Pokerstars.es not working with SaT - Printable Version +- StackAndTile Forums (https://www.stackandtile.com/forum) +-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1) +--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2) +--- Thread: Pokerstars.es not working with SaT (/showthread.php?tid=1843) |
Pokerstars.es not working with SaT - dude1234 - 01-26-2018 Hi... with pokerstars.es starting I wanted to include it into my SaT but if I choose a different PokerStars Site like Classic it says "You can only include one PokerStars site into SaT....please remove your exisiting pokerstars site first...." What to do here to make .eu and .es working at the same time? Regards and thx RE: Pokerstars.es not working with SaT - SaT_Admin - 01-26-2018 http://www.stackandtile.com/sat/help/pokerstars Issue #3 If you play on multiple versions of Pokerstars such as .EU, .FR, .IT, you will need to make sure that you are using the same table theme inside each client. Then within SaT, make sure you only Include one PokerStars site which matches the correct table theme. RE: Pokerstars.es not working with SaT - dude1234 - 01-26-2018 thx, appreciate it RE: Pokerstars.es not working with SaT - SaT_Admin - 01-26-2018 Did it work? RE: Pokerstars.es not working with SaT - Guest - 02-24-2018 Pokerstars.es also not working for me. Everything the same like Pokerstars.eu. Went thourgh every setting step by step, its practically a clone. But there's an error Window popping up with a resizing issue. Hope you can help, thank you! RE: Pokerstars.es not working with SaT - Finn4uw - 02-24-2018 Ok, just posted before. Now reduced the Problem to .es tables not going back to stack, at least the resizing issue is gone. Solved that by deleting and re-adding site and configuring the .es table instead of .eu table. RE: Pokerstars.es not working with SaT - SaT_Admin - 02-25-2018 (02-24-2018, 08:04 PM)Finn4uw Wrote: Ok, just posted before. There should be no problems using .ES or .EU it should be the same. If the problem is now that the tables won't go back to the stack, then it seems SaT is not correctly detecting when action is required. Please see this help page for instructions and solutions: http://www.stackandtile.com/sat/help/tables-will-not-stay-stack-tables-pop-incorrectly Come back and let me know what worked or what didn't work |