01-06-2013, 07:57 AM
Hello!
Downloaded trial. Done with setup. Everything is nice. Good soft.
2 days of multitabling SNG at Titan (iPoker) and 888 (Pacific) together.
I use TILE only, so no table moving at all, made 12 table grid and very happy with it. Mouse move to active table is ON.
Problem: when it is my turn to act on 888 table, mouse moves only 50% time to it. I mean mouse moves to active 888 table only about once in two times, not exactly but something about that. Maybe even 30% times. And red frame does correct job, it moves when it should. But its impossible to multitable.
When its turn on Titan table, mouse moves 100 times out of 100. When action on 888 i lose control, because i am looking where is table to act and secondly i look for my mouse and move it manually to active table. I switched red frame off, no reason to use it. Set it to send hotkeys to table UNDER MOUSE, because when mouse not allways move i make mistakes on tables i dont have my eyes on, because my eyes follow mouse. I use wireless gamepad, not mouse.
Firstly i was thinking problem is when i have more programms open, like Xpadder for gamepad controls, then PTFB for autoclicking stupid popup windows... actually what i want to say - i switched all programms off, exited at all. Only opened was Titan, and 888 tables and SaT and used my mouse only. Nothing changed. Mouse moved to Titan tables 100% but to 888 tables 30 - 50 % . SO any ideas why mouse not allways move to 888 tables?
Secondly i want to ask, is it possible to change border colour from red to say blue and make it bigger, i mean with fat lines? If yes, can you tell me where to write commands.
And one more think, i dont know what happened. First day i setup Stack and Tile, used default SaT function to use one stack for inactive tables and active tables made to come nicely customized grid, not bad. Very satisfied. Even when i pressed fold (used hotkey to Fold and send to grid) and there still had a chance to use check it not moved to grid and i had a chance to use action, very very nice done! Everything worked fine (but same problem with mouse not moving to 888 active tables 100%) but this time i will not talk about mouse, there was something i cant explain, but all i can tell is: when some tables moved out from stack to grid for action i pressed FOLD with my RIGHT MOUSE BUTTON (it was set to Fold and send back to stack) and what happened is i watch on that table and it RAISED or CALLED, not shore instead of FOLD.. then next table poped out from stack to grid and SAME... it raised or called, i think and something started to freeze and it was impossible to press any button i thinnk and there was allready 6 tables to act in grid and i was hopeless and on all tables it was raising and betting.. i was going crazy.. i was thinking this is it THE END OF THE WORLD.. LOL... Only action helped CTRL+ALT+DEL and to stop that madness... i lost on 5 or 6 tables... on few i was megachipleader... i was so tilted i didnt played that day at all. Next day i was thinking a lot... and found interesting for me solution. Not sure i am right but that what was helped i think... i firstly unchecked "take care of left mouse action" and secondly i remembered that there was one popup when setting up hottkeys, so i reentered hotkeys and when adding "FOLD AND SEND BACK TO STACK" to use with RIGHT MOUSE BUTTON, there is popup jumping up, it asks somethink like - do you want to pass thru it to underlying windows and use other functions under mouse, and this time i pressed NO. Dont know its helped, but crazy betting and raising on all tables gone
Anyway i use only TILE now and only problem is mouse movement to 888 tables and maybe border changes.. i cant see that thin red border when lot of action its useless for me. I made very big blinking cursor and when it is on active table blinking i can see it even from my kitchen
So all i realy want before buying this good soft is to make sure my blinking mouse cursor is muving 100% to all active tibles, 100 times out of 100. Thank you and sorry for long hard text in not proper english.
Downloaded trial. Done with setup. Everything is nice. Good soft.
2 days of multitabling SNG at Titan (iPoker) and 888 (Pacific) together.
I use TILE only, so no table moving at all, made 12 table grid and very happy with it. Mouse move to active table is ON.
Problem: when it is my turn to act on 888 table, mouse moves only 50% time to it. I mean mouse moves to active 888 table only about once in two times, not exactly but something about that. Maybe even 30% times. And red frame does correct job, it moves when it should. But its impossible to multitable.
When its turn on Titan table, mouse moves 100 times out of 100. When action on 888 i lose control, because i am looking where is table to act and secondly i look for my mouse and move it manually to active table. I switched red frame off, no reason to use it. Set it to send hotkeys to table UNDER MOUSE, because when mouse not allways move i make mistakes on tables i dont have my eyes on, because my eyes follow mouse. I use wireless gamepad, not mouse.
Firstly i was thinking problem is when i have more programms open, like Xpadder for gamepad controls, then PTFB for autoclicking stupid popup windows... actually what i want to say - i switched all programms off, exited at all. Only opened was Titan, and 888 tables and SaT and used my mouse only. Nothing changed. Mouse moved to Titan tables 100% but to 888 tables 30 - 50 % . SO any ideas why mouse not allways move to 888 tables?
Secondly i want to ask, is it possible to change border colour from red to say blue and make it bigger, i mean with fat lines? If yes, can you tell me where to write commands.
And one more think, i dont know what happened. First day i setup Stack and Tile, used default SaT function to use one stack for inactive tables and active tables made to come nicely customized grid, not bad. Very satisfied. Even when i pressed fold (used hotkey to Fold and send to grid) and there still had a chance to use check it not moved to grid and i had a chance to use action, very very nice done! Everything worked fine (but same problem with mouse not moving to 888 active tables 100%) but this time i will not talk about mouse, there was something i cant explain, but all i can tell is: when some tables moved out from stack to grid for action i pressed FOLD with my RIGHT MOUSE BUTTON (it was set to Fold and send back to stack) and what happened is i watch on that table and it RAISED or CALLED, not shore instead of FOLD.. then next table poped out from stack to grid and SAME... it raised or called, i think and something started to freeze and it was impossible to press any button i thinnk and there was allready 6 tables to act in grid and i was hopeless and on all tables it was raising and betting.. i was going crazy.. i was thinking this is it THE END OF THE WORLD.. LOL... Only action helped CTRL+ALT+DEL and to stop that madness... i lost on 5 or 6 tables... on few i was megachipleader... i was so tilted i didnt played that day at all. Next day i was thinking a lot... and found interesting for me solution. Not sure i am right but that what was helped i think... i firstly unchecked "take care of left mouse action" and secondly i remembered that there was one popup when setting up hottkeys, so i reentered hotkeys and when adding "FOLD AND SEND BACK TO STACK" to use with RIGHT MOUSE BUTTON, there is popup jumping up, it asks somethink like - do you want to pass thru it to underlying windows and use other functions under mouse, and this time i pressed NO. Dont know its helped, but crazy betting and raising on all tables gone
Anyway i use only TILE now and only problem is mouse movement to 888 tables and maybe border changes.. i cant see that thin red border when lot of action its useless for me. I made very big blinking cursor and when it is on active table blinking i can see it even from my kitchen
So all i realy want before buying this good soft is to make sure my blinking mouse cursor is muving 100% to all active tibles, 100 times out of 100. Thank you and sorry for long hard text in not proper english.
