WPN (ACR)

[SaT_Admin]

one last thing which may be helpful in resolving this;

it happens that when i press betsize keybindings, sometimes the value in the betbox changes corresponding to the value I input, but somehow, the sizing on the bet buttons from ACR themselves won't change (so when i continue with the bet, the wrong sizing comes out still).

I did notice this once or twice. The betbox itself had the correct betsize inputted, however the Bet/Raise button was not updated to that value (it still had the old value). I think I can make this more reliable. I hope

I want to add that for the majority of the time, 100% pot tab gets pressed but the following bet calculation and paste back into the bet box is the part that fails.

When this part fails, is it the failure you describe above? Where the betbox does correctly get input, but the Bet/Raise button doesn't update?

Or does the new bet never get entered correctly into the box at all? And if so, what does get input there when it fails? Is it empty? Is it full 100% pot (as if no calc was performed and just the 4th betsize button was pressed)? Does a wrong % bet end up in there?

Also, for me the software becomes laggy after a while into the session. CPU load seems high as well.

I'm seeing this too, and I wonder if this is the culprit for the betting hotkeys as well...