Thread Review (Newest First) |
Posted by SaT_Admin - 01-11-2013, 07:45 AM |
What do you mean with no luck? Did it work at all when using Stars to pop up tables? Did it fail in the same way when things get 'busy'? Here's the thing: I'm fairly certain that nothing is jumping the queue, because if it were, then it would be happening all the time. My guess? When things get 'busy', you enter a pot with call/bet and the table leaves the stack and moves into grid. Once this happens, the next table underneath in the stack becomes visible to you. However, this table is not necesarily the next most urgent table in the queue. The stack just HOLDS all the tables. That's it. SaT will keep track of the next table needing action, and will bring that table to the top of the stack. And when it does, you perceive that something has jumped the queue, when in fact it was SaT simply bringing up the next table in line. You tried to act on the other table simply because it became visible when the top table moved out, while SaT was in the process of bringing up the next most urgent table. If this is in fact what is happening, then one solution would be to speed up SaT's scanning speed, which would bring the tables up faster, hopefully before you attempt to act on a table in the stack that is not the most urgent. The default engine speed is 300ms when using DWM scan mode. You can try faster speeds using this setting in your config file: Code: [settings] Try that and see how it goes. That would cut the delay between scans in half from the default, essentially doubling the scan speed. Keep in mind, the shorter the delay, the more CPU usage you will encounter. |
Posted by thearthurdog - 01-11-2013, 05:28 AM |
i tried that with no luck. just to add more info, this only happens when things are 'busy'. i normally play 18-20 tables. if i am able to make quick decisions and get tables out of the way, it is fine, but if it is 'busy' then sometimes (and only sometimes) a table will jump the queque, all I want is for my tables to stay in order, with no movement based on anything other than the order they came up in |
Posted by SaT_Admin - 01-10-2013, 02:45 PM |
(01-10-2013, 02:43 PM)thearthurdog Wrote: i tried changing this - activate_most_urgent=1 - to 0, but then no tables came to the top. If you set that to 0 and no tables popped up, then you must have this PokerStars setting turned off: http://www.stackandtile.com/sat/help/pokerstars Can you confirm that? Last time, you told me that you were gonna turn that setting ON in PokerStars, and then turn SaT's setting off. Can you try swapping them ? |
Posted by thearthurdog - 01-10-2013, 02:43 PM |
the second bit i did - so it should work this is actually a new layout but based on the old one. i tried changing this - activate_most_urgent=1 - to 0, but then no tables came to the top. my pokerstars settings i believe are all good, |
Posted by thearthurdog - 01-10-2013, 02:41 PM |
[settings] send_new_tables_to_bottom=1 table_width=640 table_height=468 total_slots=9 slot1x=-1920 slot1y=0 slot2x=-1280 slot2y=0 slot3x=-640 slot3y=0 stack_slot=2 newtables_slot=2 move_on_street=preflop oldtables_duration=10 oldtables_slot=2 scan_mode=DWM move_to_grid=never play_mode=SaT activate_most_urgent=1 highlight_active_win=0 move_mouse_to_most_urgent=0 left_click_detection=1 stack_table_at_end_of_hand=0 check_holecard_for_end_of_hand=0 drag_drop_swap_slots=1 minimize_to_tray=0 show_table_count_while_running=0 notify_new_tables=0 notify_old_tables=0 notify_keep_in_grid=0 notify_ignore_table=0 notify_action_required=0 notify_end_of_hand=0 notification_duration=3 slot4x=-1920 slot4y=468 slot5x=-1280 slot5y=468 slot6x=-640 slot6y=468 slot7x=0 slot7y=0 slot8x=0 slot8y=467 slot9x=640 slot9y=0 [general] show_walkthru=0 gui_x=-2383 gui_y=619 last_tab= is_reloading=0 version=2.2.0.1 v=fu [sites] PokerStarsNova_included_executable_path=C:\Program Files (x86)\PokerStars\PokerStars.exe PokerStarsNova_included_resized_table_width=640 PokerStarsNova_included_resized_table_height=468 PokerStarsNova_included_fold_color=0x535353 PokerStarsNova_included_call_color=0x535353 PokerStarsNova_included_bet_color=0x565656 number_of_sites=1 included_sites=PokerStarsNova [hotkeys] number_of_hotkeys=3 hotkey1action=Keep table in grid hotkey1key=K hotkey2action=Fold + Stack table hotkey2key=~RButton hotkey3action=Move table to Next slot hotkey3key=XButton1 send_table_under_mouse=1 |
Posted by SaT_Admin - 01-09-2013, 01:22 PM |
(01-09-2013, 12:40 PM)arthurdog@gmail.com Wrote: I still get the occasional 'urgent' table that jumps the queue to get to the top. This always results in a misclick. I have changed the setting you suggested last time, but still seems to not work all the time. Last time you said you were playing on Stars only, and you were using the Stars option to pop tables to the top? And you turned off all of SaT's options for bringing tables to the top? Can you confirm what your Stars setting is? And also post your full SaT config again? Quote:Also, how do I stop new tables going to the top of the stack? I want them in the stack, but not at the top. This option has been available for a while, I just never documented it on the website. I've now added it to the Extra Advanced Options help page Add this line to your layout config file, under the [settings] heading: Code: send_new_tables_to_bottom=1 |
Posted by arthurdog@gmail.com - 01-09-2013, 12:40 PM |
Still having some problems. I still get the occasional 'urgent' table that jumps the queue to get to the top. This always results in a misclick. I have changed the setting you suggested last time, but still seems to not work all the time. Also, how do I stop new tables going to the top of the stack? I want them in the stack, but not at the top. Thanks. |