BetOnline table focus

[riverron]

hello...i just subscribed to SAT yesterday and have been fooling around with it most of the day....I LOVE this program....the only problem im having so far is i cant seem to keep the most urgent table focused until after i make action.....several different times, SAT would bring another table in front of the table i was trying to make action and then wouldnt highlight the next most urgent table....im trying to fix it to where if i have 10 or so tables waiting for action, SAT will highlight the most urgent table and stay focused on it until after i make action and then go to the next most urgent table and so on....here is a screenshot of the advanced settings i have checked

https://www.dropbox.com/s/r77cc00yq3902t...t.png?dl=0

[SaT_Admin]

Yeah those settings look fine. What you are describing is exactly how the software is supposed to work. I would suggest that you read this page and follow the steps to run the Test for each site that you play on:

http://www.stackandtile.com/sat/help/tab...ncorrectly

One thing I notice is that you're running Win10. If you are using multiple monitors, you may want to try the Win10 fix that is mentioned on that page as well.

Let me know the results

[riverron]

im only using 1monitor so hopefully the win10 fix isnt an issue.....i currently only play on ignition and BOL...i ran 4tables with ignition only, and it worked fine....i then tried to run 4 tables on BOL only, and this where my issue is...i ran that test thingy and the tables correctly said action required when they was supposed to ...whats annoying is that while i am trying to decide what action to take on one table, another table leaves the stack and goes to a slot and steals focus and pops in front of the previous table that i have not yet made action on....does anyone else have problems with BOL?....maybe its a poker site software issue....i will try fooling with it some more tomorrow...hopefully you have another idea what might be wrong

[SaT_Admin]

im only using 1monitor so hopefully the win10 fix isnt an issue.....i currently only play on ignition and BOL...i ran 4tables with ignition only, and it worked fine....i then tried to run 4 tables on BOL only, and this where my issue is...

Ok so the problem is with BOL then. Solution #2 on that link says to check the specific site page. The Chico help page has some settings that need to be changed within the poker client. I'm assuming you set those?

Also, after you finished initially Including the site into SaT, there were instructions to turn off the site's "Pop table to top when action required" setting within the site's poker client as well. If you don't do that, then each site will steal focus from each other. So you need to do that for all sites that you play on

i ran that test thingy and the tables correctly said action required when they was supposed to ...

If the Test thing says that the BOL table has action required or not when it supposed to, then everything should work, I would think...

whats annoying is that while i am trying to decide what action to take on one table, another table leaves the stack and goes to a slot and steals focus and pops in front of the previous table that i have not yet made action on....

So here is how it should work with the default Move To Grid = When Action Required:

1. a table in stack requires action, moves to grid slot #2 and takes focus
2. while it is still you turn to act on table in slot #2, that table continues to have focus
3. another table in the stack requires action, moves to grid slot #3
4. slot #2 still has focus until action is no longer required (when the fold/call/bet buttons are no longer visible)
5. then if slot #3 still requires action, focus will move to that table

Can you record a quick video showing the problem?

[riverron]

4. slot #2 still has focus until action is no longer required (when the fold/call/bet buttons are no longer visible)

this is probably my problem....the way i have my layout....i have them overlaping over 50%....so while im focusing on action in slot #2 and a table goes to slot #3, i believe it might be overlaping the fold/call/bet buttons....whats weird is that ignition seemed tp work fine that way....i will pull some tables up in 30 minutes or so and adjust the overlap and see if thats the problem.....txs

[riverron]

1 more thing....i would like to make a couple suggestions.....#1- it would be nice if we could adjust the size of the border of the red focus line around the focused table....and to be able to have it blinking would be nice also.....#2- when we are playing 6+ tables, it is very hard to remember the previous action....like if we bet the flop on one table and the have to make action on a couple more tables, then come back to the first, it would be nice to have a panel saying what action was took on the street before

[SaT_Admin]

4. slot #2 still has focus until action is no longer required (when the fold/call/bet buttons are no longer visible)

this is probably my problem....the way i have my layout....i have them overlaping over 50%....so while im focusing on action in slot #2 and a table goes to slot #3, i believe it might be overlaping the fold/call/bet buttons....whats weird is that ignition seemed tp work fine that way....i will pull some tables up in 30 minutes or so and adjust the overlap and see if thats the problem.....txs

Overlapping shouldn't be a problem, its supposed to still work with overlap. But yes do test that and let me know.

Are you sure you turned off the setting within each poker site like I said?

1 more thing....i would like to make a couple suggestions.....#1- it would be nice if we could adjust the size of the border of the red focus line around the focused table....

You can:
http://www.stackandtile.com/sat/help/ext...ed-options

and to be able to have it blinking would be nice also.....

You can't currently

#2- when we are playing 6+ tables, it is very hard to remember the previous action....like if we bet the flop on one table and the have to make action on a couple more tables, then come back to the first, it would be nice to have a panel saying what action was took on the street before

I feel like that is outside the scope of SaT. Further, I think most HUD's from the poker tracker applications can do this already?

[riverron]

https://s9.postimg.org/5vpfluplr/BOL_vid..._20_17.png

this is my settings.....the only difference here is yours says 800x600 res and mine is 1013x600...i tried changing to 800x600 but it keeps coming back

https://s17.postimg.org/pn4ax6o2n/BOL_ta..._20_17.png

these are the settings i have had all along

I am going to make a couple short videos....i will get them posted shortly

[riverron]

https://www.dropbox.com/s/ybaisos4rc474s...r.mp4?dl=0

here is a 5min video showing my problem

[SaT_Admin]

https://s9.postimg.org/5vpfluplr/BOL_vid..._20_17.png

this is my settings.....the only difference here is yours says 800x600 res and mine is 1013x600...i tried changing to 800x600 but it keeps coming back

https://s17.postimg.org/pn4ax6o2n/BOL_ta..._20_17.png

these are the settings i have had all along

I am going to make a couple short videos....i will get them posted shortly

Hrmmm 1013x600 might be a problem, but then again, if you are sure that the actionrequired test is passing, then everything should be good. But 1013x600 seems like a very weird proportion. If BOL has some type of casino bar on the table, you'll want to turn that off