WPN blitz poker
#1
I play 4 tables of blitz and put them in a 2v2 tile. By default, the true poker client will have each edge of the table touch one another after selecting "tile table". After I set up stack and tile, the table size shrink slightly so there are small gaps between the tables. When I turn stack and tile on and off, all four tables will shrink slightly. How do I make the tables the same size as the wpn default with no gaps? Did I mess up during the setup where you have to press the f keys? Is there a manual way to input the table size to match the exact proportions? 

Also, 1 out of 50 times or so, the hotkey for fold will click "fold and stay in hand" in blitz, which is the button left of the fold button. I think this might be due to the first problem I have with the table size, or maybe I am moving my mouse too quick after using the fold hotkey so its targeting another button.
Reply
#2
I would simply suggest you use Visualize Grid, and place the slots up next to each other. You WILL notice some gap during Visualize Grid, but that's normal for Win10. Just allow SAT to snap them when you drag and drop the slots close to each other.

More technical explanation below

If you are on Windows 10, then on most sites, it is normal to see gaps between tables when the tables are tiled. You can see here for explanation:
https://www.stackandtile.com/forum/showt...63#pid7263

However, you shouldn't be seeing gaps on WPN. That's because WPN draws their own custom table (you can tell by their non-standard titlebar), and so the "invisible resizing borders" which are mentioned in the above post are actually within the table boundaries on WPN, and so there is no risk of overlap.
Reply
#3
Ok gotcha, I'm comfortable with the tables now that I played some more.

However, the button issue still happens one in a while. It seems like it happens when there is folds on all 4 of my tables and I hover each table and use the fold hotkey very fast. One table will misclick "fold and stay in hand", which sits you out on blitz. I have to click "rejoin hand" on that table, which is a small annoyance. I tried using activate hotkey upon release, but it still happens sometimes. Is this issue purely because of dragging the cursor across multiple tables very fast, or is there something else I can do to remedy it?
Reply
#4
(12-16-2019, 08:39 AM)JamesYang Wrote: However, the button issue still happens one in a while. It seems like it happens when there is folds on all 4 of my tables and I hover each table and use the fold hotkey very fast. One table will misclick "fold and stay in hand", which sits you out on blitz. I have to click "rejoin hand" on that table, which is a small annoyance. I tried using activate hotkey upon release, but it still happens sometimes. Is this issue purely because of dragging the cursor across multiple tables very fast, or is there something else I can do to remedy it?

It sucks when a problem like this happens only randomly. It makes it very hard to find and debug, because we cannot reliably reproduce it.

It could be due to fast mouse movement. But I think it could also be that in these specific instances, SaT might be thinking that it is not your turn to act (even though it really is), and then it tries to click the Fold advance action checkbox instead.

Can you click File->Current Layout, and paste me everything?
Reply
#5
[settings]
table_width=640
table_height=516
total_slots=4
slot1x=315
slot1y=0
slot2x=955
slot2y=0
slot3x=315
slot3y=524
slot4x=955
slot4y=524
stack_slot=0
newtables_slot=grid
move_to_grid=never
oldtables_duration=5
oldtables_slot=0
scan_mode=DWM
play_mode=tile
activate_most_urgent=0
activate_table_under_mouse=0
highlight_active_win=0
move_mouse_to_most_urgent=0
move_mouse_if_not_over_table=0
left_click_detection=0
stack_when_clicking_call_or_bet=0
stack_table_at_end_of_hand=0
drag_drop_swap_slots=0
minimize_to_tray=0
show_table_count_while_running=0
show_actionreq_count=0
show_session_timer=0
show_random_number=0
move_888_popups=0
close_bovada_popups=0
stars_include_logged_in_as=0
notify_new_tables=0
notify_old_tables=0
notify_keep_in_grid=0
notify_ignore_table=0
notify_move_to_grid=0
notify_end_of_hand=0
notification_duration=3
hotkeys_fire_on_release=0
allow_action_hotkeys_on_ignored_tables=0
click_bet_for_allin_hotkey=0
click_bet_for_betsize_hotkeys=0
click_bet_for_betxbb_hotkeys=0
click_bet_for_betpot_hotkeys=0
also_keep_in_grid_when_move_to_slot_x=0
fold_checkbox_setting=Fold
also_stack_table_for_betsizeX=0
also_stack_table_for_allin=0
focus_betbox=0
detect_hidden_windows=0
auto_accept_stars_waitlists=0
click_stars_info_tab=0
[general]
show_walkthru=0
gui_x=1482
gui_y=192
last_tab=
filename=WPNBlitz.ini
is_reloading=0
version=2.99.00
win_ver=10.0.18362
dpi=96
v29900_msg=0
v=sm
[sites]
number_of_sites=1
included_sites=WinningPoker_T
WinningPoker_T_included_executable_path=C:\True Poker\True Poker.exe
WinningPoker_T_included_resized_table_width=640
WinningPoker_T_included_resized_table_height=516
WinningPoker_T_included_fold_color=0x1212d2
WinningPoker_T_included_call_color=0x1212d2
WinningPoker_T_included_bet_color=0xf0fbb
[hotkeys]
number_of_hotkeys=1
hotkey1action=Fold
hotkey1key=Escape
send_table_under_mouse=1
Reply
#6
Just to be sure, you do have the "Enable hotkeys" setting turned off within WPN, right?
https://www.stackandtile.com/sat/help/winning-poker

Ok so try this version 2.99.00p

https://www.stackandtile.com/sat/tmp/Sta...29900p.exe

IF the problem is with SaT randomly getting the Action Required wrong, and therefore trying to click the fold checkbox, then this should solve it. I've moved the fold checkbox coordinate over to the right.

Please test this version and let me know if it fixes it or not.
Reply
#7
Yes I have enable hotkeys turned off.

I will try that version and get back to you.
Reply
#8
Just played an hour of blitz with 4 tables and everything is working. Thank you for the fix. Love your product and will recommend it to others.
Reply
#9
(12-16-2019, 11:29 PM)JamesYang Wrote: Just played an hour of blitz with 4 tables and everything is working. Thank you for the fix. Love your product and will recommend it to others.

Ok great thanks for the feedback. And normally in that hour, you would have noticed a few Fold+Show clicks?
Reply
#10
(12-17-2019, 02:25 AM)SaT_Admin Wrote:
(12-16-2019, 11:29 PM)JamesYang Wrote: Just played an hour of blitz with 4 tables and everything is working. Thank you for the fix. Love your product and will recommend it to others.

Ok great thanks for the feedback. And normally in that hour, you would have noticed a few Fold+Show clicks?

Yea, only a few though, maybe 5 at most.
Reply


[-]
Quick Reply
Message
Type your reply to this message here.

Username::
Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)
Please select the number: 2
1 2 3 4 5 6 7 8 9 10