Post a New Reply
Reply to thread: in PW, cannot get tables to "move to grid" when action required
Username:
Please select the number: 4	1 2 3 4 5 6 7 8 9 10
Post Subject:
Your Message: Smilies	[quote="SaT_Admin" pid='6051' dateline='1446072377'] Ok, first of all [c]move_to_grid=preflop[/c] is the correct setting which corresponds to "When action required". The name "preflop" is a result from the old setting which was named "Preflop" but in the interface it has since been changed to "When action required". But the word "preflop" is still used internally (although this will probably be corrected in a future version). And [c]move_to_grid=never[/c] corresponds to "Never", so you don't want that. Now, as for the real problem: A couple things for you to try, in order: 1. Remove and re-Include "WinningPoker" site, and retry. 2. Create a new layout with the menu item: "File -> New Layout". When it asks you to press F7 to define your slot size, first resize a WPN table with your mouse, to the size that you want your tables to be. Then press F7. This will match SaT's slot size with the WPN native proportions, which could be the problem. Looking at your config, the [c]WinningPoker_included_resized_table_width/height[/c] settings are pretty far off of the [c]table_width/height[/c] settings. Let me know the results of both of those. Finally, if neither of those work, this may have nothing to do with PW scan mode. Can you try turning on Aero theme temporarily, and using DWM scan mode, and then removing and re-Including WinningPoker and see if it works? That will be a clue also. [/quote]
Post Options:	Disable Smilies: disable smilies from showing in this post.
Thread Subscription: Specify the type of notification and thread subscription you'd like to have to this thread. (Registered users only)	Do not subscribe to this thread Subscribe without receiving any notification of new replies Subscribe and receive email notification of new replies Subscribe and receive PM notification of new replies
Image Verification Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.	(case insensitive)

Thread Review (Newest First)

Posted by SaT_Admin - 10-29-2015, 08:46 AM

Ok, first of all move_to_grid=preflop is the correct setting which corresponds to "When action required". The name "preflop" is a result from the old setting which was named "Preflop" but in the interface it has since been changed to "When action required". But the word "preflop" is still used internally (although this will probably be corrected in a future version). And move_to_grid=never corresponds to "Never", so you don't want that. Now, as for the real problem: A couple things for you to try, in order: 1. Remove and re-Include "WinningPoker" site, and retry. 2. Create a new layout with the menu item: "File -> New Layout". When it asks you to press F7 to define your slot size, first resize a WPN table with your mouse, to the size that you want your tables to be. Then press F7. This will match SaT's slot size with the WPN native proportions, which could be the problem. Looking at your config, the WinningPoker_included_resized_table_width/height settings are pretty far off of the table_width/height settings. Let me know the results of both of those. Finally, if neither of those work, this may have nothing to do with PW scan mode. Can you try turning on Aero theme temporarily, and using DWM scan mode, and then removing and re-Including WinningPoker and see if it works? That will be a clue also.

Posted by DS1 - 10-29-2015, 08:26 AM

side note: When all of my chips are in the middle, on a hand, the table will move back into the stack and stay there when I press the stack HK. if someone else is alllin and I have them covered and I call it, it stubbornly moves back into the grid after stacking, just like any other time I have cards...

Posted by DS1 - 10-29-2015, 08:14 AM

[settings] increase_bet_increment=bb decrease_bet_increment=bb click_button_for_increase_decrease_bet=0 table_width=633 table_height=480 total_slots=6 slot1x=1266 slot1y=0 slot2x=1266 slot2y=478 slot3x=633 slot3y=0 slot4x=633 slot4y=479 slot5x=0 slot5y=0 slot6x=0 slot6y=479 stack_slot=5 newtables_slot=grid move_to_grid=preflop oldtables_duration=2 oldtables_slot=6 scan_mode=PW activate_most_urgent=0 activate_table_under_mouse=1 highlight_active_win=1 move_mouse_to_most_urgent=0 left_click_detection=1 stack_when_clicking_call_or_bet=0 stack_table_at_end_of_hand=1 drag_drop_swap_slots=1 minimize_to_tray=0 show_table_count_while_running=1 show_session_timer=0 move_888_popups=0 close_bovada_popups=1 stars_include_logged_in_as=0 notify_new_tables=1 notify_old_tables=1 notify_keep_in_grid=1 notify_ignore_table=1 notify_move_to_grid=0 notify_end_of_hand=0 notification_duration=2 hotkeys_fire_on_release=1 allow_action_hotkeys_on_ignored_tables=0 click_bet_for_betsize_hotkeys=0 also_keep_in_grid_when_move_to_slot_x=0 fold_checkbox_setting=Fold + Check/Fold also_stack_table_for_betsizeX=0 focus_betbox=0 detect_hidden_windows=0 play_mode=SaT table_count_gui_x=1811 table_count_gui_y=950 click_ftp_timebank=0 auto_accept_stars_waitlists=0 [general] show_walkthru=0 gui_x=1176 gui_y=541 last_tab= filename=BOX2.ini is_reloading=1 version=2.82a win_ver=6.1.7601 v=fu v282_msg=0 [sites] number_of_sites=1 included_sites=WinningPoker WinningPoker_included_executable_path=C:\BlackChipPoker\BlackChipPoker.exe WinningPoker_included_resized_table_width=658 WinningPoker_included_resized_table_height=495 WinningPoker_included_hole_x_coord=324 WinningPoker_included_hole_y_coord=349 WinningPoker_included_fold_color=0x713902 WinningPoker_included_call_color=0xac5e0f WinningPoker_included_bet_color=0xad5e0f WinningPoker_included_table_color_behind_holecard=0x6064c WinningPoker_included_flop_x_coord=241 WinningPoker_included_flop_y_coord=202 WinningPoker_included_table_color_behind_flop=0x141355 [hotkeys]

Posted by DS1 - 10-29-2015, 08:11 AM

When I am using non-aero themes (as i need to do for more tables and less lag), stack and tile reverts to pw mode. I remove and re-enter wpn, and things seem to go fine, but the tables move into the grid "preflop", clicking my "stack table" button stacks the tables, but they come right back into the grid without needed action!  Even though I have the setting in "layouts" set to "stackandtile, move to grid when action is required." IN the notepad I see: Move to grid=preflop on my other cpu, I have one  that says "when action required", on THAT notepad i see Move to grid=never ... So I tried putting that setting on the problem cpu, but then the tables wont move to grid What is the setting I need for "move to grid when action is required?