+- StackAndTile Forums (https://www.stackandtile.com/forum)
+-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1)
+--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2)
+--- Thread: Bodog Help (/showthread.php?tid=2001)
Bodog Help - razios - 07-18-2019
Hey man,
I was setting up the Bodog stuff.
I have 2 monitors, one being 4k and the other normal 1920x1080.
I made that number 2 fix on windows 10 fix (selecting the application stuff), since I am using 150% scale.
What happened to me is that, when setting up the site, I get the table recognized, but it only folds when I am at the smaller definition monitor. Since I do my grind on the big resolution monitor, I wonder how can we fix that.
Thanks
RE: Bodog Help - SaT_Admin - 07-18-2019
Well you ALSO have to do #1, which is using custom scaling:
https://www.stackandtile.com/sat/help/windows-10-fix
However using custom scaling means that both screens will have to use the same scaling percentage. Are you already using 150% custom scaling?
RE: Bodog Help - Guest - 07-18-2019
Yes,
I have 150% on the big monitor, and 100% on the small one.
So, the "solution" would be have same scale for both monitors then ?
RE: Bodog Help - SaT_Admin - 07-18-2019
(07-18-2019, 06:19 AM)Guest Wrote: Yes,
I have 150% on the big monitor, and 100% on the small one.
So, the "solution" would be have same scale for both monitors then ?
That's exactly what the "custom scaling" in the #1 solution in the link is.
Its not a great solution, but its the only way it works.
RE: Bodog Help - Guest - 07-18-2019
Np man.
You are awesome with the support and all the program stuff.
Will check that out and see if I can those setting during my everyday use.