+- StackAndTile Forums (https://www.stackandtile.com/forum)
+-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1)
+--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2)
+--- Thread: SaT doesn't work after 888 update (/showthread.php?tid=1815)
Pages:
1
2
SaT doesn't work after 888 update - Tonaldinho11 - 11-03-2017
Since the 888 update, SaT doesn't work anymore. Tables don't popup when action is required and don't go back into the stack when folding.
RE: SaT doesn't work after 888 update - SaT_Admin - 11-03-2017
EDIT: Nov-7-17
please see this post for the latest test version:
http://www.stackandtile.com/forum/showthread.php?tid=1815&pid=8546#pid8546
----------------------------------------------
On the SaT Included Sites listbox, does the sitename say 888Poker or 888Poker_Small?
Can you please try to Remove and re-Include the 888Poker site and tell me if it works?
What version of SaT does it say on the About tab?
RE: SaT doesn't work after 888 update - Tonaldinho11 - 11-03-2017
Sitename says 888Poker. I removed and included it again and it seems to be working now, so thanks!
RE: SaT doesn't work after 888 update - SaT_Admin - 11-03-2017
Ok good, thanks for letting me know!
RE: SaT doesn't work after 888 update - Guest - 11-04-2017
(11-03-2017, 11:21 PM)SaT_Admin Wrote: Ok good, thanks for letting me know!
Hi,
I'm also having problems after the update. I've already removed and reinstated the site and the hotkeys do not work.
Regards,
RE: SaT doesn't work after 888 update - SaT_Admin - 11-04-2017
(11-04-2017, 03:42 AM)Guest Wrote: Hi,
I'm also having problems after the update. I've already removed and reinstated the site and the hotkeys do not work.
Regards,
Please answer these questions:
1. On the SaT Included Sites listbox, does the sitename say 888Poker or 888Poker_Small?
2. What version of SaT does it say on the About tab?
3. Are you using any custom graphics on your table?
RE: SaT doesn't work after 888 update - Guest - 11-05-2017
(11-04-2017, 06:44 AM)SaT_Admin Wrote:(11-04-2017, 03:42 AM)Guest Wrote: Hi,
I'm also having problems after the update. I've already removed and reinstated the site and the hotkeys do not work.
Regards,
Please answer these questions:
1. On the SaT Included Sites listbox, does the sitename say 888Poker or 888Poker_Small?
2. What version of SaT does it say on the About tab?
3. Are you using any custom graphics on your table?
1) 888Poker
2) Version 2.94
3) Before the update all the hotkeys worked and nothing was modified after that.
RE: SaT doesn't work after 888 update - SaT_Admin - 11-05-2017
(11-05-2017, 03:24 AM)Guest Wrote: 1) 888Poker
2) Version 2.94
3) Before the update all the hotkeys worked and nothing was modified after that.
Can you download and install this version v2.94y2 and then Remove and re-Include the site and tell me if it works?
http://www.stackandtile.com/sat/tmp/StackAndTile_Setup-294y2.exe
If not, can you use the menu item for Help->Diagnostic->Take Screenshot with GDIP, and upload the screenshot ?
RE: SaT doesn't work after 888 update - Guest - 11-05-2017
Hi,
Still not working.
This is the screenshot link:
https://www.dropbox.com/s/5rn0s6tbzr9vqqz/scs.png?dl=0
Regards,
RE: SaT doesn't work after 888 update - SaT_Admin - 11-05-2017
Hrmmm ok. Do you have multiple monitors in your Win10 setup? If so, have you done the Win10 fix?
http://www.stackandtile.com/sat/help/windows-10-fix
only do #1 that is listed on that page. If you only have 1 monitor then it shouldn't matter and nothing should need to be done.
What problem are you having? Is SaT always detecting that action is required? Or never detecting it? Or something else?