StackAndTile Forums
party poker dissapearing buttons - Printable Version

+- StackAndTile Forums (https://www.stackandtile.com/forum)
+-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1)
+--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2)
+--- Thread: party poker dissapearing buttons (/showthread.php?tid=301)

Pages: 1 2


party poker dissapearing buttons - pavopavu - 08-31-2012

when i now use version 2.1 partypoker buttons dissapear. this didnt happen with old version. i use party modern and have tried to configure it already 3 times with same problem. please help!

thanks.


RE: party poker dissapearing buttons - SaT_Admin - 08-31-2012

What Scan Mode are you using (Advanced Options)? Do you remember which you were using previously?


RE: party poker dissapearing buttons - pavopavu - 09-01-2012

I am using scan mode PW. I didnt make any changes since the update so I think its the same.


RE: party poker dissapearing buttons - zenzor - 09-01-2012

Just got back to using S&T today after a break from poker. Downloaded the new version and its completely messed up everything on Party. The action buttons disappear every hand and the table is constantly flickering. Made a video:

http://youtu.be/7HK9oeLB56c






RE: party poker dissapearing buttons - SaT_Admin - 09-02-2012

zenzor, I'm gonna guess that you are using Scan Mode = "PW" too?

This is a long standing issue
http://www.stackandtile.com/sat/help/partypoker

I don't think anything was changed in v2.1.0 that should have affected this. Probably in previous versions, you guys were using a different Scan Mode. Its always best to use Scan Mode = 'DWM' if you can, however if the software didn't choose that by default, then its probably because you are using Win XP, and you should try using Scan Mode = BB. If you are using Win Vista or 7 but SaT did NOT automatically choose DWM, then you need to enable Aero theme. See the Scan Mode section on this page:
http://www.stackandtile.com/sat/help/advanced-options


RE: party poker dissapearing buttons - zenzor - 09-04-2012

Ok, thanks. I'm using XP and switching to the scan mode to BB fixed the problem flickering issue.

I'm having another problem now though. When I select a seat at a table, S&T resizes buy-in window as if its a table and places it in a new slot. Here's a video:

http://youtu.be/kKaygTXdYmk


This problem makes playing with S&T impossible so your help is much appreciate again. Here's my config in case it helps.

Quote:[settings]
table_width=732
table_height=533
total_slots=13
slot1x=4027
slot1y=6
slot2x=1826
slot2y=-1
slot3x=1096
slot3y=0
slot4x=1823
slot4y=1060
slot5x=1089
slot5y=1059
slot6x=355
slot6y=1060
slot7x=361
slot7y=527
slot8x=2560
slot8y=-1
slot9x=2561
slot9y=530
slot10x=2561
slot10y=1059
slot11x=3293
slot11y=530
slot12x=3292
slot12y=-2
stack_slot=1
newtables_slot=grid
move_on_street=never
oldtables_duration=5
oldtables_slot=grid
scan_mode=BB
slot13x=3293
slot13y=1066
activate_on_move=1
left_click_detection=1
stack_table_at_end_of_hand=1
check_holecard_for_end_of_hand=0
bring_urgent_tables_to_top=1
minimize_to_tray=0
show_table_count_while_running=0
notify_new_tables=1
notify_old_tables=1
notify_keep_in_grid=1
notify_ignore_table=1
notify_action_required=0
notify_end_of_hand=0
notification_duration=3
[general]
gui_x=337
gui_y=778
last_tab=Settings
show_walkthru=0
[sites]
number_of_sites=2
included_sites=PartyPokerModern,betfair
ongamemodded1_included_executable_path=C:\Goalwin\Goalwin.exe
ongamemodded1_included_resized_table_width=732
ongamemodded1_included_resized_table_height=533
PartyPokerModern_included_hole_x_coord=315
PartyPokerModern_included_hole_y_coord=335
PartyPokerModern_included_table_color_behind_holecard=0x2e2c2b
PartyPokerModern_included_flop_x_coord=302
PartyPokerModern_included_flop_y_coord=207
PartyPokerModern_included_table_color_behind_flop=0x9a9897
betfair_included_hole_x_coord=349
betfair_included_hole_y_coord=343
betfair_included_table_color_behind_holecard=0xa2509
betfair_included_flop_x_coord=309
betfair_included_flop_y_coord=230
betfair_included_table_color_behind_flop=0xf3608
PartyPokerModern_included_executable_path=C:\Program Files\PartyGaming\PartyGaming.exe
PartyPokerModern_included_resized_table_width=732
PartyPokerModern_included_resized_table_height=520
PartyPokerModern_included_fold_color=0x58548d
PartyPokerModern_included_call_color=0x8a7141
PartyPokerModern_included_bet_color=0x567562
betfair_included_executable_path=C:\Betfair\Betfair.exe
betfair_included_resized_table_width=732
betfair_included_resized_table_height=533
betfair_included_fold_color=0x2a552f
betfair_included_call_color=0x1c4021
betfair_included_bet_color=0x1c4021
[hotkeys]
number_of_hotkeys=5
hotkey1action=Keep table in grid
hotkey1key=`
hotkey2action=Ignore table
hotkey2key=F4
hotkey3action=Stack table
hotkey3key=F1
hotkey4action=Move table to Next slot
hotkey4key=F5
hotkey5action=Move table to Previous slot
hotkey5key=F6



RE: party poker dissapearing buttons - SaT_Admin - 09-05-2012

(09-04-2012, 03:08 PM)zenzor Wrote: Ok, thanks. I'm using XP and switching to the scan mode to BB fixed the problem flickering issue.

Good to hear

Quote:I'm having another problem now though. When I select a seat at a table, S&T resizes buy-in window as if its a table and places it in a new slot. Here's a video:

http://youtu.be/kKaygTXdYmk

This problem makes playing with S&T impossible so your help is much appreciate again. Here's my config in case it helps.

Ahhh I see. Sorry about that. The problem is because I'm using the string "Buy-in" to detect Party tournament tables. That is conflicting with the cash game buyin popup since it has the same string. I will fix it in the next version.

For now, you can grab this file, drop it in the C:\Program Files\StackAndTile\Sites directory and re-start SaT, you will find it at the bottom of the sites drop down list. Remove your current party settings and then just Include these.

PartyModernNoBuyIn.ini



RE: party poker dissapearing buttons - zenzor - 10-09-2012

I'm now having the same cash game buyin popup issue on 888. I'm using a custom configuration since I'm playing on a different skin and using a custom mod.


RE: party poker dissapearing buttons - zenzor - 10-09-2012

fwiw the skin is luckyacepoker, here is the config:

----

[settings]

standard_table_width=810
standard_table_height=584

buttons=fold,call,bet

action_button=fold

fold_button_x_coord=379
fold_button_y_coord=485
fold_button_region_topleft_x_coord=335
fold_button_region_topleft_y_coord=471
fold_button_region_bottomright_x_coord=480
fold_button_region_bottomright_y_coord=496

call_button_x_coord=534
call_button_y_coord=482
call_button_region_topleft_x_coord=493
call_button_region_topleft_y_coord=471
call_button_region_bottomright_x_coord=636
call_button_region_bottomright_y_coord=496

bet_button_x_coord=688
bet_button_y_coord=483
bet_button_region_topleft_x_coord=649
bet_button_region_topleft_y_coord=471
bet_button_region_bottomright_x_coord=789
bet_button_region_bottomright_y_coord=494

use_basic_click=0

table_class=#32770

table_include_title_text=
table_exclude_title_text=Lobby


RE: party poker dissapearing buttons - SaT_Admin - 10-10-2012

change this line to look like this:

Code:
table_include_title_text=\/