+- StackAndTile Forums (https://www.stackandtile.com/forum)
+-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1)
+--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2)
+--- Thread: Betclic cannot be added (/showthread.php?tid=2416)
Betclic cannot be added - DaradBur - 12-18-2021
Hello,
When adding iPokerNew for Betclic.fr, pressing F9 leads to SaT to say the table is not an iPokerNew one.
I've seen betclic is supposed to be supported by the iPokerNew choice.
Let me know how I can help to debug that.
RE: Betclic cannot be added - DaradBur - 12-19-2021
Tried again on a freeroll table, I get the following message:
ERROR. Table detection did not work. Window does not match the table classname or the lobby process.
You can Cancel this and try again, making sure that you actually CLICK on the table to give it focus, before pressing F9.
Detected window: [FR] Shasta 675086899 | NL
I did do that.
Here's the diagnostic for main lobby:
title=[[FR] Shasta],class=[Qt5155QWindowOwnDCIcon],pid=[40568]
And for the table itself:
title=[[FR] Shasta 675086899 | NL Hold'em | Level 1 | 15/30 v.21.9.2.9],class=[Qt5155QWindowOwnDCIcon],pid=[40568]
RE: Betclic cannot be added - DaradBur - 12-20-2021
I've added it as a custom site, everything works fine (I just cannot prefold for some reason)
The main lobby title was Betclic.fr this time
RE: Betclic cannot be added - SaT_Admin - 12-24-2021
You can try this version 2.99.16a:
https://www.stackandtile.com/sat/tmp/StackAndTile_Setup-29916a.exe
RE: Betclic cannot be added - DaradBur - 02-28-2022
Hi! It's been a long time, I've just tried the version 2.99.16a and I could add Betclic.fr without any issues!