in PW, cannot get tables to "move to grid" when action required
#1
When I am using non-aero themes (as i need to do for more tables and less lag), stack and tile reverts to pw mode.
I remove and re-enter wpn, and things seem to go fine, but the tables move into the grid "preflop", clicking my "stack table" button stacks the tables, but they come right back into the grid without needed action!  Even though I have the setting in "layouts" set to "stackandtile, move to grid when action is required."

IN the notepad I see:
Move to grid=preflop

on my other cpu, I have one  that says "when action required", on THAT notepad i see

Move to grid=never
...

So I tried putting that setting on the problem cpu, but then the tables wont move to grid Sad

What is the setting I need for "move to grid when action is required?
Reply
#2
[settings]
increase_bet_increment=bb
decrease_bet_increment=bb
click_button_for_increase_decrease_bet=0
table_width=633
table_height=480
total_slots=6
slot1x=1266
slot1y=0
slot2x=1266
slot2y=478
slot3x=633
slot3y=0
slot4x=633
slot4y=479
slot5x=0
slot5y=0
slot6x=0
slot6y=479
stack_slot=5
newtables_slot=grid
move_to_grid=preflop
oldtables_duration=2
oldtables_slot=6
scan_mode=PW
activate_most_urgent=0
activate_table_under_mouse=1
highlight_active_win=1
move_mouse_to_most_urgent=0
left_click_detection=1
stack_when_clicking_call_or_bet=0
stack_table_at_end_of_hand=1
drag_drop_swap_slots=1
minimize_to_tray=0
show_table_count_while_running=1
show_session_timer=0
move_888_popups=0
close_bovada_popups=1
stars_include_logged_in_as=0
notify_new_tables=1
notify_old_tables=1
notify_keep_in_grid=1
notify_ignore_table=1
notify_move_to_grid=0
notify_end_of_hand=0
notification_duration=2
hotkeys_fire_on_release=1
allow_action_hotkeys_on_ignored_tables=0
click_bet_for_betsize_hotkeys=0
also_keep_in_grid_when_move_to_slot_x=0
fold_checkbox_setting=Fold + Check/Fold
also_stack_table_for_betsizeX=0
focus_betbox=0
detect_hidden_windows=0
play_mode=SaT
table_count_gui_x=1811
table_count_gui_y=950
click_ftp_timebank=0
auto_accept_stars_waitlists=0
[general]
show_walkthru=0
gui_x=1176
gui_y=541
last_tab=
filename=BOX2.ini
is_reloading=1
version=2.82a
win_ver=6.1.7601
v=fu
v282_msg=0
[sites]
number_of_sites=1
included_sites=WinningPoker
WinningPoker_included_executable_path=C:\BlackChipPoker\BlackChipPoker.exe
WinningPoker_included_resized_table_width=658
WinningPoker_included_resized_table_height=495
WinningPoker_included_hole_x_coord=324
WinningPoker_included_hole_y_coord=349
WinningPoker_included_fold_color=0x713902
WinningPoker_included_call_color=0xac5e0f
WinningPoker_included_bet_color=0xad5e0f
WinningPoker_included_table_color_behind_holecard=0x6064c
WinningPoker_included_flop_x_coord=241
WinningPoker_included_flop_y_coord=202
WinningPoker_included_table_color_behind_flop=0x141355

[hotkeys]
Reply
#3
side note: When all of my chips are in the middle, on a hand, the table will move back into the stack and stay there when I press the stack HK. if someone else is alllin and I have them covered and I call it, it stubbornly moves back into the grid after stacking, just like any other time I have cards...
Reply
#4
Ok, first of all move_to_grid=preflop is the correct setting which corresponds to "When action required". The name "preflop" is a result from the old setting which was named "Preflop" but in the interface it has since been changed to "When action required". But the word "preflop" is still used internally (although this will probably be corrected in a future version).

And move_to_grid=never corresponds to "Never", so you don't want that.

Now, as for the real problem:

A couple things for you to try, in order:

1. Remove and re-Include "WinningPoker" site, and retry.

2. Create a new layout with the menu item: "File -> New Layout". When it asks you to press F7 to define your slot size, first resize a WPN table with your mouse, to the size that you want your tables to be. Then press F7. This will match SaT's slot size with the WPN native proportions, which could be the problem. Looking at your config, the WinningPoker_included_resized_table_width/height settings are pretty far off of the table_width/height settings.

Let me know the results of both of those.

Finally, if neither of those work, this may have nothing to do with PW scan mode. Can you try turning on Aero theme temporarily, and using DWM scan mode, and then removing and re-Including WinningPoker and see if it works? That will be a clue also.
Reply


[-]
Quick Reply
Message
Type your reply to this message here.

Username::
Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)
Please select the number: 9
1 2 3 4 5 6 7 8 9 10