| Thread Review (Newest First) |
| Posted by SaT_Admin - 03-23-2015, 03:10 AM |
(03-22-2015, 08:49 AM)BigAnaconda Wrote: If i put my mouse cursor over someones name, a black window will cover slot1. Please do as I instructed in post #11 and paste the results Quote:Also Hrmmm what do you mean that it starts flashing? This shouldn't be happening. Does TigerGaming pass the Test described on this page? http://www.stackandtile.com/sat/help/tab...stay-stack |
| Posted by BigAnaconda - 03-22-2015, 08:49 AM |
|
Hi, Having similiar problems as OP. If i put my mouse cursor over someones name, a black window will cover slot1. Also I play Hu and my setup is like...Slot 1 is stack, 2, 3 and 4 are the grid. If I am playing 3 matches already, so slot 2, 3 and 4 are filled and slot 1 has all my empty tables. Lets say slot 2 is tigergaming table. If a 4th player comes to sit on some other table in slot 1, my tigergaming table will just start flashing and i cannot click any buttons. I have to do some action on slot 3 or 4, then send that table back to the stack, then the table from slot 1 will obviously replace 3 or 4, then I have to do action for this new table, and then TG will stop clicking and I can press action button again. Other than this, your software is awesome. |
| Posted by mmd - 02-13-2015, 07:54 PM |
|
Hi I'm into day 2 of the trial period having not used the software for a while but I'm having some problems with tiger gaming too. I'll try and describe my problem in more detail later when I get onto the PC and have access to the config file I setup. |
| Posted by SaT_Admin - 02-13-2015, 10:04 AM |
| And then what happens? A big window moves to the next grid slot? If so, then use Help -> Diagnostic -> Get Window Title on that window and paste me the results |
| Posted by Stelian - 02-13-2015, 09:51 AM |
|
Ok I did it: table_include_title_text=/ And it didn't work. There is "New table detected" everytime I drag my moues over player |
| Posted by SaT_Admin - 02-12-2015, 10:58 AM |
(02-12-2015, 05:48 AM)Stelian Wrote: Hey, I have the same 2 problems with SaT and it prevents me from using it What problems? The same as the OP posted? I have no clue about the betbox unfocusing. For the other problem, mousing over an area, do you get a Notification from SaT saying "New Table detected"? You can try using the "/" character for the blinds separator for the 'include_title' setting: Code: table_include_title_text=/(02-12-2015, 05:55 AM)Stelian Wrote: And one more problem: The fold button doesn't click the fold button before it's my turn to act Then obviously those coordinates do not line up with the fold checkbox as well. You can try defining these coordinates instead: Code: fold_checkbox_x_coord= |
| Posted by Stelian - 02-12-2015, 05:55 AM |
|
site. ini: [settings] standard_table_width=612 standard_table_height=486 buttons=fold,call,bet action_button=fold fold_button_x_coord=331 fold_button_y_coord=441 fold_button_region_topleft_x_coord=331 fold_button_region_topleft_y_coord=432 fold_button_region_bottomright_x_coord=356 fold_button_region_bottomright_y_coord=446 call_button_x_coord=440 call_button_y_coord=453 call_button_region_topleft_x_coord=401 call_button_region_topleft_y_coord=441 call_button_region_bottomright_x_coord=477 call_button_region_bottomright_y_coord=465 bet_button_x_coord=549 bet_button_y_coord=452 bet_button_region_topleft_x_coord=508 bet_button_region_topleft_y_coord=439 bet_button_region_bottomright_x_coord=584 bet_button_region_bottomright_y_coord=468 use_basic_click=1 table_class=wxWindowClassNR table_include_title_text= table_exclude_title_text=Tiger Gaming version 8.2.12 Current layout: [settings] table_width=608 table_height=483 total_slots=7 slot1x=-1920 slot1y=0 slot2x=0 slot2y=0 slot3x=606 slot3y=0 slot4x=1214 slot4y=0 slot5x=0 slot5y=482 slot6x=606 slot6y=481 slot7x=1214 slot7y=481 stack_slot=1 newtables_slot=grid move_to_grid=preflop oldtables_duration=5 oldtables_slot=grid scan_mode=DWM play_mode=SaT activate_most_urgent=1 activate_table_under_mouse=1 highlight_active_win=0 move_mouse_to_most_urgent=0 left_click_detection=1 stack_when_clicking_call_or_bet=0 stack_table_at_end_of_hand=0 drag_drop_swap_slots=1 minimize_to_tray=0 show_table_count_while_running=0 show_session_timer=0 move_888_popups=1 close_bovada_popups=1 notify_new_tables=1 notify_old_tables=1 notify_keep_in_grid=1 notify_ignore_table=1 notify_move_to_grid=0 notify_end_of_hand=0 notification_duration=3 hotkeys_fire_on_release=0 allow_action_hotkeys_on_ignored_tables=1 click_bet_for_betsize_hotkeys=0 also_keep_in_grid_when_move_to_slot_x=0 also_click_checkfold_checkbox=1 also_stack_table_for_betsizeX=0 focus_betbox=1 [general] show_walkthru=0 gui_x=-32000 gui_y=-32000 last_tab= filename=tigur8.ini is_reloading=0 version=2.75 v=fu [sites] number_of_sites=1 included_sites=tigurve tigurve_included_executable_path=C:\Program Files (x86)\Tiger Gaming 8.2\Tiger Gaming.exe tigurve_included_resized_table_width=608 tigurve_included_resized_table_height=483 tigurve_included_fold_color=0x262626 tigurve_included_call_color=0x0 tigurve_included_bet_color=0x3a90db [hotkeys] number_of_hotkeys=4 hotkey1action=Fold hotkey1key=D hotkey2action=Call hotkey2key=A hotkey3action=Bet hotkey3key=Space hotkey4action=Increase bet hotkey4key=W send_table_under_mouse=1 And one more problem: The fold button doesn't click the fold button before it's my turn to act |
| Posted by Stelian - 02-12-2015, 05:48 AM |
| Hey, I have the same 2 problems with SaT and it prevents me from using it |
| Posted by SaT_Admin - 01-03-2015, 05:42 AM |
| Hrm then SaT shouldn't be de-focusing the betbox. Have you tried turning off the option to "focus betbox" in Advanced Options? Also, are you using SaT for any other sites? |
| Posted by massiv - 01-03-2015, 05:04 AM |
Oh sry  D I am betting by clicking with mouse or typing in betsize, no hotkeys are used.
|
| This thread has more than 10 replies. Read the whole thread. |