StackAndTile Forums

Hi,
ever since I started using SaT, I have had the problem that the tables sometimes at random move in and out of the grid when I press either fold, call or bet/raise in setad of responding wih the required action. There is no specific pattern to this that I can see and since adding a couple of new sites to the layout it has gotten even worse, so that now a lot of times the tables do not even pop up when I need to act which leads to a decent amount of unwanted time outs at tables.

This is my layout file:


[settings]
table_width=639
table_height=468
total_slots=6
slot1x=-1915
slot1y=0
slot2x=-1276
slot2y=0
slot3x=-639
slot3y=0
slot4x=-1920
slot4y=468
slot5x=-1281
slot5y=468
slot6x=-639
slot6y=468
stack_slot=1
newtables_slot=grid
move_to_grid=vpip
oldtables_duration=5
oldtables_slot=grid
scan_mode=DWM
play_mode=SaT
[general]
show_walkthru=0
gui_x=-597
gui_y=494
last_tab=Layout
is_reloading=1
version=2.73
v=fu
[sites]
PokerStarsBlack_included_executable_path=C:\Program Files (x86)\PokerStars.DK\PokerStars.exe
PokerStarsBlack_included_resized_table_width=639
PokerStarsBlack_included_resized_table_height=468
PokerStarsBlack_included_fold_color=0x20250
PokerStarsBlack_included_call_color=0x20252
PokerStarsBlack_included_bet_color=0x3036f
number_of_sites=6
included_sites=PokerStarsBlack,888PacificPoker,iPoker,OnGame,Winamax,microgaming
888PacificPoker_included_executable_path=C:\Program Files (x86)\PacificPoker\bin\poker.exe
888PacificPoker_included_resized_table_width=639
888PacificPoker_included_resized_table_height=468
888PacificPoker_included_fold_color=0xcf7e05
888PacificPoker_included_call_color=0xda59
888PacificPoker_included_bet_color=0x782ff
iPoker_included_executable_path=C:\Users\Morten\AppData\Local\William Hill Poker\casino.exe
iPoker_included_resized_table_width=639
iPoker_included_resized_table_height=470
iPoker_included_fold_color=0x989898
iPoker_included_call_color=0x939393
iPoker_included_bet_color=0x989898
OnGame_included_executable_path=C:\Betsafe.dk\Betsafe.dk.exe
OnGame_included_resized_table_width=639
OnGame_included_resized_table_height=468
OnGame_included_fold_color=0x454545
OnGame_included_call_color=0x454545
OnGame_included_bet_color=0x2b2724
Winamax_included_executable_path=C:\Program Files (x86)\Winamax Poker\Winamax Poker.exe
Winamax_included_resized_table_width=639
Winamax_included_resized_table_height=468
Winamax_included_fold_color=0x60361
Winamax_included_call_color=0x60361
Winamax_included_bet_color=0x60361
microgaming_included_executable_path=C:\Microgaming\Poker\NordicBetDenmarkMPP\mppoker.exe
microgaming_included_resized_table_width=588
microgaming_included_resized_table_height=468
microgaming_included_fold_color=0xbd7e45
microgaming_included_call_color=0xc18247
microgaming_included_bet_color=0xa76839
[hotkeys]
number_of_hotkeys=3
hotkey1action=Keep table in grid
hotkey1key=G
hotkey2action=Tile all tables
hotkey2key=T
hotkey3action=Sit Out Next BB all tables
hotkey3key=S
send_table_under_mouse=1

(12-13-2014, 01:39 AM)besen Wrote: [ -> ]Hi,
ever since I started using SaT, I have had the problem that the tables sometimes at random move in and out of the grid when I press either fold, call or bet/raise in setad of responding wih the required action. There is no specific pattern to this that I can see and since adding a couple of new sites to the layout it has gotten even worse, so that now a lot of times the tables do not even pop up when I need to act which leads to a decent amount of unwanted time outs at tables.

This is my layout file:

Code:

[settings]
move_to_grid=vpip

oldtables_duration=5
oldtables_slot=grid

Based on your settings, here's whats supposed to happen:

- tables in the stack will move to the grid when you click Call/Bet (Move to Grid = After entering pot)
- tables in the grid will move back to the stack when you click Fold
- tables in the stack will move to the grid as an Old Table after 5 minutes of no action

You say theres no pattern, which is bad news because that makes it hard to debug. But its unlikely that things are happening randomly. There may be a problem with your setup somehow.

Please check each of the above items, one at a time, with one table on one site. Make sure they are working properly.

In addition, you can turn on all the Notifications in Advanced Options so that you will get a popup telling you each time a table moves, and that can help us debug it further.

Ok, so I tested the sites individually and there is definately a problem with ipoker. Every time the ipoker software is open it influences the other tables even when I am not even including it or have any tables open there. I then tried to remove and reinclude ipoker a couple of times, but this was not even possible because when I got to the "fold with F10" part it called in stead of folding. I tried several times and in between closed and restarted the ipoker software, but with the same result.

Well that probably explains it. As mentioned on the iPoker help page, you need to make sure your chatbox is full sized. That will stop the calling instead of folding.

http://www.stackandtile.com/sat/help/ipoker