Thread Review (Newest First) |
Posted by SaT_Admin - 02-25-2020, 02:00 PM |
Another user had this problem today as well, we fixed it by turning off the minigames sidebar. That sidebar needs to be closed for SAT to work with BodogIgnition |
Posted by SaT_Admin - 01-31-2020, 02:37 AM |
(01-27-2020, 07:49 AM)bearsfan775 Wrote: I think I'm having the same issue, can't get the F10 portion of the setup to work properly on Bovada. Tried to use the version posted above and it didn't work Ok here is a temporary fix for everyone having the 'call' button not found error: Download this version 2.99.02r: http://www.stackandtile.com/sat/tmp/Stac...29902r.exe Then click File->Current Layout, and add this line at the top underneath [settings]: Code: [settings] Then go to the Layout tab and click Save Then try to Include the site, and tell me if it works If it still doesn't work, you can increase the number, Save, and then try again. User @bearsfan775 had to use 72 for it to work for him. We want the lowest possible number we can find that will work for you. Eventually this process will be removed. But let me know what number is working for you |
Posted by SaT_Admin - 01-27-2020, 11:52 AM |
(01-27-2020, 07:49 AM)bearsfan775 Wrote: I think I'm having the same issue, can't get the F10 portion of the setup to work properly on Bovada. Tried to use the version posted above and it didn't work Can you leave your skype name so I can work with you directly? |
Posted by bearsfan775 - 01-27-2020, 07:49 AM |
I think I'm having the same issue, can't get the F10 portion of the setup to work properly on Bovada. Tried to use the version posted above and it didn't work |
Posted by SaT_Admin - 01-14-2020, 05:44 AM |
cshrimp, can you try this version 2.99.02j? it worked for andreyluis http://www.stackandtile.com/sat/tmp/Stac...29902j.exe |
Posted by SaT_Admin - 01-11-2020, 04:21 AM |
I still would like to work with you directly. Please PM or email me your skype if you are willing. |
Posted by SaT_Admin - 01-02-2020, 08:07 AM |
(01-01-2020, 11:42 AM)cshrimpt Wrote: I have this working now. I had to use the custom site creator and even then, it complained that the buttons were black (they're not) and there was a problem. Just clicked OK a couple of times and it let me add the Ignition site as a custom site. There are some issues with this. Using a custom site means that you will only get barebones support, and some of the features won't work. Next, if SAT is thinking the buttons are black, then SAT won't be able to determine when action is required, and the tables will likely be failing this Test: https://www.stackandtile.com/sat/help/ta...ncorrectly My guess is that Test will fail for you. Is it? You shouldn't ignore the "button detected as black" message. The likely problem is your scan mode. In the built-in BodogIgnition site, SAT internally uses "PW" scan mode, since that's the only mode that has worked in my testing. You could try changing to that scan mode in advanced options, and try Removing and re-Including the site again, and let me know if you still get the "button detected as black" message, and also check the Test in that link above again. (01-01-2020, 11:42 AM)cshrimpt Wrote: I don't think this is an issue with your software. Probably something twitchy with the graphics setup on my PC. I have an Intel HD graphics 4600 with all the 3D/Quality stuff turned on. Could be that.Well, it may be something specific to your PC, however, a handful of people are having the same problems where SaT cannot find the 'call' button with the built-in BodogIgnition site, and so, I'd like to figure out what those specific PC problems are, so that I can fix the software to support those PCs |
Posted by cshrimpt - 01-01-2020, 11:42 AM |
I have this working now. I had to use the custom site creator and even then, it complained that the buttons were black (they're not) and there was a problem. Just clicked OK a couple of times and it let me add the Ignition site as a custom site. I don't think this is an issue with your software. Probably something twitchy with the graphics setup on my PC. I have an Intel HD graphics 4600 with all the 3D/Quality stuff turned on. Could be that. Works fine now though, just had to set it up manually. The predefined Ignition site worked properly on my Lenovo laptop so it's definitely something with my PC. Thanks, Craig |
Posted by SaT_Admin - 12-27-2019, 05:57 AM |
What visual effects are you talking about? Let me know. I definitely want to track down this issue. |
Posted by cshrimpt - 12-27-2019, 05:52 AM |
(12-26-2019, 02:23 PM)SaT_Admin Wrote:(12-26-2019, 05:33 AM)cshrimpt Wrote: I'm using Windows 10. I've been away for a while so please post if you find the solution. I tried it on a different Win 10 PC and it worked fine. The only major difference between the two machines is that I'm running with visual effects on the one that doesn't work. I'll switch those off and see if it fixes the issue. If not, I'll pm you my skype. Thanks, Craig |
This thread has more than 10 replies. Read the whole thread. |