Thread Review (Newest First) |
Posted by DaradBur - 04-08-2025, 08:57 PM |
Hi, I've looked at yesterday's session and documented every occurrence. I don't see any reliable pattern: 1. New tournament, CO RFI. 1 other Winamax table tiled, no action required. PS, iPoker and Wina tables stacked, none active. 2. BTN vs HJ, 2 other Wina tables tiled, 1 with action required. 3. New tournament, first hand, LJ RFI. No other tables tiled. 4. HJ RFI, 2 other Wina tables tiled, w/o action required. 5. BB vs BTN, 2 Wina / 2 iPoker tables tiled, 1 action required. (The 2nd iPoker table was tiled immediately after with action required) 6. SB vs BTN, 2 Wina / 1 ipoker tables, no action required. 7. HJ RFI, 2 Wina tables tiled, 1 action required 8. New tournament, CO vs HJ, no other table tiled 9. SB vs BTN, 1 PS / 4 Wina tables tiled, no action required 10. CO vs HJ, 1 PS / 1 Wina tables tiled, 1 action required 11. CO RFI, 2 wina tables tiled, no action required I've cut the video recording to a 30s one showing a specific occurrence. I've contacted you on Skype with the shortened log and video. |
Posted by SaT_Admin - 04-07-2025, 12:57 PM |
(04-07-2025, 07:14 AM)DaradBur Wrote: Don't really know what this means, but I have two layouts, for <= 6 tables, and a stack and tile one for more.the Play Mode is a setting on the Layout tab.. but yes I was curious if you were using Stack and Tile mode (04-07-2025, 07:14 AM)DaradBur Wrote: If you could provide a custom version that writes a log each time a table becomes active, with the timestamp, that might helpIf you use the menu item for Help->Logging, it will log this information and much more. But for an issue like this it also helps to cross reference what we actually see on the table. Like for example, maybe the first hand of the tournament, you were in BB and it got checked around, and you could check for free? Maybe thats the scenario where this problem always happens? Etc. The log file won't be able to know that |
Posted by DaradBur - 04-07-2025, 07:14 AM |
>Also, what Play Mode are you using in SAT? Don't really know what this means, but I have two layouts, for <= 6 tables, and a stack and tile one for more. The issue arises when I use the latter. >when this happens, is a Stars table the current active table? Not necessarily, I've had it happen 8 times tonight, and once it was the very first hand of a Winamax tournament, which started when all other tables were still on break. I will review the footage tomorrow, even though I don't think I'll find a convincing pattern. If you could provide a custom version that writes a log each time a table becomes active, with the timestamp, that might help |
Posted by SaT_Admin - 04-07-2025, 01:45 AM |
What I'm curious is, the times when this happens, is a Stars table the current active table? Also, what Play Mode are you using in SAT? |
Posted by DaradBur - 04-04-2025, 04:54 PM |
It only happened twice yesterday, here are some details: Both times, clicking on the Winamax toolbar icon brought two tables. first at half time bank, the second with almost a full time bank (~14s out of 15). It takes two seconds for the time bank to start running, so it doesn't seem to be a coincidence. I think this issue blocks all Winamax tables. Both blocked table situations were different: - SB v MP RFI, with two tables already tiled (PS / Wina) - BTN RFI, with one Wina table tiled. I'll continue recording the sessions to try to pin it down. |
Posted by SaT_Admin - 04-02-2025, 01:02 AM |
ok |
Posted by DaradBur - 04-02-2025, 12:47 AM |
>what other sites are you playing when this happens Stars and Winamax. I've played a bit with 1 table of each, and ACTION REQUIRED behaved as expected. I'll record next sessions, and note timestamps when I see the behavior occurring. It might help finding a pattern. |
Posted by SaT_Admin - 04-01-2025, 07:59 AM |
Hmmmm what other sites are you playing when this happens? Do you always notice another specific site at the top when this problem occurs? I'd run Help->Show Testing Info, and test with one table at a time, make sure the ACTION REQUIRED line changes from NO to YES when its your turn to act, and then changes back to NO after youve taken your action Then test with one table for the next site, etc, and check again If SAT mistakenly thinks that another site ALWAYS requires action, then it won't allow Winamax (or other sites too) to pop over the top because it thinks you haven't finished your action. If you find another site always says ACTION REQUIRED = YES, and never changes, then you would try Removing and re-Including that particular site and then re-test |
Posted by DaradBur - 04-01-2025, 03:19 AM |
Hi, after a few days I get a somewhat different problem. I often hear the Winamax 'hurry up' sound, but this time clicking on the Winamax icon in the Windows taskbar is enough to make the table appear. |
Posted by DaradBur - 03-25-2025, 06:49 AM |
So far so good, no issues after re-adding the site, thanks! |
This thread has more than 10 replies. Read the whole thread. |