StackAndTile Forums
888 Update - Printable Version

+- StackAndTile Forums (https://www.stackandtile.com/forum)
+-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1)
+--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2)
+--- Thread: 888 Update (/showthread.php?tid=2556)

Pages: 1 2 3 4


888 Update - Guest - 02-25-2024

Maybe any updates for the new 888 Layout? thanks


RE: 888 Update - SaT_Admin - 02-25-2024

Please try this version 2.99.21q-highDPI

https://www.stackandtile.com/sat/tmp/StackAndTile_Setup-29921q-highDPI.exe

find new site "888PokerNew2"

let me know if it works


RE: 888 Update - Doomed - 02-26-2024

Is there a possibilty to get the update for the non high DPI version?


RE: 888 Update - Guest - 02-26-2024

With that highDPI it works fine for me. What´s the differene between the normal and the HighDPI Version?


RE: 888 Update - Guest - 02-26-2024

Ok with that new HighDPI Version GGPoker doesn´t work anymore.


RE: 888 Update - SaT_Admin - 02-26-2024

(02-26-2024, 01:32 AM)Doomed Wrote: Is there a possibilty to get the update for the non high DPI version?
here you go:
https://www.stackandtile.com/sat/tmp/StackAndTile_Setup-29921q.exe

(02-26-2024, 01:37 AM)Guest Wrote: With that highDPI it works fine for me. What´s the differene between the normal and the HighDPI Version?
it will eventually become version 3.0
you can see some of the changes on the downloads page

(02-26-2024, 01:55 AM)Guest Wrote: Ok with that new HighDPI Version GGPoker doesn´t work anymore.
can you tell me what exactly didnt work? were tables not detected at all and not put in grid? or SAT was not detecting action required correctly? or specific hotkeys werent working?


RE: 888 Update - Doomed - 02-26-2024

with that version https://www.stackandtile.com/sat/tmp/Sta...29921m.exe I have still problems and other tables dont get into grid anymore


RE: 888 Update - SaT_Admin - 02-26-2024

(02-26-2024, 08:00 AM)Doomed Wrote: with that version https://www.stackandtile.com/sat/tmp/Sta...29921m.exe I have still problems and other tables dont get into grid anymore

Don't go into grid how? Don't pop out of the stack when action is required? Or don't get added to SAT's grid layout altogether? What tables? What site? etc


RE: 888 Update - Doomed - 02-26-2024

Sorry, I meant stack and tile function doesnt work over all sites. and 888 has the same issues.


RE: 888 Update - SaT_Admin - 02-26-2024

(02-26-2024, 10:30 AM)Doomed Wrote: Sorry, I meant stack and tile function doesnt work over all sites. and 888 has the same issues.

So the tables stay in the stack and don't pop out into the grid when action is required?
When you use Help->Show Testing Info, does the "ACTION REQUIRED" line not change when its your turn to act?

If you revert to an older version (which?), does everything work as expected?