Only tile - Printable Version +- StackAndTile Forums (https://www.stackandtile.com/forum) +-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1) +--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2) +--- Thread: Only tile (/showthread.php?tid=302) |
Only tile - Guest - 08-31-2012 Hi. Let me say sorry first, for not creating an account on your forum. I hope you don't mind. StackAndTile really looks like a great program and also works like a charm. BUT, to be honest, I don't actually need "stacking" part And here's my question... Let say I have 5 tables opened. 2 from PokerStars, 2 from PartyPoker and 1 from Ongame. Is it possible to "only Tile" these tables with SaT? I tried playing around with your program, but couldn't find solution myself. Thank you for your answer. Regards, CoreySteel RE: Only tile - SaT_Admin - 08-31-2012 (08-31-2012, 10:23 AM)Guest Wrote: Hi. Sure Just set 'New Tables' = Grid, that way all tables that you open up will start off Tiled. However, the stack slot will stay empty until you specifically send one table there. So either set up a "Stack Table" hotkey or a "Tile All Tables" hotkey, either should solve it. Use 'Tile Setting' = Never that way SaT will not be moving tables back and forth. Also turn off 'Stack tables at End of Hand' and 'Left Click Detection' in Advanced Options I should probably put these instructions somewhere on the site. Or maybe make a "Tile Only" mode for SaT |