ACR don't work - Printable Version +- StackAndTile Forums (https://www.stackandtile.com/forum) +-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1) +--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2) +--- Thread: ACR don't work (/showthread.php?tid=2096) |
ACR don't work - Condor12 - 03-14-2020 Hello, When I try to configure ACR in the software I get the following error, I have tried everything and I cannot solve it. Thank you <a href="https://imgbb.com/"><img src="https://i.ibb.co/JzZzjfJ/1.png" alt="1" border="0"></a> RE: ACR don't work - SaT_Admin - 03-14-2020 When Including the site, before you press F9, click the "..." text label, and make sure the Scan Mode = PW RE: ACR don't work - Condor12 - 03-14-2020 what is the click the "..." text label? I changed the scan mode but still dont work. RE: ACR don't work - SaT_Admin - 03-14-2020 (03-14-2020, 05:22 AM)Condor12 Wrote: what is the click the "..." text label? See here: https://imgur.com/YqiCvy7 When you click that "...", you will see the Scan Mode dropdown. Make sure it is PW, and then Include the site RE: ACR don't work - Condor12 - 03-16-2020 wow it works now! ty RE: ACR don't work - P_Rozay - 04-02-2020 https://gyazo.com/ccd728d69c1cbd7d1bf3912e0bc1c1ab Getting this message now changed to PW in scan mode still nothing RE: ACR don't work - P_Rozay - 04-02-2020 Keep getting this messaged, changed scan mode to PW. Still nothing. RE: ACR don't work - SaT_Admin - 04-02-2020 It looks like ACR put out another update, can you try updating again and seeing if SAT works now? RE: ACR don't work - Guest - 04-03-2020 I've had issues with the Cycling being quite slow, is there some sort of setting I can change to fix this issue? If I just turn off Stack and tile and turn auto cycling in the client it cycles to the next table instantly and there is a second or 2 delay when using stack and tile. RE: ACR don't work - SaT_Admin - 04-03-2020 (04-03-2020, 07:18 AM)Guest Wrote: I've had issues with the Cycling being quite slow, is there some sort of setting I can change to fix this issue? If I just turn off Stack and tile and turn auto cycling in the client it cycles to the next table instantly and there is a second or 2 delay when using stack and tile. Can you click File->Current Layout, and paste me everything? |