Chico and Ignition STAY IN STACK when 2 options!! - Printable Version +- StackAndTile Forums (https://www.stackandtile.com/forum) +-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1) +--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2) +--- Thread: Chico and Ignition STAY IN STACK when 2 options!! (/showthread.php?tid=2167) |
Chico and Ignition STAY IN STACK when 2 options!! - SAT biggest fan - 07-13-2020 Hi, Whenever I have a decision on Chico or IG that is call or fold, the table doesnt come to the grid! Obviously a huge problem when 10 tabling. My guess based on the obvious is SAT doesnt see 3 buttons so it doesnt send us the table? However WPN never has this issue. Theres no way im the first to have this issue - but i couldnt find any previous threads on it Any fix? Kind of a big deal considering how often we end up timing out. Thanks, B RE: Chico and Ignition STAY IN STACK when 2 options!! - SaT_Admin - 07-14-2020 For the "Chico" site, the action button is the Call button. So as long as the 2nd/middle button is visible on the table, the table should move to the grid. Similarly, for the "BodogIgnition" site, the action button is the Fold button. So in both cases you describe, the program *should* be working properly. I suggest you run the Test on this page to confirm if you are seeing the problem or not: https://www.stackandtile.com/sat/help/tables-will-not-stay-stack-tables-pop-incorrectly If so, the first thing to try is to Remove and re-Include the site. Let me know what you find RE: Chico and Ignition STAY IN STACK when 2 options!! - bbbb - 07-14-2020 so actually, when it's call or fold, there's no middle button. Fold goes far left and call goes far right. RE: Chico and Ignition STAY IN STACK when 2 options!! - SaT_Admin - 07-14-2020 (07-14-2020, 09:36 AM)bbbb Wrote: so actually, when it's call or fold, there's no middle button. Fold goes far left and call goes far right. Is that for Chico? When I was testing, I saw this image, where you can see when facing an all-in, the 1st and 2nd buttons were visible: https://imgur.com/a/I056a4T Can you show me a screenshot? If so, I can update SAT And also as said with Bodog, it should be working, since SAT looks for the Fold button. Are you certain its failing on Bodog? RE: Chico and Ignition STAY IN STACK when 2 options!! - Guest - 07-23-2020 it must be reading the raise button. i removed and re included Chico, and when it's call or fold, the table doesnt pop into the grid RE: Chico and Ignition STAY IN STACK when 2 options!! - SaT_Admin - 07-24-2020 (07-23-2020, 08:10 PM)Guest Wrote: it must be reading the raise button. i removed and re included Chico, and when it's call or fold, the table doesnt pop into the grid For Chico, SAT uses the middle button to determine if action is required. The middle button is usually the Call button. Can you take a screenshot of the table when it fails? That way we can see what buttons are visible RE: Chico and Ignition STAY IN STACK when 2 options!! - Guest - 07-24-2020 here you go. every time, without fail, table stays in stack. Love SAT hope to fig this out RE: Chico and Ignition STAY IN STACK when 2 options!! - Guest - 07-24-2020 (07-24-2020, 05:44 PM)Guest Wrote: here you go. every time, without fail, table stays in stack. Love SAT hope to fig this out https://gyazo.com/b59fa6ee2ab0277bfc6adef4754e226c RE: Chico and Ignition STAY IN STACK when 2 options!! - SaT_Admin - 07-25-2020 Ok please download and install this version 2.99.07zf http://www.stackandtile.com/sat/tmp/StackAndTile_Setup-29907zf.exe Then Remove and re-Include the "Chico" site and test it and see if it works |