Hi,
I really like your software and ive been having issues with some sites. On GG Poker every new day when I start opening tables it does not work and i have to remove site and include it again. Usually it works throughout the session but on the next day it doesnt again and i have to do it all again.
On Winamax it has been working well but today it doesnt. I tried to remove and include again, it detects tthe table when using the F10 as asked but i cant get it to fold with F9. What else should i do?
Posts: 5,769
Threads: 30
Joined: Apr 2011
(02-26-2021, 04:08 AM)junyguitar Wrote: Hi,
I really like your software and ive been having issues with some sites. On GG Poker every new day when I start opening tables it does not work and i have to remove site and include it again. Usually it works throughout the session but on the next day it doesnt again and i have to do it all again.
When you say "doesnt work" on GG, what doesnt work? Are tables not detected and put into grid slots at all? Or are tables not popping up/out when its your turn to act?
(02-26-2021, 04:08 AM)junyguitar Wrote: On Winamax it has been working well but today it doesnt. I tried to remove and include again, it detects tthe table when using the F10 as asked but i cant get it to fold with F9. What else should i do?
I think you have the F-numbers mixed, but I understand. So F10 to fold isn't working?
By any chance, do you have multiple monitors that you keep plugging and unplugging
?
Also, i use hm3 and sharkscope huds. Don´t know if that can be related...
Posts: 5,769
Threads: 30
Joined: Apr 2011
(02-26-2021, 04:36 AM)junyguitar Wrote: Tables not detected on GG and put into grid slots at all. They are not recognized at all. But after i remove and include again ggnetwork it works well.
Thats strange. I dont think removing and re-including should make any difference here. Tables should always be detected. The re-include process just grabs the button colors when you press F10. But table detection should remain the same...
(02-26-2021, 04:36 AM)junyguitar Wrote: Ahah sorry about the Fs mixing up. Yeah F10 not folding. I have a laptop connected via hdmi cable to another monitor. (i am using this hdmi one as the primary one). Stack is on secondary monitor (laptop one) and grid with 6 slots on primary one
If your two screens (laptop + external) have different scaling %s in windows, then this could be a reason why the hand isn't folding. Try the solutions on this page and let me know if it fixes Winamax:
https://www.stackandtile.com/sat/help/wi...caling-fix
(02-26-2021, 04:48 AM)junyguitar Wrote: Also, i use hm3 and sharkscope huds. Don´t know if that can be related...
These shouldn't matter
Posts: 5,769
Threads: 30
Joined: Apr 2011
It looks like Winamax had an update thats why its failing, i'm working on a fix
Posts: 5,769
Threads: 30
Joined: Apr 2011
02-26-2021, 12:44 PM
(This post was last modified: 02-27-2021, 03:43 AM by SaT_Admin.)
Can you please try this version 2.99.13h
https://www.stackandtile.com/sat/tmp/Sta...29913h.exe
and let me know if it works
Posts: 5,769
Threads: 30
Joined: Apr 2011
(02-26-2021, 11:52 PM)gandraz Wrote: hello,
i have problem with winamax too. After update day ago i see resizing problems, i get weird border around table, buttons work fine.
https://imgur.com/S3vqXhG
Did you try the version 2.99.13h directly in the post above you? And Remove and re-Include the site? Tell me if that works any better