For some reason since this morning whenever a table is needing action it wont pop up. I just hear my time bank running out. When i try to use my hotkey for activate table needing action nothing happens. Also if i try to manually go search for it through windows it always pops the current table im on back up. Only way to get there is to move table to another grid slot ( currently using stack+tile layout) This is on WPN btw. And ive tried readding the site twice.
Yea i just recently upgraded. When ive tried to run the test it keeps popping back onto grid.
edit - one of the problems i mentioned where i said it always pops the current table im on back up has been going on always but it never had the problem where the table needing action would not pop up so i just thought that was the way the program worked.
Also some more information not sure if relevant i do use a modded background and cards. not sure if that would cause an issue. Ive always used it before. i could go back to orginal for trial purposes.
I don't fully understand, but I don't think thats the way the program is supposed to work. More likely is that yes the modded background could definitely cause the problem. Post screenshots of your table when the fold/call/bet buttons are visible, and when they are not
with SaT running or? does it matter
Hrmmmm. Those buttons are red, but on the sides they are very dark reddish black. That might conflict with the dark gray background. Only the very middle of the buttons are bright red.
Can you click on File -> Current Layout to open up your config file, copy and paste me everything?
[settings]
table_width=808
table_height=606
total_slots=6
slot1x=0
slot1y=0
slot2x=0
slot2y=434
slot3x=808
slot3y=0
slot4x=2424
slot4y=0
stack_slot=1
newtables_slot=1
move_to_grid=preflop
oldtables_duration=7
oldtables_slot=6
scan_mode=DWM
play_mode=SaT
slot5x=808
slot5y=434
slot6x=1112
slot6y=212
activate_most_urgent=1
activate_table_under_mouse=0
highlight_active_win=0
move_mouse_to_most_urgent=0
left_click_detection=1
stack_when_clicking_call_or_bet=0
stack_table_at_end_of_hand=0
drag_drop_swap_slots=0
minimize_to_tray=0
show_table_count_while_running=0
show_session_timer=0
move_888_popups=1
close_bovada_popups=1
stars_include_logged_in_as=0
notify_new_tables=0
notify_old_tables=1
notify_keep_in_grid=1
notify_ignore_table=1
notify_move_to_grid=1
notify_end_of_hand=0
notification_duration=3
hotkeys_fire_on_release=0
allow_action_hotkeys_on_ignored_tables=1
click_bet_for_betsize_hotkeys=0
click_bet_for_betxbb_hotkeys=0
also_keep_in_grid_when_move_to_slot_x=0
fold_checkbox_setting=Fold
also_stack_table_for_betsizeX=0
focus_betbox=0
detect_hidden_windows=0
auto_accept_stars_waitlists=0
click_stars_info_tab=0
[general]
show_walkthru=0
gui_x=1363
gui_y=225
last_tab=
filename=stack2.ini
is_reloading=1
version=2.91
win_ver=10.0.14393
v285_msg=0
v=sm
v291_msg=0
[sites]
number_of_sites=1
included_sites=WinningPoker
WinningPoker_included_executable_path=C:\AmericasCardroom\AmericasCardroom.exe
WinningPoker_included_resized_table_width=808
WinningPoker_included_resized_table_height=606
WinningPoker_included_fold_color=0x20143
WinningPoker_included_call_color=0x3022a
WinningPoker_included_bet_color=0x40377
[hotkeys]
number_of_hotkeys=13
hotkey1action=Fold
hotkey1key=F9
hotkey2action=Call
hotkey2key=F8
hotkey3action=Activate most urgent table
hotkey3key=F12
hotkey4action=Cycle stack backward
hotkey4key=F11
hotkey5action=Cycle stack forward
hotkey5key=F10
hotkey6action=Move table to slot 2
hotkey6key=Insert
hotkey7action=Move table to slot 3
hotkey7key=Home
hotkey8action=Stack table
hotkey8key=F5
hotkey9action=Send table to bottom
hotkey9key=F3
hotkey10action=Stack all tables
hotkey10key=PgDn
hotkey11action=Bet 2.5 bb
hotkey11key=PgUp
hotkey12action=Sit Out all tables
hotkey12key=Pause
hotkey13action=Sit Out Next BB all tables
hotkey13key=PrintScreen
send_table_under_mouse=1
Ok here's what I'd like you to try. At the very top of the file, add this line underneath [settings]
Code:
[settings]
color_variation=8
Then save the file, then close and reopen SaT
Then run the Test again and see if its fixed. If not, try changing it down to
color_variation=0 and then save and close/open and Test again
Let me know
that seemed to work have worked perfectly in the test this time
edit - It appears to be working normally now. Guess the color of my mod was doing something to it? found out the other problem i was having with the tables moving back up top was because i somehow turned back on auto switch tables in acr. i noticed it when i was readding the sites trying to fix issue.