Post a New Reply
Reply to thread: Preliminary Cake2 (Revolution?) support
Username:
Please select the number: 3	1 2 3 4 5 6 7 8 9 10
Post Subject:
Your Message: Smilies	[quote="SaT_Admin" pid='939' dateline='1342820915'] Ok I've only tested this on Cake2, but as long as the tables are the same with just different skin graphics, it should work across the network. I will be looking into it more deeply in the coming week or two. Note 1, this will only work if you are using 'DWM' setting for ScanMode in Advanced Options. This should be the default as long as you are using Windows Vista/7 with Aero theme enabled. No other scan modes will work with cake's garbage software. Even DWM scan mode will sometimes report black colors when trying to scan the table, which of course will not work. Note 2, currently, I'm pretty sure SaT will fail to detect a Cake2 table as needing action when someone shoves, and you are last to act and cover him. Another Cake quirk. In that case, SaT will think the table DOES NOT need action, and will likely not pop into grid. Treat this "preliminary support" as such. When full support is ready and tested, it will be included. You will need a different config depending upon your Windows display settings and also depending on your grid slot size. You can get your Windows display settings by following the instructions on [url=http://www.sevenforums.com/tutorials/443-dpi-display-size-settings-change.html]this page[/url] (step4). You can get your SaT grid slot size by clicking File->Current Layout and looking at the "table_width" setting at the top of the file. [b]For Windows display settings at 100% (96 DPI):[/b] if your table_width is <= 640, use [url=http://www.stackandtile.com/sat/cake2test_100SMALL.ini]cake2test_100SMALL.ini[/url] otherwise, use [url=http://www.stackandtile.com/sat/cake2test_100BIG.ini]cake2test_100BIG.ini[/url] [b]For Windows display settings at 125% (120 DPI):[/b] if your table_width is <= 800, use [url=http://www.stackandtile.com/sat/cake2test_125SMALL.ini]cake2test_125SMALL.ini[/url] otherwise, use [url=http://www.stackandtile.com/sat/cake2test_125BIG.ini]cake2test_125BIG.ini[/url] (right click, save as) Drop the appropriate file into the folder: C:\Program Files\StackAndTile\Sites Then open up SaT, click on the Sites tab, click on the dropdown, scroll to the bottom and you should see a new site listed: cake2test Select cake2test and then Include Site as usual. You'll want to ensure that this option is off in the settings [url=http://stackandtile.com/sat/cake2autofocus.PNG]cake poker option[/url] All this will hopefully be automated in the next update. You can see why I've resisted to support Cake2 for so long. This site is the absofuckinglute nut low worst of all poker clients. I should boycott those motherfuckers completely but the USA sucks too [/quote]
Post Options:	Disable Smilies: disable smilies from showing in this post.
Thread Subscription: Specify the type of notification and thread subscription you'd like to have to this thread. (Registered users only)	Do not subscribe to this thread Subscribe without receiving any notification of new replies Subscribe and receive email notification of new replies Subscribe and receive PM notification of new replies
Image Verification Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.	(case insensitive)

Thread Review (Newest First)

Posted by SaT_Admin - 07-21-2012, 07:48 AM

Ok I've only tested this on Cake2, but as long as the tables are the same with just different skin graphics, it should work across the network. I will be looking into it more deeply in the coming week or two. Note 1, this will only work if you are using 'DWM' setting for ScanMode in Advanced Options. This should be the default as long as you are using Windows Vista/7 with Aero theme enabled. No other scan modes will work with cake's garbage software. Even DWM scan mode will sometimes report black colors when trying to scan the table, which of course will not work. Note 2, currently, I'm pretty sure SaT will fail to detect a Cake2 table as needing action when someone shoves, and you are last to act and cover him. Another Cake quirk. In that case, SaT will think the table DOES NOT need action, and will likely not pop into grid. Treat this "preliminary support" as such. When full support is ready and tested, it will be included. You will need a different config depending upon your Windows display settings and also depending on your grid slot size. You can get your Windows display settings by following the instructions on this page (step4). You can get your SaT grid slot size by clicking File->Current Layout and looking at the "table_width" setting at the top of the file. For Windows display settings at 100% (96 DPI): if your table_width is <= 640, use cake2test_100SMALL.ini otherwise, use cake2test_100BIG.ini For Windows display settings at 125% (120 DPI): if your table_width is <= 800, use cake2test_125SMALL.ini otherwise, use cake2test_125BIG.ini (right click, save as) Drop the appropriate file into the folder: C:\Program Files\StackAndTile\Sites Then open up SaT, click on the Sites tab, click on the dropdown, scroll to the bottom and you should see a new site listed: cake2test Select cake2test and then Include Site as usual. You'll want to ensure that this option is off in the settings cake poker option All this will hopefully be automated in the next update. You can see why I've resisted to support Cake2 for so long. This site is the absofuckinglute nut low worst of all poker clients. I should boycott those motherfuckers completely but the USA sucks too