Party Poker does not work - Printable Version +- StackAndTile Forums (https://www.stackandtile.com/forum) +-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1) +--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2) +--- Thread: Party Poker does not work (/showthread.php?tid=2250) |
Party Poker does not work - Selvister - 10-23-2020 Hello I already added GG Poker and Poker Stars to the software Unfortunately I am not able to add Party Poker. Both options Modern and Classic do not work I configured Party Poker as mentioned on your homepage Message is: "Failure. This table Fast forward.... doesn't match for PartyPokerModern I am using version 2.99.10 Can you please help me ? Thank you in advance BR Selvister RE: Party Poker does not work - SaT_Admin - 10-23-2020 Please use the menu item for Help->Diagnostic->Get Window Title, and paste me the result for your main party lobby RE: Party Poker does not work - Selvister - 10-23-2020 title=[partypoker.de: Poker Lobby - Good luck kotter1711 ],class=[#32770],pid=[21056] RE: Party Poker does not work - SaT_Admin - 10-23-2020 ahhh the new party.de client please try this version v2.99.10zg, it should work: https://www.stackandtile.com/sat/tmp/StackAndTile_Setup-29910zg.exe RE: Party Poker does not work - Selvister - 10-23-2020 (10-23-2020, 09:25 AM)SaT_Admin Wrote: ahhh the new party.de client That worked! Thank you How long is my test period? Can I test until Sunday? BR Marc RE: Party Poker does not work - SaT_Admin - 10-23-2020 I dont know.. click on the About tab, Register button, and paste me your Machine ID RE: Party Poker does not work - Guest - 10-23-2020 (10-23-2020, 09:29 AM)SaT_Admin Wrote: I dont know.. click on the About tab, Register button, and paste me your Machine ID Machine ID = 9C305DD7771CA81F RE: Party Poker does not work - Selvister - 10-23-2020 Feature request: Is Stack and Tile able to adjust the grid depending on the number of active tables? For example: If I play 8 tables simultaneously, I want to have 4 tables on monitor#1 and 4 tables on monitor#2 If I play 10 tables simultaneously, I want to have 5 tables on monitor#1 and 5 tables on monitor#2. The size of the tables should be adjustable accordingly to the numbers of active tables If I play 10 tables simultaneously, I want to have 6 tables on monitor#1 and 6 tables on monitor#2. The size of the tables should be adjustable accordingly to the numbers active tables The software recognizes automatically, when the number of tables changes and it applies the correct grid accordingly If Stack and Tile is not able to do that at the moment, could this be an idea for a future update? If yes, when could you provide that? Best regards Marc RE: Party Poker does not work - SaT_Admin - 10-23-2020 (10-23-2020, 09:52 PM)Guest Wrote:Your trial period is active until November 6th(10-23-2020, 09:29 AM)SaT_Admin Wrote: I dont know.. click on the About tab, Register button, and paste me your Machine ID (10-23-2020, 09:58 PM)Selvister Wrote: Feature request:SaT cannot currently do that. Its a bigger change, so it would take some time to implement. And I'd need to figure out how to display the options to the user in a logical way. One question I have is, you've listed 3 scenarios: 1. less than 8 tables 2. 8-10 tables 3. 10-12 tables but what if someone wants to configure 5 scenarios, or 10, it gets difficult Can you leave your email address, and I can email you if/when I ever build this? I will revisit it and see how long it might take RE: Party Poker does not work - Selvister - 10-23-2020 (10-23-2020, 10:33 PM)SaT_Admin Wrote:(10-23-2020, 09:52 PM)Guest Wrote:Your trial period is active until November 6th(10-23-2020, 09:29 AM)SaT_Admin Wrote: I dont know.. click on the About tab, Register button, and paste me your Machine ID Sure I would like to give you my mail address but I do not want to post it here. How can I send it to you? Thank you for the test period until November. But right now it seems to be a great tool which I probably gonna use. Test phase starts tonight. Yes, the user should be able to create as many scenarios as possible and the software recognizes which scenario needs to be applied. So I guess the user needs several layout.ini files with different settings (width / height of the tables) But it's great to hear that you are thinking about that feature. BR Marc |