Can you please download this version v2.94y2 and try it:
http://www.stackandtile.com/sat/tmp/Stac...-294y2.exe
Some tweaks were made to try to fix this. Realize, that this is gonna be a problem until Bodog fixes their software. All I can do is try to work around it.
1. Remove 'BovadaBodog' from SaT if you have it, and then Include the new site 'BodogIgnition'
2. If you get the "Button detected as black" error message during Include Site setup when you press F10, then you should cancel and go into Advanced Options and change the Scan Mode to "PW" and then try again.
If you still get the 'black' error message, and are using Win10, please try solution #2 on this page:
http://www.stackandtile.com/sat/help/windows-10-fix
Ultimately we need the site to pass this Test:
http://www.stackandtile.com/sat/help/tab...ncorrectly
3. If FAILURE RESIZING error occurs, then the table will simply get "Ignored" from SaT. You can set up an "Ignore Table" hotkey to try to un-ignore the table when that occurs, and SaT will try again to resize the table. This has been a problem for many users, but in this latest version hopefully you will not get this error every time, and at least SOME TIMES it will work and successfully resize the table.
If you do still get that FAILURE RESIZING error every time, then you can help me out by doing this.. Please click on File->Current Layout, and add this line to the top of the file, underneath the [settings] line:
Save the file, and then close and re-open SaT. This will enable logging and some debug info. Also close and re-open Bodog. Then test again. This time, after you get the FAILURE RESIZING error, just press Stop. Then go to this folder:
C:\Program Files (x86)\StackAndTile\
Find the file "logg.txt" and email it to me at: support(at)stackandtile(dot)com
Then you can go back and delete that 'logging' line
http://www.stackandtile.com/sat/tmp/Stac...-294y2.exe
Some tweaks were made to try to fix this. Realize, that this is gonna be a problem until Bodog fixes their software. All I can do is try to work around it.
1. Remove 'BovadaBodog' from SaT if you have it, and then Include the new site 'BodogIgnition'
2. If you get the "Button detected as black" error message during Include Site setup when you press F10, then you should cancel and go into Advanced Options and change the Scan Mode to "PW" and then try again.
If you still get the 'black' error message, and are using Win10, please try solution #2 on this page:
http://www.stackandtile.com/sat/help/windows-10-fix
Ultimately we need the site to pass this Test:
http://www.stackandtile.com/sat/help/tab...ncorrectly
3. If FAILURE RESIZING error occurs, then the table will simply get "Ignored" from SaT. You can set up an "Ignore Table" hotkey to try to un-ignore the table when that occurs, and SaT will try again to resize the table. This has been a problem for many users, but in this latest version hopefully you will not get this error every time, and at least SOME TIMES it will work and successfully resize the table.
If you do still get that FAILURE RESIZING error every time, then you can help me out by doing this.. Please click on File->Current Layout, and add this line to the top of the file, underneath the [settings] line:
Code:
[settings]
logging=1
...Save the file, and then close and re-open SaT. This will enable logging and some debug info. Also close and re-open Bodog. Then test again. This time, after you get the FAILURE RESIZING error, just press Stop. Then go to this folder:
C:\Program Files (x86)\StackAndTile\
Find the file "logg.txt" and email it to me at: support(at)stackandtile(dot)com
Then you can go back and delete that 'logging' line
