888 tables fail to move into grid... - Printable Version +- StackAndTile Forums (https://www.stackandtile.com/forum) +-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1) +--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2) +--- Thread: 888 tables fail to move into grid... (/showthread.php?tid=624) |
RE: 888 tables fail to move into grid... - MarcyArgy - 12-05-2013 this does not work. Tables will sit out again as this stands. I overcame the rebuy issue by clicking rebuy and then immediately hitting the enter button before SaT had the chance to close the message. This worked fine. Now the old problem has returned. Can you please consider reinstating this function as the new solution is not solving the problem. RE: 888 tables fail to move into grid... - SaT_Admin - 12-06-2013 How/why do you get sat out? This new way, you still have to click the popup. Does the table move into the grid correctly? Or do you find that the table is stuck at the bottom of the stack and sitting out? As for the rebuy issue, what if you are not fast enough? Or if the popup is lost in the bottom of the stack? RE: 888 tables fail to move into grid... - felix - 12-12-2013 ya my 888 tables dont seem to pop into the grid when faced with fold or allin either now that I installed version 4.5.2 , oh and sometimes my hypersimple stars tables dont pop into grid with the new version. So ive downgraded to previous version again with the brown pre-flop checkboxes RE: 888 tables fail to move into grid... - felix - 12-12-2013 [settings] table_width=640 table_height=468 total_slots=8 stack_slot=1 newtables_slot=grid move_on_street=preflop oldtables_duration=3 oldtables_slot=grid scan_mode=DWM move_to_grid=preflop play_mode=SaT activate_most_urgent=1 activate_table_under_mouse=0 highlight_active_win=0 move_mouse_to_most_urgent=0 left_click_detection=1 stack_table_at_end_of_hand=0 check_holecard_for_end_of_hand=0 drag_drop_swap_slots=1 minimize_to_tray=0 show_table_count_while_running=1 show_session_timer=0 notify_new_tables=1 notify_old_tables=1 notify_keep_in_grid=1 notify_ignore_table=1 notify_action_required=0 notify_end_of_hand=0 notification_duration=3 hotkeys_fire_on_release=0 allow_action_hotkeys_on_ignored_tables=0 click_bet_for_betsize_hotkeys=0 table_count_gui_x=1264 table_count_gui_y=937 slot1x=1279 slot1y=0 slot2x=1920 slot2y=119 slot3x=1920 slot3y=587 slot4x=2560 slot4y=587 slot5x=2560 slot5y=119 slot6x=3200 slot6y=118 slot7x=3200 slot7y=587 slot8x=1280 slot8y=470 move_888_popups=1 notify_move_to_grid=0 [general] show_walkthru=0 gui_x=732 gui_y=293 last_tab= is_reloading=0 version=2.52 v=fu RE: 888 tables fail to move into grid... - SaT_Admin - 12-12-2013 (12-12-2013, 03:13 AM)felix Wrote: ya my 888 tables dont seem to pop into the grid when faced with fold or allin either now that I installed version 4.5.2 , Do you mean version 2.52? So it only failed when it was fold/allin? Do the 888 tables move into the grid when there was the normal fold/call/bet ? Quote:oh and sometimes my hypersimple stars tables dont pop into grid with the new version. So ive downgraded to previous version again with the brown pre-flop checkboxes So the hypersimple tables just stay in the stack and never come out? Did you try removing and re-including the site? RE: 888 tables fail to move into grid... - felix - 12-14-2013 (12-12-2013, 01:41 PM)SaT_Admin Wrote: Do you mean version 2.52?Yes. And I installed the grinders.org 888 mod to see if the problem would go away, but after I installed it it got even worse and I dont think it popped up for fold/call/bet. Quote:So the hypersimple tables just stay in the stack and never come out? Did you try removing and re-including the site?no, most of the tables worked fine but some would just never go into the grid.. at first it only happened to some of my 180man sng tables, but then i had the same problem for some of my mtts. really random for some reason. RE: 888 tables fail to move into grid... - SaT_Admin - 12-14-2013 And when you downgrade to version 2.4.11, everything works ok as expected? Its strange because the problem that most people are reporting with 2.5+ is that SaT ALWAYS thinks that tables require action and keeps putting them in the grid and will not allow them to stay in the stack. Your problem seems to be the reverse.. RE: 888 tables fail to move into grid... - felix - 12-14-2013 yes with the prev version (and the little 'cheat' with the different brown pre-click boxes for hypersimple theme) everything works close to perfect. RE: 888 tables fail to move into grid... - Guest - 12-14-2013 (12-14-2013, 05:45 PM)SaT_Admin Wrote: And when you downgrade to version 2.4.11, everything works ok as expected? isnt this the same problem that the hypersimple theme had in the previous version without the pre-click box 'cheat'? RE: 888 tables fail to move into grid... - SaT_Admin - 12-15-2013 (12-14-2013, 05:56 PM)Guest Wrote:(12-14-2013, 05:45 PM)SaT_Admin Wrote: And when you downgrade to version 2.4.11, everything works ok as expected? No The HyperSimple problem was that tables would move into grid TOO SOON. They would move as soon as the pre-action checkbox was visible. You are saying that the 888 table will not move at all when your action is fold/allin. Unless I'm misunderstanding you.. |