01-27-2016, 03:39 AM
(01-25-2016, 12:35 PM)assel007 Wrote:(01-25-2016, 10:58 AM)nervous_laugh Wrote: hey man,
(my ENG is bad, sorry) ive been having problems with 888 too. it detects the tables but doesnt let them go to stack, it forces them on the gird. im on windows 7 and SaT is setup like this:
http://imgur.com/rtCl1q5
http://imgur.com/QVjnD7m
http://imgur.com/czs15eS
other sites work fine. also thank you for the Winamax fold=check fix, helps a lot
I have the same problem with 888 tables don't go back to stack with sat version 2.84 (see my issues with sat 2.85 in the other thread).
The issues start after the new 888 (QT-)software update of this night.
I got the failure because I didn't use the recommended win 8.1 settings which I use now.
I already noticed the recommended setting, but never used it, because it was a pitty whith my high resolution display with 2880x1800 laptop display and two additional monitors with 1920x1080 resolution because on the monitors were everything so small. Finally I decided to lower my laptop resolution to 1900x1200 and installed the newest version of stackandtile and tested everything again, seems to work...