v2.99.04 scan mode changes - Printable Version +- StackAndTile Forums (https://www.stackandtile.com/forum) +-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1) +--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2) +--- Thread: v2.99.04 scan mode changes (/showthread.php?tid=2086) Pages:
1
2
|
v2.99.04 scan mode changes - SaT_Admin - 02-19-2020 If everything is working for you currently, then there is nothing to worry about, and you can safely ignore this change. The Scan Mode setting in SAT determines which programmatic method SAT will use to try to scan the button colors on your table, in order to determine whether they are visible and therefore whether or not is it your turn with action required. Previously, the Scan Mode chosen in Advanced Options would be in effect for all of your poker sites. In v2.99.04, the Scan Mode will now take effect only for all new sites that you try to Include. It is easiest to explain this with an example. WinningPoker requires "PW" scan mode in almost all cases (otherwise you might get the 'button detected as black' error). However, "PW" scan mode isn't the fastest, as so ideally you would want to use "DWM" scan mode if possible for most sites. In this new version 2.99.04, the solution will be to change to "PW" scan mode in Advanced Options, and THEN include the WinningPoker site into SAT. The "PW" scan mode will then be saved for WinningPoker. Then you can go back and change back to DWM scan mode afterwards, and all new sites will use DWM scan mode from now on. RE: v2.99.04 scan mode changes - Grozzorg - 02-26-2020 I implemented WPN with the scan mode "PW" and changed it back to "DWM" afterwards. Unfortunately the table moves to the grid whenever you have cards, even before it's time to act. I use v2.99.04 RE: v2.99.04 scan mode changes - SaT_Admin - 02-26-2020 (02-26-2020, 09:11 AM)Grozzorg Wrote: I implemented WPN with the scan mode "PW" and changed it back to "DWM" afterwards. Can you click File->Current Layout, and paste me everything? Also, how many monitors are you using? RE: v2.99.04 scan mode changes - Grozzorg - 02-27-2020 show_table_count_while_running=0 show_actionreq_count=0 show_session_timer=0 show_random_number=0 move_888_popups=1 close_bovada_popups=1 stars_include_logged_in_as=0 notify_new_tables=1 notify_old_tables=1 notify_keep_in_grid=1 notify_ignore_table=1 notify_move_to_grid=0 notify_end_of_hand=0 notification_duration=3 hotkeys_fire_on_release=0 allow_action_hotkeys_on_ignored_tables=1 click_bet_for_allin_hotkey=0 click_bet_for_betsize_hotkeys=0 click_bet_for_betxbb_hotkeys=0 click_bet_for_betpot_hotkeys=0 also_keep_in_grid_when_move_to_slot_x=0 fold_checkbox_setting=Fold also_stack_table_for_betsizeX=0 also_stack_table_for_allin=0 focus_betbox=0 detect_hidden_windows=0 auto_accept_stars_waitlists=0 click_stars_info_tab=0 [general] show_walkthru=0 gui_x=3108 gui_y=522 last_tab= filename=großerbildschirm1.ini is_reloading=0 version=2.99.04 win_ver=10.0.17763 v=fu v295_msg=0 v298_msg=0 v29805_msg=0 dpi=96 v29903_msg=0 [sites] number_of_sites=6 included_sites=PokerStarsBlack,Winamax,PartyPokerModern,888Poker,GGNetworkNew,WinningPoker_L PokerStarsBlack_included_executable_path=C:\Program Files (x86)\PokerStars.EU\PokerStars.exe PokerStarsBlack_included_resized_table_width=636 PokerStarsBlack_included_resized_table_height=466 PokerStarsBlack_included_fold_color=0x20274 PokerStarsBlack_included_call_color=0x20252 PokerStarsBlack_included_bet_color=0x10157 Winamax_included_executable_path=C:\Users\Leonard\Winamax\Winamax Poker\Winamax Poker.exe Winamax_included_resized_table_width=638 Winamax_included_resized_table_height=507 Winamax_included_fold_color=0x90669 Winamax_included_call_color=0x90669 Winamax_included_bet_color=0x90669 PartyPokerModern_included_executable_path=C:\Programs\PartyGaming\PartyGaming.exe PartyPokerModern_included_resized_table_width=638 PartyPokerModern_included_resized_table_height=467 PartyPokerModern_included_fold_color=0x3e3e3e PartyPokerModern_included_call_color=0xcb6615 PartyPokerModern_included_bet_color=0x1f6eeb 888Poker_included_executable_path=C:\Program Files (x86)\PacificPoker\bin\poker.exe 888Poker_included_resized_table_width=638 888Poker_included_resized_table_height=466 888Poker_included_fold_region_color=0x0 888Poker_included_fold_color=0x0 888Poker_included_call_color=0x0 888Poker_included_bet_color=0x0 GGNetworkNew_included_executable_path=C:\Users\Leonard\AppData\Roaming\GGPOKERSITE\GGnet.exe GGNetworkNew_included_resized_table_width=638 GGNetworkNew_included_resized_table_height=496 GGNetworkNew_included_fold_color=0x373baa GGNetworkNew_included_call_color=0x31349a GGNetworkNew_included_bet_color=0x31339b WinningPoker_L_included_executable_path=C:\AmericasCardroom\AmericasCardroom.exe WinningPoker_L_included_resized_table_width=638 WinningPoker_L_included_resized_table_height=466 WinningPoker_L_included_fold_color=0x1212d8 WinningPoker_L_included_call_color=0x7070e7 WinningPoker_L_included_bet_color=0xf0fbd WinningPoker_L_included_scanmode=PW [hotkeys] number_of_hotkeys=2 hotkey1action=Stack table hotkey1key=ü hotkey2action=Keep table in grid hotkey2key=ä send_table_under_mouse=1 I'm using two monitors, all the SaT layout is on the main monitor, while only the SaT and poker client lobbies are on the second one. RE: v2.99.04 scan mode changes - SaT_Admin - 02-27-2020 (02-27-2020, 02:51 AM)Grozzorg Wrote: I'm using two monitors, all the SaT layout is on the main monitor, while only the SaT and poker client lobbies are on the second one. I tested it with your table size, and it worked for me... During Include Site setup, are you sure you pressed F10 to fold when it was your turn to act? And not before, when the checkboxes were visible? Can you try setting Scan Mode to PW and try Removing and re-Including the site again? RE: v2.99.04 scan mode changes - Grozzorg - 02-28-2020 Did reinclude but same outcome. I used scan mode PW to include and changed back to DVM before testing, but even with PW the table comes out as soon as I get dealt cards. Did you use the Fold button as action button for WPN? Once you get dealt cards there are buttons in the same colour over the call and raise region. RE: v2.99.04 scan mode changes - SaT_Admin - 02-28-2020 (02-28-2020, 04:46 AM)Grozzorg Wrote: Did reinclude but same outcome.WPN requires PW scan mode in almost all cases, so you did it right. (02-28-2020, 04:46 AM)Grozzorg Wrote: Did you use the Fold button as action button for WPN? Once you get dealt cards there are buttons in the same colour over the call and raise region.We use all 3 buttons on WPN, and yes you are correct. But, for WPN, we do an extra lookup. If we find the fold or call button (which as you note is the same for the advance action checkboxes), we also look for the existence of the "Call Any" checkbox, which is located above in a different region. If we see that button, then SAT will mark the table as NOT requiring action. So perhaps that is failing on your machine. Before we look into that, you say you have 2 monitors.. Are the monitors the same size and scaling %? If not, can you try doing #2 on this page, and then re-Including the site with PW scan mode?: https://www.stackandtile.com/sat/help/windows-10-fix RE: v2.99.04 scan mode changes - Grozzorg - 02-28-2020 I have 2 different monitors effecting size and scaling, but the tables are only on one screen the whole time(stack and grid), should I try it anyway? RE: v2.99.04 scan mode changes - Grozzorg - 02-28-2020 *I'm just asking, because these adjustments seem to influence the whole setup and I don't want to fuck things up RE: v2.99.04 scan mode changes - SaT_Admin - 02-28-2020 (02-28-2020, 09:58 AM)Grozzorg Wrote: I have 2 different monitors effecting size and scaling, but the tables are only on one screen the whole time(stack and grid), should I try it anyway?Well as long as the grid slots are on the PRIMARY monitor, then I guess you should be good. If they are on the secondary, then you might run into problems. (02-28-2020, 10:08 AM)Grozzorg Wrote: *I'm just asking, because these adjustments seem to influence the whole setup and I don't want to fuck things upUsing the Custom Scaling in Windows will influence how your monitors look and the sizing of items. It will force all screens to use the same scaling %. Its necessary in some instances. For you it may not be. If you want to avoid it, you can also do this for me and I can investigate further: click File->Current Layout, add this line under [settings]: Code: [settings] C:\Program Files (x86)\StackAndTile\ and send me the "logg.txt" file to support (at) stackandtile (dot) com. Also, use the SAT menu item for Help->Diagnostic->Take Screenshot with PW, and take 2 screenshots, one when it is your turn to act with the real fold/call/bet buttons, and another when the advance action checkboxes are available. Attach those 2 screenshots to the email as well. |