Dual Screens setup - tables not where they're supposed to be as per templates - Printable Version +- StackAndTile Forums (https://www.stackandtile.com/forum) +-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1) +--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2) +--- Thread: Dual Screens setup - tables not where they're supposed to be as per templates (/showthread.php?tid=944) |
Dual Screens setup - tables not where they're supposed to be as per templates - rick - 01-06-2015 I set up the stack and tile layout to have but when I click start it just positions the tables seemingly randomly. I have two screens don't know if I have to change something for that RE: Dual Screens setup - tables not where they're supposed to be as per templates - SaT_Admin - 01-07-2015 If you click on Visualize Grid you can see the order of the slot #s. When you click Start, the tables will initially follow the "New Tables" setting. RE: Dual Screens setup - tables not where they're supposed to be as per templates - rick - 01-07-2015 Ok I mean some of the table templates are off screen inaccessible also when I set the visualize grid the actual real poker tables don't go where they're supposed to go. RE: Dual Screens setup - tables not where they're supposed to be as per templates - SaT_Admin - 01-07-2015 'Visualize Grid' simply displays the templates for where the slot locations will be. It is a step in the setup. It doesn't move any poker tables. If you cannot see some of the slots, use the "-" button to remove slots from your layout until you can see all of them when you press Visualize Grid. Then use the "+" button to add them back in |