| Thread Review (Newest First) |
| Posted by SaT_Admin - 08-09-2021, 01:17 AM |
(08-08-2021, 11:26 PM)rohansawant Wrote: And the tables get timed out even when someone is not all-in.Hmmmmmm ok then (08-08-2021, 11:26 PM)rohansawant Wrote: I think the Pocket52 tables are based on so different platform as they turn white frequently which is the reason Sat doesn't recognize the tables.Well they are built on top of Chrome, which is why we are required to use PW scan mode. But other sites are also built on that, such as WinningPoker and Bodog, and those tables don't turn white. So not sure. Keep your eye open if you get any other ideas |
| Posted by rohansawant - 08-08-2021, 11:26 PM |
(08-06-2021, 01:14 AM)SaT_Admin Wrote: Another user just emailed me about pocket52 and there is another issue: Sorry for the delay in response. The screenshot looks okay. And the tables get timed out even when someone is not all-in. I think the Pocket52 tables are based on so different platform as they turn white frequently which is the reason Sat doesn't recognize the tables. |
| Posted by SaT_Admin - 08-06-2021, 01:14 AM |
|
Another user just emailed me about pocket52 and there is another issue: normally the buttons are centered like in this image: https://imgur.com/AmVkCy1 however, when facing an all-in, the buttons are moved over to the side: https://imgur.com/CVUm4ms This could be a reason why some of your tables were timing out. Because SAT would not be detecting the fold button in this case |
| Posted by SaT_Admin - 08-05-2021, 01:27 AM |
|
Unfortunately I have no other ideas. You will definitely have to use PW scan mode for this site. But if SAT is scanning the table as white sometimes, then SAT just might not work on this site for whatever reason If you use the menu item for Help -> Diagnostic -> Take screenshot with PW and save the screenshot file, when you open up the screenshot file, does it look ok? |
| Posted by rohansawant - 08-04-2021, 07:13 PM |
|
Stack slot is located on the same screen. GDIP scan mode has failed. [settings] standard_table_width=588 standard_table_height=460 buttons=fold,call,bet action_button=fold fold_button_x_coord=271 fold_button_y_coord=423 fold_button_region_topleft_x_coord=230 fold_button_region_topleft_y_coord=415 fold_button_region_bottomright_x_coord=276 fold_button_region_bottomright_y_coord=435 call_button_x_coord=356 call_button_y_coord=423 call_button_region_topleft_x_coord=311 call_button_region_topleft_y_coord=417 call_button_region_bottomright_x_coord=358 call_button_region_bottomright_y_coord=436 bet_button_x_coord=430 bet_button_y_coord=423 bet_button_region_topleft_x_coord=387 bet_button_region_topleft_y_coord=416 bet_button_region_bottomright_x_coord=440 bet_button_region_bottomright_y_coord=436 use_basic_click=0 table_class=Chrome_WidgetWin_1 table_include_title_text=\d/ table_exclude_title_text= |
| Posted by SaT_Admin - 08-03-2021, 09:04 PM |
|
The tables appearing white might mean that SAT is having difficulty scanning the tables, which would be a bad sign. But its strange that they don't stay white. This could be the reason why tables are timing out. Where is your stack slot located? Is it off-screen? I'm not really sure what else to try.. I suppose you could try Removing and re-Including again, and again click the ... button but this time try using GDIP scan mode, and see if that works and you don't get the "button detected as black" error. But usually if DWM fails then GDIP fails too. Can you paste me your custom site file for pocket52? You can find it in this folder: C:\Program Files (x86)\StackAndTile\Sites\ |
| Posted by rohansawant - 08-03-2021, 03:46 PM |
The white color tables appear this way for a second and then they appear in color![[Image: pc3.png]](https://i.postimg.cc/qqvmTPZw/pc3.png)
|
| Posted by rohansawant - 08-03-2021, 03:38 PM |
As you can see in the below image, in the taskbar icon, some tables have not popped out and timed out. (if you can see the i am back button on bottom right in image number 2 and 5)![[Image: pc1.png]](https://i.postimg.cc/pX9xH4jq/pc1.png) And in this image some tables have popped out, this is very bizarre. One thing I noticed is when I hover my mouse over the task bar icon the tables pop out and they seem to be blank white. ![[Image: pc2.png]](https://i.postimg.cc/N02pG8Dh/pc2.png)
|
| Posted by SaT_Admin - 08-03-2021, 02:12 AM |
|
It looks like SAT is correctly detecting the colors of the buttons now You said earlier that SOME tables DO move out into the grid successfully? In that case, which ones DONT? Does it fail when you can check for free? Does it fail when you are facing an allin? Can you provide screenshots of both cases? Perhaps we need to add more action buttons other than just 'fold' to your custom site file.. |
| Posted by rohansawant - 08-03-2021, 02:08 AM |
|
[settings] table_width=588 table_height=460 total_slots=8 slot1x=0 slot1y=0 slot2x=444 slot2y=0 slot3x=888 slot3y=0 slot4x=1332 slot4y=0 slot5x=0 slot5y=495 slot6x=443 slot6y=495 stack_slot=1 newtables_slot=grid move_to_grid=preflop oldtables_duration=5 oldtables_slot=grid scan_mode=DWM play_mode=SaT slot7x=883 slot7y=495 slot8x=1332 slot8y=495 activate_most_urgent=1 activate_table_under_mouse=1 play_sound_when_action_req=0 highlight_active_win=1 move_mouse_to_most_urgent=0 move_mouse_if_not_over_table=0 left_click_detection=1 stack_when_clicking_call_or_bet=0 stack_table_at_end_of_hand=0 drag_drop_swap_slots=1 allow_dragdrop_on_stack_tables=1 minimize_to_tray=0 show_table_count_while_running=0 show_actionreq_count=0 show_session_timer=0 show_random_number=0 move_888_popups=1 bring_bodog_popups_above=1 stars_include_logged_in_as=0 notify_new_tables=0 notify_old_tables=0 notify_keep_in_grid=0 notify_ignore_table=0 notify_move_to_grid=0 notify_end_of_hand=0 notify_bodog_timebank=0 notify_party_spins=0 notification_duration=3 hotkeys_fire_on_release=0 allow_action_hotkeys_on_ignored_tables=1 click_bet_for_allin_hotkey=0 click_bet_for_betsize_hotkeys=0 click_bet_for_betxbb_hotkeys=0 click_bet_for_betpot_hotkeys=0 send_betsizes_in_bbs=0 also_keep_in_grid_when_move_to_slot_x=0 click_button_for_increase_decrease_bet=1 fold_checkbox_setting=Fold also_stack_table_for_betsizeX=0 also_stack_table_for_allin=0 focus_betbox=0 detect_hidden_windows=0 auto_accept_stars_waitlists=0 click_stars_info_tab=0 click_bodog_timebank=1 gg_mouse_down_fix= party_click_im_back=0 no_basic_click_for_wpn=0 winamax_border_fix= use_old_bodog_click_method=0 [general] show_walkthru=0 gui_x=1187 gui_y=265 last_tab= filename=pock52.ini is_reloading=0 version=2.99.13x-highDPI win_ver=10.0.19043 ggbetsize_msg=0 dpi=120 v=fu [sites] number_of_sites=1 included_sites=pock52 pock52_included_executable_path=C:\Program Files\Pocket52Poker\Pocket52Poker.exe pock52_included_resized_table_width=588 pock52_included_resized_table_height=461 pock52_included_fold_color=0x1320c6 pock52_included_call_color=0x29a4fd pock52_included_bet_color=0x287f4a pock52_included_scanmode=PW [hotkeys] number_of_hotkeys=22 send_table_under_mouse=1 hotkey1action=Ignore table hotkey1key=I hotkey2action=Bet hotkey2key=H hotkey3action=Activate next table in queue hotkey3key=N hotkey4action=Activate previous table in queue hotkey4key=M hotkey5action=Call hotkey5key=Space hotkey6action=Keep table in grid hotkey6key=K hotkey7action=Move table to Next slot hotkey7key=. hotkey8action=Move table to Previous slot hotkey8key=, hotkey9action=Stack table hotkey9key=S hotkey10action=Call hotkey10key=XButton2 hotkey11action=Keep table in grid hotkey11key=Y hotkey12action=Bet hotkey12key=XButton1 hotkey13action=Move table Up hotkey13key=Up hotkey14action=Move table Down hotkey14key=Down hotkey15action=Move table Left hotkey15key=Left hotkey16action=Move table Right hotkey16key=Right hotkey17action=Stack all tables hotkey17key=A hotkey18action=Tile all tables hotkey18key=Q hotkey19action=Keep all tables in grid hotkey19key=Z hotkey20action=Start/Stop SaT hotkey20key=Esc hotkey21action=Fold + Stack table hotkey21key=T hotkey22action=Fold + Stack table hotkey22key=RButton |
| This thread has more than 10 replies. Read the whole thread. |