Ignition can't find call button

[SaT_Admin]

I have this working now. I had to use the custom site creator and even then, it complained that the buttons were black (they're not) and there was a problem. Just clicked OK a couple of times and it let me add the Ignition site as a custom site.

There are some issues with this. Using a custom site means that you will only get barebones support, and some of the features won't work. Next, if SAT is thinking the buttons are black, then SAT won't be able to determine when action is required, and the tables will likely be failing this Test:
https://www.stackandtile.com/sat/help/ta...ncorrectly

My guess is that Test will fail for you. Is it? You shouldn't ignore the "button detected as black" message. The likely problem is your scan mode. In the built-in BodogIgnition site, SAT internally uses "PW" scan mode, since that's the only mode that has worked in my testing. You could try changing to that scan mode in advanced options, and try Removing and re-Including the site again, and let me know if you still get the "button detected as black" message, and also check the Test in that link above again.

I don't think this is an issue with your software. Probably something twitchy with the graphics setup on my PC. I have an Intel HD graphics 4600 with all the 3D/Quality stuff turned on. Could be that.

Works fine now though, just had to set it up manually. The predefined Ignition site worked properly on my Lenovo laptop so it's definitely something with my PC.

Well, it may be something specific to your PC, however, a handful of people are having the same problems where SaT cannot find the 'call' button with the built-in BodogIgnition site, and so, I'd like to figure out what those specific PC problems are, so that I can fix the software to support those PCs