(09-10-2017, 02:31 AM)AAAAALLIN Wrote: I had the resizing error. I decided to turn off layout options and only use hot keys which is working and an acceptable solution. Here is how I did it. I followed your instructions with a few tweaks. I have play mode in stack and tile. Grid total slot to 1. Stack slot , new table slot , old table slot, all to 0.
Ok great
(09-10-2017, 02:31 AM)AAAAALLIN Wrote: The only problem is my increase/decrease hotkey with the scroll up/down hot key does not work, however my all in hotkey by pressing middle mouse button (scroll wheel) does work. Any ideas?
I just checked the code. The allin hotkey doesn't check for the existence of the table requiring action. So that probably explains why that hotkey works. The increasebet hotkey does check to see if action is required. The reason is, if action is not required on the table, then we usually wouldn't want to be sending random clicks to the table, if the user presses the hotkey by mistake. I think even the allin hotkey should be checking for action required too. But if it did, then it would be failing under these circumstances
(09-10-2017, 02:53 AM)AAAAALLIN Wrote: Actually the scroll up and down hotkeys works for some tables and not for some, i think it has to do with what tables are already open when I push start on SnT
My guess would be that SaT is simply confused and cannot determine which tables require action or not. This is likely due to the different table sizes, which means the coordinates of the fold/call/bet locations will be different on each table, causing SaT to not be able to reliably detect them. That's why its so crucial to have consistent table sizes
