blackchippoker (wpn) problem after SaT update

[THE_M]

Hello,

after I installed the newest update of sAt, I ran into the following problem after I had to reinclude bcp: https://gyazo.com/ecbf635ad93f4567083efef15167dfb1 (never had that problem before and all the other sites are working fine)
Is there a way that I don't have to change my scan mode ? If so which scan-mode would you recommend. I'm using DWM atm.

thx for your help in advance.

[SaT_Admin]

You'll have to use PW scan mode, please try that and let me know.

You might not need to re-include all of your sites. Just make sure they pass the Action Required test:

https://www.stackandtile.com/sat/help/ta...ncorrectly

[Guest]

I tried it and everything still seems to work besides party. Also not after reincluding it. 
When I start sat party basically does not show any of the betting buttons or chat etc.
how it should be: https://gyazo.com/7742a98c263ace578fd7a33bb3333017
how it is: https://gyazo.com/bf0e08201606da22e8ebe8f8b5139e43

it stays like that till I stop sat and open the table again, when I start sat again it goes back to it.

[SaT_Admin]

Yeah this is a problem that will need to be fixed. In 2.99.02, i forced WinningPoker to use PW scan mode internally, and allowed other sites to use the chosen scan mode in the advanced options. But some people had problems with PW scan mode on WPN, so I removed that in 2.99.03

Party always has the problem you described with PW scan mode.

You can try this. Click File->Current Layout, scroll down to your partypoker settings, and add this line next to the rest:

Code:

PartyPokerModern_included_scanmode=DWM

Save the file, close SAT completely and re-open it, and then try it again. Also, run this Test to make sure that SAT is correctly detecting when action is required:

https://www.stackandtile.com/sat/help/ta...ncorrectly

Let me know how it goes

[Guest]

It worked out for me....but i have a warning saying DWM is faster then PW...it is??

[THE_M]

Yeah this is a problem that will need to be fixed. In 2.99.02, i forced WinningPoker to use PW scan mode internally, and allowed other sites to use the chosen scan mode in the advanced options. But some people had problems with PW scan mode on WPN, so I removed that in 2.99.03

Party always has the problem you described with PW scan mode.

You can try this. Click File->Current Layout, scroll down to your partypoker settings, and add this line next to the rest:

Code:

PartyPokerModern_included_scanmode=DWM

Save the file, close SAT completely and re-open it, and then try it again. Also, run this Test to make sure that SAT is correctly detecting when action is required:

https://www.stackandtile.com/sat/help/ta...ncorrectly

Let me know how it goes

Everything working now. tyvm

[SaT_Admin]

It worked out for me....but i have a warning saying DWM is faster then PW...it is??

DWM is faster in general. But there is nothing you can do about it. WPN doesn't work with DWM, it requires PW.