Thread Review (Newest First) |
Posted by beebeebee - 06-13-2019, 04:56 AM |
Sorry, somehow seems to be working now. It takes a few hands in a specific tournament before it "grabs" the table but all the other ones seems to be working fine now. Will post again with the info if it somehow stops working. |
Posted by SaT_Admin - 06-12-2019, 11:09 PM |
Paste me your custom site file that you have Included into SaT And also paste some diagnostic info from some tables like earlier in the thread |
Posted by beebeebee - 06-12-2019, 10:28 PM |
Unfortunately I think a recent update has broken this again, as a lot of the tables does not register and has to be manually added every time. Is there a chance you can help fix this again? |
Posted by SaT_Admin - 04-11-2018, 10:19 AM |
thumbsup |
Posted by beebeebee - 04-11-2018, 05:14 AM |
Only tried it once but seems to be working perfectly now, thank you so much! |
Posted by SaT_Admin - 04-10-2018, 11:57 PM |
Right so at the bottom you have added these two lines, but they were already defined earlier in the file, so you can remove those initial lines a few lines above: Code: table_include_title_text= And sorry I made a mistake, for the table_include_title_text we need the blinds separator which is the backslash "/" not the forward slash "\". I also for some reason put double closing brackets ]] in the classnames which was also sloppy of me. Try this whole file: Code: [settings] You'll need to save the file, and close and reopen SaT |
Posted by beebeebee - 04-10-2018, 04:41 PM |
I'm not quite sure what i'm supposed to change. Here is what my full file looks like now: [settings] standard_table_width=642 standard_table_height=391 buttons=fold,call,bet action_button=bet fold_button_x_coord=265 fold_button_y_coord=360 fold_button_region_topleft_x_coord=248 fold_button_region_topleft_y_coord=348 fold_button_region_bottomright_x_coord=248 fold_button_region_bottomright_y_coord=348 call_button_x_coord=298 call_button_y_coord=345 call_button_region_topleft_x_coord=317 call_button_region_topleft_y_coord=360 call_button_region_bottomright_x_coord=317 call_button_region_bottomright_y_coord=360 bet_button_x_coord=383 bet_button_y_coord=347 bet_button_region_topleft_x_coord=395 bet_button_region_topleft_y_coord=347 bet_button_region_bottomright_x_coord=395 bet_button_region_bottomright_y_coord=347 use_basic_click=0 table_class={AB5C3849-283D-407C-8D35-B94516547A2C} table_include_title_text=Ante table_exclude_title_text= use_lobby_pid_for_tables=1 lobby_title_text=^Unibet Poker lobby_class=\{[A-Z0-9]]{8}-[A-Z0-9]]{4}-[A-Z0-9]]{4}-[A-Z0-9]]{4}-[A-Z0-9]]{12}\} table_include_title_text=\ table_class=\{[A-Z0-9]]{8}-[A-Z0-9]]{4}-[A-Z0-9]]{4}-[A-Z0-9]]{4}-[A-Z0-9]]{12}\} Also I registered a cheap tournament just to get the table and it looks like this: title=[€1 - €50 Meteor Shower - 15/30 - Ante 4 (8268672)],class=[{5A7FEFD6-6898-46CC-BB4D-474F60198658}],pid=[69716] |
Posted by SaT_Admin - 04-10-2018, 04:14 AM |
Try adding these lines to the bottom of your custom site file: Code: use_lobby_pid_for_tables=1 and then change these lines to these: Code: table_include_title_text=\ this will require the "\" blinds separator to be in the table title, so that observed table wouldn't be detected.. hopefully normal tables do display the "\" character |
Posted by beebeebee - 04-10-2018, 03:23 AM |
Sorry, I got that to work now HEre is the main lobby and a tournament as well (observing) title=[Unibet Poker v2.16.0],class=[{C08326B0-90A2-4A04-8A13-BD7825E34CD5}],pid=[11992] title=[€4,000 Deep Impact - Spectator],class=[{C08326B0-90A2-4A04-8A13-BD7825E34CD5}],pid=[11992] |
Posted by SaT_Admin - 04-09-2018, 11:43 PM |
(04-09-2018, 10:23 PM)beebeebee Wrote: I can't get CRTL+SHIFT+ALT+T to work. It's supposed to copy the info so I can just copy/paste it right? Sorry for the confusion, first time trying to do the diagnostic. Yeah once you press that hotkey, you will get a popup showing the information. Are you seeing the popup? Are you getting any errors? And then it also automatically copies the same information to the clipboard, so you can simply CTRL+V to paste it. |
This thread has more than 10 replies. Read the whole thread. |