Stacked tables keep stealing focus - Printable Version +- StackAndTile Forums (https://www.stackandtile.com/forum) +-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1) +--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2) +--- Thread: Stacked tables keep stealing focus (/showthread.php?tid=499) |
RE: Stacked tables keep stealing focus - SvZff - 03-15-2013 In the meantime I might try to play Stack&Tiles tonight to see how that goes and to avoid too much misclicks. I have a feeling with all the bugs we took out now/ me getting to know the program that Stack&Tiles mode will run quite fluently. Thanks again for your time, really appreciate your efforts. RE: Stacked tables keep stealing focus - SaT_Admin - 03-16-2013 (03-15-2013, 10:42 PM)SvZff Wrote: Custom Party In both of these, this line is incorrect: Code: action_button='fold' There should be no quote marks around the button: Code: action_button=fold (03-15-2013, 10:43 PM)SvZff Wrote: Custom Winamax You have two lines of [settings] , please remove the one at the bottom Please try those two changes for now RE: Stacked tables keep stealing focus - SvZff - 03-16-2013 Ok made those changes. Do i have to remove and re-add the custom sites within SAT or is rebooting SAT good enough? Will test tonight! RE: Stacked tables keep stealing focus - SaT_Admin - 03-16-2013 Yeah just closing and reopening SaT will be good enough. You only need to remove/re-include a site if the button coordinates change (and therefore the color at that coordinate would change) RE: Stacked tables keep stealing focus - SvZff - 03-16-2013 ok, things are getting interesting now... I was playing 10+ tables, everything seemed fine... unitl i opened 2 winamax tables! (custom) yesterdays problem was back, pretty much exactly the same. To test, i shut down Winamax completely, and the problem seemed gone again! It did come back after i reopened Winamax (i had 2 tables open so i pretty much had to haha). To test i did these things: - I tried to put the winamax tables on 'ignore' and out of my stack, seemed to improve but not fully solve the problem Then i removed my custom winamax profile from SAT and rebooted SAT and then what happened suprised me... - My Winamax table (had 1 left) was still recognized by SAT - My 888 table was not recognized anymore!! And it was not on 'ignore' This must have been what happened to my 888 table yesterday! Seems to be some serious mixing up going on? RE: Stacked tables keep stealing focus - SvZff - 03-16-2013 All winamax and 888 tables busted now ---> problem is gone! RE: Stacked tables keep stealing focus - SaT_Admin - 03-16-2013 I don't notice anything strange from your custom Winamax config that would cause problems, other than the quotes around the 'fold'. You removed those right? You said that the problem happened only when the Winamax tables were running... but which tables were stealing focus? Were all different tables coming to the top? Or only Winamax was stealing focus? RE: Stacked tables keep stealing focus - SvZff - 03-16-2013 Ok you are right, it's not on winamax, it just happended a couple more times. Ipoker just stole focus from ongame, and i think something went wrong where i misclicked on party too RE: Stacked tables keep stealing focus - SvZff - 03-16-2013 yeah the ' ' around fold are gone. Damn i thought we had it there for a minute RE: Stacked tables keep stealing focus - SvZff - 03-16-2013 With Winamax 2 tables open, there was a lot going on, basically a lot of tables stealing from another lot, i couldn't see any system in it |