| Thread Review (Newest First) |
| Posted by aernout - 02-16-2014, 05:13 AM |
| Got it working now by combining it with TN2 as you said, thanks a ton! |
| Posted by aernout - 02-16-2014, 04:17 AM |
| Thought of adding delay to the macro which I have attached to the key itself. But I already figured that won't work since the macro does already activate. I'll try combining TN2 hotkeys as you said. |
| Posted by SaT_Admin - 02-16-2014, 03:49 AM |
| How do you plan on doing that? |
| Posted by aernout - 02-16-2014, 03:14 AM |
| hmmmm that could be, I'll try inserting a delay into the keybinding itself. |
| Posted by SaT_Admin - 02-16-2014, 02:53 AM |
|
That is definitely strange. If you are seeing the button being pressed then I think the hotkey is obviously working, but the table just isn't registering it. Perhaps its processing too fast or something. I'm not sure if I know how to fix this right now. A workaround is to use TN2 for your Bet hotkey as I described above, and then set up a 'Stack Table' hotkey in SaT to correspond, remembering to use the ~ prefix within SaT. The ~ will allow SaT to pass the key combination through to other programs, instead of just taking it over altogether. |
| Posted by aernout - 02-16-2014, 02:30 AM |
| Okay, I've tried with the classic theme aswell and it didn't work with that either. Also I have tried to use it with a different hotkey aswell and that didn't work either. Funny thing is that I can actually see the button raise being pressed, but it doesn't raise... |
| Posted by SaT_Admin - 02-16-2014, 02:17 AM |
| I just tested it and it worked for me. Are you sure you don't have that key combination still set up as a hotkey within TN2 or some other software? Can you try a different key and see if it works? |
| Posted by aernout - 02-16-2014, 02:05 AM |
| Thanks a lot, That fixed it for the fold and call button. My Bet hotkey still doesn't work though. I'm using the hypersimple pokerstars theme, which I added as a site aswell. |
| Posted by SaT_Admin - 02-16-2014, 01:47 AM |
(02-16-2014, 01:35 AM)aernout Wrote: Oh and this is on Pokerstars and I was using the following hotkey combinations: <^O, <^Y, <^T. Well if the buttons are getting pressed, then we can assume that the keys are working. If you suspect the keys aren't working at all, then try a basic key such as 'A' just to test (02-16-2014, 01:30 AM)aernout Wrote: I recently tried the trial version and I used it alone with TN2 for the hotkeys. However the tables were not moving back to the stack. You can use the TN2 hotkeys if you want. However, if you want SaT to also move tables back to the stack, then you would need to set up the same hotkeys in SaT. The only difference is that you would use the ~ prefix for the key. So for example, usually people want tables to go back to the stack when they use their Fold hotkey. TN2 Fold hotkey = A SaT 'Stack Table' hotkey = ~A Quote:So I searched a little and came to notice you have to use hotkeys of the program itself. You don't have to, but it is recommended to keep all the hotkeys in one place. Sometimes there can be some weird errors but usually it can work as described above. Quote:So I set all the keys up (bet, call and fold). The bet hotkey wasn't functioning at all. What theme are you using? Make sure you only have one Stars site included into SaT and make sure its the correct theme. If you've modded your table further then that could be the problem too. Quote: The call and fold hotkey were functioning but they weren't moving my tables back to the stack itself. Any idea on how to fix this problem If you want to send the table back to the stack with each action, then you need to set up the +Stack versions of the hotkeys: Fold+Stack Call+Stack Bet+Stack |
| Posted by aernout - 02-16-2014, 01:35 AM |
| Oh and this is on Pokerstars and I was using the following hotkey combinations: <^O, <^Y, <^T. |
| This thread has more than 10 replies. Read the whole thread. |
