Thread Review (Newest First) |
Posted by lacramioara - 01-19-2023, 07:47 PM |
Hey there! I've had a similar issue with my sports betting poker tables staying in the stack when action is needed. Have you tried reaching out to the support team for assistance? They may have some additional troubleshooting steps to try. Also, have you checked out any free sports picks resources? They can be really helpful in picking the right ods and platforms to play on. Good luck and I hope this will help you in your gambling adventure! |
Posted by lacramioara - 01-19-2023, 07:44 PM |
Hey there! I've had a similar issue with my sports betting poker tables staying in the stack when action is needed. |
Posted by SaT_Admin - 04-24-2021, 12:33 PM |
Ok so in case anyone else is reading or searching, the problem was that this user had placed his stack slot off-screen. We tried using all of the scan modes and none of them worked. But he said Ignition did work with the stack slot being off-screen. So the only conclusion is that the Chico software doesn't allow its tables to be scanned while off-screen, so unfortunately there is no good solution, other than to move the stack slot back on-screen. At least, the area of the stack slot where the buttons are (lower right hand of the table) needs to be on-screen |
Posted by - 04-24-2021, 05:39 AM |
(04-24-2021, 03:04 AM)SaT_Admin Wrote: Everything looks fine in your layout. Do you have the correct video settings inside Chico? Video settings look good, but "Hide Windows Switcher" is still unchecked because it is grayed out. Sure thing! Skype name is ....edited.. |
Posted by SaT_Admin - 04-24-2021, 03:04 AM |
Everything looks fine in your layout. Do you have the correct video settings inside Chico? https://www.stackandtile.com/sat/help/chico Can you leave your skype name? |
Posted by - 04-23-2021, 11:20 AM |
I tried changing the DPI settings in the shortcut properties. Also tried changing the scaling in the windows settings. Sure thing! I would really like to use this layout below. I love using it for Ignition so that I can have screen space for notes at the bottom of my desktop. Now if Sportsbetting would work it would be icing on the cake. haha. I've also tried basing the layout off of a Sportsbetting table FIRST, but haven't had any luck that way either. [settings] table_width=947 table_height=780 total_slots=6 slot1x=49 slot1y=990 slot2x=0 slot2y=0 stack_slot=1 newtables_slot=grid move_to_grid=preflop oldtables_duration=5 oldtables_slot=grid scan_mode=DWM play_mode=SaT slot3x=973 slot3y=0 slot4x=0 slot4y=0 slot5x=973 slot5y=0 slot6x=0 slot6y=0 [general] show_walkthru=0 gui_x=1421 gui_y=401 last_tab= filename=TwoTiles2.ini is_reloading=1 version=2.99.13 win_ver=10.0.19041 v=sm dpi=96 [sites] BodogIgnition_included_executable_path=C:\Ignition\Lobby.exe BodogIgnition_included_resized_table_width=947 BodogIgnition_included_resized_table_height=780 BodogIgnition_included_fold_color=0x1919d0 BodogIgnition_included_call_color=0x262626 BodogIgnition_included_bet_color=0x262626 BodogIgnition_included_scanmode=PW number_of_sites=2 included_sites=BodogIgnition,Chico Chico_included_executable_path=C:\Program Files (x86)\SportsBetting\GameClient.exe Chico_included_resized_table_width=947 Chico_included_resized_table_height=697 Chico_included_fold_color=0xff7b00 Chico_included_call_color=0xff7b00 Chico_included_bet_color=0xff7b00 Chico_included_scanmode=DWM [hotkeys] number_of_hotkeys=2 hotkey1action=Stack table hotkey1key=S hotkey2action=Bet Pot 33% hotkey2key=T send_table_under_mouse=1 |
Posted by SaT_Admin - 04-23-2021, 07:33 AM |
Doesn't make sense to me why this would happen if both stack slot and grid slots are on the same screen. Which solution did you try on that page? Can you click File->Current Layout, and paste me everything? |
Posted by - 04-23-2021, 06:06 AM |
(04-23-2021, 04:58 AM)SaT_Admin Wrote: Is your grid and stack on different monitors? And do those screens have different scaling %s in Windows? That could explain the issue. If so, please see this page: It's on just one screen, but I tried this anyway. No luck yet. |
Posted by SaT_Admin - 04-23-2021, 04:58 AM |
Is your grid and stack on different monitors? And do those screens have different scaling %s in Windows? That could explain the issue. If so, please see this page: https://www.stackandtile.com/sat/help/wi...caling-fix |
Posted by - 04-23-2021, 04:38 AM |
(04-22-2021, 06:55 PM)SaT_Admin Wrote:(04-22-2021, 11:38 AM)Guest Wrote: When having the diagnostics turned on it says "Yes" when it is my action, but still stays in the stack. It does change from NO to YES and back NO after I've acted on my first hand when it is in the grid. Since it starts off in the grid by default. Once I fold and it goes to the stack it just stays in the stack as NO and doesn't come back to the grid. Move To Grid setting is When action required |
This thread has more than 10 replies. Read the whole thread. |