key=~RButton hotkey2action=Keep table in grid hotkey2key=L hotkey3action=Start/Stop SaT hotkey3key=Delete hotkey4action=Call hotkey4key=PgDn hotkey5action=Move table to Next slot hotkey5key=Right hotkey6action=Move table to Previous slot hotkey6key=Left hotkey7action=Send table to bottom hotkey7key=Down send_table_under_mouse=1 RE: [split] Paddy Power won't go to stack - SaT_Admin - 05-14-2015 I've split your issue into a new thread. Its a completely different site so its not the same issue. As always, here is the Test that needs to be performed: http://www.stackandtile.com/sat/help/tables-will-not-stay-stack-tables-pop-incorrectly You didn't explain WHEN the tables pop into the grid. Is it always, even if there are no buttons at all? Is it only when the advance action checkboxes are visible? Can you post screenshots of the table 1. with the fold/call/bet buttons visible and 2. without and 3. with the checkboxes visible? Finally, it looks like you have multiple Micgrogaming custom sites Included into SaT. You should only have one. RE: [split] Paddy Power won't go to stack - MN - 05-15-2015 When I attempt to move the table into the stack, the table does not stay in the stack, and instead immediately pops back out into grid when I use fold+stack or just stack option. When I try to post a link to requested screenshot I got an error, that Im not allowed to do it. How can I post it? RE: [split] Paddy Power won't go to stack - SaT_Admin - 05-15-2015 Just put a space between the http somewhere. Since you are a guest user on the forum, it prevents you from posting links to prevent spammers RE: [split] Paddy Power won't go to stack - mn - 05-15-2015 http://postimg.org/image/ijfsau3fx/d96e410f/ RE: [split] Paddy Power won't go to stack - SaT_Admin - 05-15-2015 Based on that picture, the table should stay in the stack when there are no buttons at all (left image). But the table would pop out when the checkboxes are visible (bottom right). Is that correct? Its weird though, because your config file is showing greenish colors for the buttons, whereas the screenshot is showing red. Have you tried removing and re-including the site? What version of Windows are you on? RE: [split] Paddy Power won't go to stack - Guest - 05-15-2015 3)Win 8.1 2)I've tried removing and re-including the site. 1)Table doesnt stay in the stack, when I fold+ stack, it instantly reappear in the same place in the grid. RE: [split] Paddy Power won't go to stack - SaT_Admin - 05-15-2015 (05-15-2015, 04:43 AM)Guest Wrote: 3)Win 8.1 Did you make sure this setting is correct? http://www.stackandtile.com/sat/help/windows-81-fix I think that may be the problem RE: [split] Paddy Power won't go to stack - Guest - 05-15-2015 I've tried changing that, but it does not solve the issue. RE: [split] Paddy Power won't go to stack - SaT_Admin - 05-15-2015 (05-15-2015, 06:46 AM)Guest Wrote: I've tried changing that, but it does not solve the issue. Was it set incorrectly before? Did you re-Include the site afterward? Does the table at least stay in the stack when its all black at the bottom like on the left image? Can you paste your config now? |