Tables randomly change grid positions - Printable Version +- StackAndTile Forums (https://www.stackandtile.com/forum) +-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1) +--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2) +--- Thread: Tables randomly change grid positions (/showthread.php?tid=810) |
Tables randomly change grid positions - Guest - 05-25-2014 Hello! First off: Stack and Tile used to work perfectly fine before and I didn't change any settings in the meantime. When I'm at the bubble or ITM I usually keep tables in the grid with the according hotkey. Whenever im using a vpip hotkey however, the tables in the grid will randomly swap positions, which is very confusing. Its weird, because they are supposed to be locked on their current position. What could be the cause of this issue? RE: Tables randomly change grid positions - SaT_Admin - 05-25-2014 I don't know. I just did a quick test and didn't see the problem. Can you tell me exactly how to reproduce it? What setting are you using for Move To Grid? Are you using a Call/Bet hotkey or an External VPIP hotkey? Are you using the hotkey on the table that is locked in grid or a table that isn't locked in grid? Is the other table that gets swapped supposed to be locked as well? RE: Tables randomly change grid positions - Guest - 05-25-2014 (05-25-2014, 08:04 AM)SaT_Admin Wrote: I don't know. I just did a quick test and didn't see the problem. I have 4 Total Slots. 1 is the Stack Slot and the Stack for new tables as well. 2-4 are the additional grid spots. Move to Grid: After entering Pot. I am using External Vpip hotkeys. Quote:Are you using the hotkey on the table that is locked in grid or a table that isn't locked in grid? Is the other table that gets swapped supposed to be locked as well? It happens either way. It doesnt matter if they are locked or not. Even if they are not locked, this shouldn't happen ( worked fine before). An example of what happens: Assuming all grid spots are occupied, as soon as I make a vpip action on one of the tables in the grid, they swap positions ( I make a vpip action on grid slot 2---> it changes position with slot 3 or 4). This is very confusing, especially when there is a lot of action going on. I am using Hm2 and Table Ninja 2 as well. But I didnt change any settings there either. Here are my settings: Quote:[settings] RE: Tables randomly change grid positions - SaT_Admin - 05-26-2014 External VPIP hotkeys are not supposed to swap grid table positions. All they do is move a table from stack->grid. Moving between grid<->grid should never happen with those hotkeys. I tested with your settings layout and it worked correctly for me, I didn't have any swapping with the External VPIP keys. But I notice you have two PokerStars sites included into SaT. You should only have one. That may cause problems. I don't know if its related or not. Try first removing one of those and see if it fixes it. Next, I wonder if maybe TN2 or some other AHK script or something is interfering. In SaT's Advanced Options, try turning off "Drag and Drop to swap slots" and see if that solves it. RE: Tables randomly change grid positions - Guest - 05-27-2014 Quote:Next, I wonder if maybe TN2 or some other AHK script or something is interfering. In SaT's Advanced Options, try turning off "Drag and Drop to swap slots" and see if that solves it. This fixed the tables swapping positions, but they still disappear for about 0.5 sec after a vpip action. RE: Tables randomly change grid positions - SaT_Admin - 05-27-2014 (05-27-2014, 12:41 AM)Guest Wrote:Quote:Next, I wonder if maybe TN2 or some other AHK script or something is interfering. In SaT's Advanced Options, try turning off "Drag and Drop to swap slots" and see if that solves it. "After a vpip action"... you mean after you press one of your "External VPIP hotkeys" in SaT? I would check and see if any other software is interfering. Try turning off each software one at a time and see if the problem goes away. TN2, HEM, any AHK scripts. Wherever those External VPIP hotkeys are passing through to the other program, maybe the other software is trying to move the tables somehow somewhere.. |