+- StackAndTile Forums (https://www.stackandtile.com/forum)
+-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1)
+--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2)
+--- Thread: 3 Monitor setup, missing slots (/showthread.php?tid=1325)
3 Monitor setup, missing slots - Saki - 04-20-2016
I've attached some screen shots of my resolution monitor setup. It's 3 LCDs on their side each 1080 x 1920.
When I setup a default layout with SaT, it defaults 30 slots but I can't find slots, 5, 6, 11, 12, 17, 18, 23, 24
The screen shot shows exactly where the tables I see get placed. There's no slots underneath slots too.
![[Image: missing_tables.png]](http://s5.postimg.org/utn0rhg9f/missing_tables.png)
![[Image: missing_tables_res.png]](http://s5.postimg.org/orfe0zrtf/missing_tables_res.png)
RE: 3 Monitor setup, missing slots - SaT_Admin - 04-20-2016
Unforunately, you'll probably need to use the - button and remove slots down to the number that you can see, which in this case is 4. And then you'll need to use the + button to add the slots back. And then use Visualize Grid and place them yourself. Sometimes this happens if SaT is incorrectly detecting the Windows resolution for whatever reason
RE: 3 Monitor setup, missing slots - Saki - 04-20-2016
(04-20-2016, 11:05 AM)SaT_Admin Wrote: Unforunately, you'll probably need to use the - button and remove slots down to the number that you can see, which in this case is 4. And then you'll need to use the + button to add the slots back. And then use Visualize Grid and place them yourself. Sometimes this happens if SaT is incorrectly detecting the Windows resolution for whatever reason
Great! Thank you