+- StackAndTile Forums (https://www.stackandtile.com/forum)
+-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1)
+--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2)
+--- Thread: Help with two differnt pacific skins (/showthread.php?tid=975)
Help with two differnt pacific skins - mateo94 - 02-17-2015
Hello all i am currently from NJ and play on WSOP.com and 888 poker. I am able to get both to work individually but if i have both running SaT only stacks the tables for one of the clients. I have tried adding another pacific to the site list but it says pacific is already added and prevents that. I have also tried adding "Other" for the WSOP skin and after going through the entire wizard(Multiple times) it finishes gives me the "Yay" message and closes. From here it gets wierd. After closing the wizard nothing is added in terms of the customized skin and i am back to square one. Please help.
RE: Help with two differnt pacific skins - SaT_Admin - 02-18-2015
Hrm. This *may* be possible, but I'm not sure. Use the Help -> Diagonostic -> Get Window Title menu option, and grab the information for the WSOP lobby, and then come back and paste it.
Also, post the full config file that was created for the WSOP site when you chose Other and went through the custom site wizard. The file will be located in C:\Program Files (x86)\StackAndTile\Sites\ folder
RE: Help with two differnt pacific skins - mateo94 - 02-18-2015
(02-18-2015, 09:19 AM)SaT_Admin Wrote: Hrm. This *may* be possible, but I'm not sure. Use the Help -> Diagonostic -> Get Window Title menu option, and grab the information for the WSOP lobby, and then come back and paste it.
Also, post the full config file that was created for the WSOP site when you chose Other and went through the custom site wizard. The file will be located in C:\Program Files (x86)\StackAndTile\Sites\ folder
title=[Maple Shade Township NLH 50ยข/$1],class=[#32770]
[settings]
table_width=950
table_height=679
total_slots=4
slot1x=0
slot1y=0
slot2x=950
slot2y=0
slot3x=1900
slot3y=0
slot4x=2850
slot4y=0
stack_slot=1
newtables_slot=grid
move_to_grid=preflop
oldtables_duration=5
oldtables_slot=grid
scan_mode=DWM
[general]
show_walkthru=0
gui_x=-641
gui_y=141
last_tab=
filename=wsop2.ini
is_reloading=0
version=2.75
v=fu
RE: Help with two differnt pacific skins - SaT_Admin - 02-18-2015
Sorry.
1. You've used the Help -> Diagonostic -> Get Window Title option on a table. This is not what I need. I need it for the LOBBY window for the WSOP skin
2. You've pasted me the contents of the layout file. Either you got this from File -> Curent Layout or you got this from the file inside theC:\Program Files (x86)\StackAndTile\Layouts\ folder. This is wrong. I need the contents from the custom site config file that was created when you chose "Other" from the dropdown. This file is located in the C:\Program Files (x86)\StackAndTile\Sites\ folder
RE: Help with two differnt pacific skins - mateo94 - 02-19-2015
title=[Lobby],class=[#32770]
So i went to that file nothing was located there so i reran the program that was listed there to rerun the custom set up wizard and saved the file manually to my desktop this is the results
[settings]
standard_table_width=950
standard_table_height=679
buttons=fold,call,bet
action_button=fold
fold_button_x_coord=476
fold_button_y_coord=566
fold_button_region_topleft_x_coord=396
fold_button_region_topleft_y_coord=539
fold_button_region_bottomright_x_coord=558
fold_button_region_bottomright_y_coord=579
call_button_x_coord=646
call_button_y_coord=557
call_button_region_topleft_x_coord=581
call_button_region_topleft_y_coord=542
call_button_region_bottomright_x_coord=745
call_button_region_bottomright_y_coord=581
bet_button_x_coord=826
bet_button_y_coord=554
bet_button_region_topleft_x_coord=772
bet_button_region_topleft_y_coord=539
bet_button_region_bottomright_x_coord=920
bet_button_region_bottomright_y_coord=579
use_basic_click=1
table_class=#32770
table_include_title_text=
table_exclude_title_text=
RE: Help with two differnt pacific skins - SaT_Admin - 02-19-2015
Ok thanks. Are you trying to play on any other sites with SaT? Or is it only 888 and WSOP?
RE: Help with two differnt pacific skins - mateo94 - 02-19-2015
Only 888 and WSOP atm i was playing on borgata poker which was a party skin but i left the site because of crashes during mid hands.
RE: Help with two differnt pacific skins - SaT_Admin - 02-20-2015
Alright. Try this.
First, remove both the "888PacificPoker" site and also any 888 custom sites.
Then, download this file:
http://www.stackandtile.com/sat/tmp/888andWSOP.ini
Save that file into this folder:
C:\Program Files (x86)\StackAndTile\Sites\
Close and re-open SaT.
Scroll down to the bottom of the sites drop down list, and find "888andWSOP". Include that site.