07-30-2019, 03:02 AM
(This post was last modified: 07-30-2019, 03:11 AM by question1234.)
I use SAT for quit a while and I never want to miss it again.
Unfortunately I have lagging issues with a high number of tables of several clients which makes me lose a ton of money.
So please help me to setup the optimal config for my use case.
Here my System:
- XMG Gaming laptop
- NVidea GeForce GTX 1060 (6GB)
- portable monitor USB 3
- I needed to use a custom scale for SAT to work as described here: https://www.stackandtile.com/sat/help/windows-10-fix
- I also needed to use a different SAT version to solve my winamax problems (version=2.98.03d) see: https://www.stackandtile.com/forum/showt...p?tid=1968
- Pokertracker 4 HUD (problem also occures without it running)
I play MTTs only on:
- pokerstars.eu
- pokerstars.es
- winamax
- 888
- betsson / microgaming
My SAT use case:
- stack and tile
- 12 table grid (6 per screen)
- tables which require action jump into the grid
- I hover with my mouse over any table in the grid which needs action and use hotkeys to make an action.
- depending on my hotkey I use the table jumps back to the stack (i.e. "Fold+Stack") or stays in the grid (i.e. "Fold", if I want to observe the table after sending my action i.e.)
- in this scenario I might to use the hotkey to send all tables back to the stack "Stack all tables"
- I also have the option to use my mouse (left click), tables stay in the grid then
So in short:
- tables are stacked
- action required --> table/s jump into a free slot of the grid
- I need to hover my mouse anywhere above the table I want send an action to. So the Cursor doesnt jump automatically there. This way I can choose which table I want to send an action to with my mouse
- default: I fold/call/bet and table jumps back into the stack
- sometimes: I fold/call/bet and table stay in the grid so I can observe it. When I am done with observing I use the "stack all tables" hotkey
If thats not clear for you I can make a short video how I want to use it.
- sometimes during session SAT doesnt recognize a table and it gets ignored. I need to hover my mouse then over this table and use my "ignore table" hotkey so the table gets "unignored" and jumps back to the grid. I estimate it happens 6 times per hour with around 15-20 tables. Most often its a betsson table. But sometimes also winamax or stars.
When I reach more than about 18 tables + the lagging is very bad and I cant continue playing.
I tried to close PT4 + HUD but even then its very laggy so I guess the issue is SAT.
Here is my current config. Im sure I dont need all option available for this use case.
Please help me to solve the performance / lag issues for high num of tables.
TY
Unfortunately I have lagging issues with a high number of tables of several clients which makes me lose a ton of money.
So please help me to setup the optimal config for my use case.
Here my System:
- XMG Gaming laptop
- NVidea GeForce GTX 1060 (6GB)
- portable monitor USB 3
- I needed to use a custom scale for SAT to work as described here: https://www.stackandtile.com/sat/help/windows-10-fix
- I also needed to use a different SAT version to solve my winamax problems (version=2.98.03d) see: https://www.stackandtile.com/forum/showt...p?tid=1968
- Pokertracker 4 HUD (problem also occures without it running)
I play MTTs only on:
- pokerstars.eu
- pokerstars.es
- winamax
- 888
- betsson / microgaming
My SAT use case:
- stack and tile
- 12 table grid (6 per screen)
- tables which require action jump into the grid
- I hover with my mouse over any table in the grid which needs action and use hotkeys to make an action.
- depending on my hotkey I use the table jumps back to the stack (i.e. "Fold+Stack") or stays in the grid (i.e. "Fold", if I want to observe the table after sending my action i.e.)
- in this scenario I might to use the hotkey to send all tables back to the stack "Stack all tables"
- I also have the option to use my mouse (left click), tables stay in the grid then
So in short:
- tables are stacked
- action required --> table/s jump into a free slot of the grid
- I need to hover my mouse anywhere above the table I want send an action to. So the Cursor doesnt jump automatically there. This way I can choose which table I want to send an action to with my mouse
- default: I fold/call/bet and table jumps back into the stack
- sometimes: I fold/call/bet and table stay in the grid so I can observe it. When I am done with observing I use the "stack all tables" hotkey
If thats not clear for you I can make a short video how I want to use it.
- sometimes during session SAT doesnt recognize a table and it gets ignored. I need to hover my mouse then over this table and use my "ignore table" hotkey so the table gets "unignored" and jumps back to the grid. I estimate it happens 6 times per hour with around 15-20 tables. Most often its a betsson table. But sometimes also winamax or stars.
When I reach more than about 18 tables + the lagging is very bad and I cant continue playing.
I tried to close PT4 + HUD but even then its very laggy so I guess the issue is SAT.
Here is my current config. Im sure I dont need all option available for this use case.
Please help me to solve the performance / lag issues for high num of tables.
Code:
[settings]
table_width=686
table_height=541
total_slots=12
slot1x=0
slot1y=0
slot2x=623
slot2y=0
slot3x=1234
slot3y=0
slot4x=0
slot4y=509
slot5x=623
slot5y=509
slot6x=1234
slot6y=509
slot7x=1920
slot7y=0
slot8x=2534
slot8y=3
slot9x=3154
slot9y=3
slot10x=1920
slot10y=512
stack_slot=1
newtables_slot=grid
move_to_grid=preflop
oldtables_duration=1
oldtables_slot=grid
scan_mode=DWM
slot11x=2534
slot11y=512
slot12x=3154
slot12y=512
slot13x=1372
slot13y=0
slot14x=2058
slot14y=0
slot15x=2744
slot15y=0
slot16x=0
slot16y=541
slot17x=686
slot17y=541
slot18x=1372
slot18y=541
slot19x=2058
slot19y=541
slot20x=2744
slot20y=541
slot21x=0
slot21y=0
slot22x=686
slot22y=0
slot23x=1372
slot23y=0
slot24x=2058
slot24y=0
slot25x=2744
slot25y=0
slot26x=0
slot26y=541
slot27x=686
slot27y=541
slot28x=1372
slot28y=541
slot29x=2058
slot29y=541
slot30x=2744
slot30y=541
play_mode=SaT
activate_most_urgent=0
activate_table_under_mouse=0
highlight_active_win=0
highlight_border_inside=1
highlight_border_size=6
move_mouse_to_most_urgent=0
move_mouse_if_not_over_table=0
left_click_detection=1
stack_when_clicking_call_or_bet=0
stack_table_at_end_of_hand=0
drag_drop_swap_slots=1
drag_drop_mode=Logical
minimize_to_tray=0
show_table_count_while_running=1
show_session_timer=1
move_888_popups=1
close_bovada_popups=1
stars_include_logged_in_as=0
notify_new_tables=1
notify_old_tables=1
notify_keep_in_grid=1
notify_ignore_table=1
notify_move_to_grid=0
notify_end_of_hand=0
notification_duration=2
hotkeys_fire_on_release=0
allow_action_hotkeys_on_ignored_tables=1
click_bet_for_allin_hotkey=0
click_bet_for_betsize_hotkeys=0
click_bet_for_betxbb_hotkeys=0
also_keep_in_grid_when_move_to_slot_x=0
fold_checkbox_setting=Fold
also_stack_table_for_betsizeX=0
also_stack_table_for_allin=0
focus_betbox=1
detect_hidden_windows=0
auto_accept_stars_waitlists=0
auto_accept_wpn_waitlists=0
click_stars_info_tab=1
table_count_gui_x=1816
table_count_gui_y=918
[general]
show_walkthru=0
gui_x=-32000
gui_y=-32000
last_tab=
filename=config.ini
is_reloading=1
version=2.98.03d
win_ver=10.0.17134
v29803_msg=0
v=fu
dpi=96
v29805_msg=0
[sites]
number_of_sites=4
included_sites=Microgaming,888PokerNew,Winamax,PokerStarsHyperSimple
Microgaming_included_executable_path=C:\Microgaming\Poker\BetssonMPP\mppoker.exe
Microgaming_included_resized_table_width=685
Microgaming_included_resized_table_height=541
Microgaming_included_fold_color=0x3d96da
Microgaming_included_call_color=0x3d96da
Microgaming_included_bet_color=0x3e94d8
888PokerNew_included_executable_path=C:\Program Files (x86)\PacificPoker\bin\poker.exe
888PokerNew_included_resized_table_width=686
888PokerNew_included_resized_table_height=541
888PokerNew_included_fold_color=0x54442c
888PokerNew_included_call_color=0x364b29
888PokerNew_included_bet_color=0x193448
Winamax_included_executable_path=C:\Users\dpn\Winamax\Winamax Poker\Winamax Poker.exe
Winamax_included_resized_table_width=686
Winamax_included_resized_table_height=541
Winamax_included_fold_color=0xa066a
Winamax_included_call_color=0xa066a
Winamax_included_bet_color=0xa066a
PokerStarsHyperSimple_included_executable_path=C:\Program Files (x86)\PokerStars.EU\PokerStars.exe
PokerStarsHyperSimple_included_resized_table_width=686
PokerStarsHyperSimple_included_resized_table_height=501
PokerStarsHyperSimple_included_fold_color=0xcdc3b2
PokerStarsHyperSimple_included_call_color=0xcdc3b2
PokerStarsHyperSimple_included_bet_color=0xcdc3b2
[hotkeys]
number_of_hotkeys=27
hotkey1action=Disable Hotkeys
hotkey1key=Esc
hotkey2action=Activate most urgent and move mouse
hotkey2key=W
hotkey3action=Fold + Stack table
hotkey3key=A
hotkey4action=Call + Stack table
hotkey4key=S
hotkey5action=Bet + Stack table
hotkey5key=D
hotkey6action=Increase bet
hotkey6key=E
hotkey7action=Decrease bet
hotkey7key=Q
hotkey8action=BetSize 1
hotkey8key=1
hotkey9action=BetSize 2
hotkey9key=2
hotkey10action=BetSize 3
hotkey10key=3
hotkey11action=BetSize 4
hotkey11key=4
hotkey12action=All-in
hotkey12key=Space
hotkey13action=Cycle stack backward
hotkey13key=Left
hotkey14action=Cycle stack forward
hotkey14key=Right
hotkey15action=Keep all tables in grid
hotkey15key=G
hotkey16action=Start/Stop SaT
hotkey16key=^Esc
hotkey17action=Re-fill grid tables
hotkey17key=^R
hotkey18action=Move table to slot 2
hotkey18key=^2
hotkey19action=Fold
hotkey19key=Numpad4
hotkey20action=Call
hotkey20key=Numpad5
hotkey21action=Bet
hotkey21key=Numpad6
hotkey22action=Tile all tables
hotkey22key=T
hotkey23action=Stack all tables
hotkey23key=Z
hotkey24action=Toggle Activate Table when Action Req
hotkey24key=Y
hotkey25action=Toggle Move Mouse to Active Table
hotkey25key=X
hotkey26action=Ignore table
hotkey26key=I
hotkey27action=Keep all tables in grid
hotkey27key=K
send_table_under_mouse=1
TY