+- StackAndTile Forums (https://www.stackandtile.com/forum)
+-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1)
+--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2)
+--- Thread: gala ipoker (/showthread.php?tid=745)
gala ipoker - mrx12222@gmail.com - 02-18-2014
i cant get gala to work at all when u fold it dosnt move and it tiles before its even u to act help plz
RE: gala ipoker - SaT_Admin - 02-18-2014
Please see the iPoker help page:
http://www.stackandtile.com/sat/help/ipoker
Make sure you have it set up correctly. Specifically make sure your chat box is full size. Remove and re-Include the site into SaT.
RE: gala ipoker - mrx12222@gmail.com - 02-18-2014
i have tryed everything chat sizes etc
RE: gala ipoker - Guest - 02-18-2014
it pops forward as soon as i have cards not when i have to act and when i fold it dosnt move back the chatbox is correct aswel
RE: gala ipoker - SaT_Admin - 02-18-2014
Ahhhh. The problem is probably the #4 issue listed on the iPoker help page. For more information, see this page:
http://www.stackandtile.com/sat/help/tables-moving-grid-wrong-time
Likely for this Gala skin the color for the pre-action fold checkbox is the same color as the actual Fold button itself. See the TruePoker and PokerStarsHyperSimple images on the above link and compare to the PokerStarsBlack at the bottom.
In this case, SaT sees the pre-action fold checkbox which is shown as soon as you are dealt cards, and because its the same color SaT thinks this is the actual Fold button. Only solution is to mod the table graphics to make the checkbox and fold button different colors. Or to use a different skin
RE: gala ipoker - Guest - 02-18-2014
ok how would i do that change the colour ?
RE: gala ipoker - SaT_Admin - 02-19-2014
I don't know exactly. Your best solution would be to use a 'table mod' such as the one linked to in the #4 issue on the iPoker help page I linked above. You may need to talk to them about assisting you set it up. Visit the link shown in #4, I believe there are instructions on that website.