Getting Unibet MTTs to work. - Printable Version +- StackAndTile Forums (https://www.stackandtile.com/forum) +-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1) +--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2) +--- Thread: Getting Unibet MTTs to work. (/showthread.php?tid=1867) Pages:
1
2
|
Getting Unibet MTTs to work. - beebeebee - 04-09-2018 So I understand that Unibet has been removed from the official list, but has any users gotten it to work permanently by adding it as one of their custom sites? I have tried a couple of times and I can get it to work after going through the setup, but as soon as I play my next session the table somehow isn't recognized and I have to do everything all over again. Any help or experiences would be much appreciated RE: Getting Unibet MTTs to work. - SaT_Admin - 04-09-2018 I might be able to help you. What "table_class" do you end up using in your custom site file? RE: Getting Unibet MTTs to work. - beebeebee - 04-09-2018 (04-09-2018, 03:47 AM)SaT_Admin Wrote: I might be able to help you. What "table_class" do you end up using in your custom site file? Hey Greg! I'm just trying to make a new right now and the table class is: {C5B73511-D074-4EE0-8EC0-C4092E65F977} RE: Getting Unibet MTTs to work. - SaT_Admin - 04-09-2018 (04-09-2018, 04:03 AM)beebeebee Wrote:(04-09-2018, 03:47 AM)SaT_Admin Wrote: I might be able to help you. What "table_class" do you end up using in your custom site file? Hrm yeah that is a problem. I'm guessing those numbers/letters change each time. Lets try this. Use the menu item for Help->Diagnostic-Get Window Title, and paste me the results for both the mian unibet lobby as well as a few tables that you plan on playing RE: Getting Unibet MTTs to work. - beebeebee - 04-09-2018 I can't get CRTL+SHIFT+ALT+T to work. It's supposed to copy the info so I can just copy/paste it right? Sorry for the confusion, first time trying to do the diagnostic. RE: Getting Unibet MTTs to work. - SaT_Admin - 04-09-2018 (04-09-2018, 10:23 PM)beebeebee Wrote: I can't get CRTL+SHIFT+ALT+T to work. It's supposed to copy the info so I can just copy/paste it right? Sorry for the confusion, first time trying to do the diagnostic. Yeah once you press that hotkey, you will get a popup showing the information. Are you seeing the popup? Are you getting any errors? And then it also automatically copies the same information to the clipboard, so you can simply CTRL+V to paste it. RE: Getting Unibet MTTs to work. - beebeebee - 04-10-2018 Sorry, I got that to work now HEre is the main lobby and a tournament as well (observing) title=[Unibet Poker v2.16.0],class=[{C08326B0-90A2-4A04-8A13-BD7825E34CD5}],pid=[11992] title=[€4,000 Deep Impact - Spectator],class=[{C08326B0-90A2-4A04-8A13-BD7825E34CD5}],pid=[11992] RE: Getting Unibet MTTs to work. - SaT_Admin - 04-10-2018 Try adding these lines to the bottom of your custom site file: Code: use_lobby_pid_for_tables=1 and then change these lines to these: Code: table_include_title_text=\ this will require the "\" blinds separator to be in the table title, so that observed table wouldn't be detected.. hopefully normal tables do display the "\" character RE: Getting Unibet MTTs to work. - beebeebee - 04-10-2018 I'm not quite sure what i'm supposed to change. Here is what my full file looks like now: [settings] standard_table_width=642 standard_table_height=391 buttons=fold,call,bet action_button=bet fold_button_x_coord=265 fold_button_y_coord=360 fold_button_region_topleft_x_coord=248 fold_button_region_topleft_y_coord=348 fold_button_region_bottomright_x_coord=248 fold_button_region_bottomright_y_coord=348 call_button_x_coord=298 call_button_y_coord=345 call_button_region_topleft_x_coord=317 call_button_region_topleft_y_coord=360 call_button_region_bottomright_x_coord=317 call_button_region_bottomright_y_coord=360 bet_button_x_coord=383 bet_button_y_coord=347 bet_button_region_topleft_x_coord=395 bet_button_region_topleft_y_coord=347 bet_button_region_bottomright_x_coord=395 bet_button_region_bottomright_y_coord=347 use_basic_click=0 table_class={AB5C3849-283D-407C-8D35-B94516547A2C} table_include_title_text=Ante table_exclude_title_text= use_lobby_pid_for_tables=1 lobby_title_text=^Unibet Poker lobby_class=\{[A-Z0-9]]{8}-[A-Z0-9]]{4}-[A-Z0-9]]{4}-[A-Z0-9]]{4}-[A-Z0-9]]{12}\} table_include_title_text=\ table_class=\{[A-Z0-9]]{8}-[A-Z0-9]]{4}-[A-Z0-9]]{4}-[A-Z0-9]]{4}-[A-Z0-9]]{12}\} Also I registered a cheap tournament just to get the table and it looks like this: title=[€1 - €50 Meteor Shower - 15/30 - Ante 4 (8268672)],class=[{5A7FEFD6-6898-46CC-BB4D-474F60198658}],pid=[69716] RE: Getting Unibet MTTs to work. - SaT_Admin - 04-10-2018 Right so at the bottom you have added these two lines, but they were already defined earlier in the file, so you can remove those initial lines a few lines above: Code: table_include_title_text= And sorry I made a mistake, for the table_include_title_text we need the blinds separator which is the backslash "/" not the forward slash "\". I also for some reason put double closing brackets ]] in the classnames which was also sloppy of me. Try this whole file: Code: [settings] You'll need to save the file, and close and reopen SaT |