Cannot prefold on Party.fr (PMU)

[DaradBur]

Hello,

I'm playing on PartyPoker French skin, and I cannot prefold on that site, I did add it using PartyPokerNew

[SaT_Admin]

Is SAT correctly detecting when its your turn to act? What is the result of this Test?

https://www.stackandtile.com/sat/help/ta...ncorrectly

If it always says "ACTION REQUIRED = YES", even when its not your turn, then maybe one thing to check is to make sure that you have turned on "3 color action buttons" inside the Party client:

https://www.stackandtile.com/sat/help/partypoker

If you had it turned off, then turn it on, and then Remove and re-Include the site

[DaradBur]

I don't have ACTION REQUIRED = YES, and I have the 3 colors enabled.

Let me know if I can help you debug/investigate this

[DaradBur]

I can precheck though

[SaT_Admin]

I don't have ACTION REQUIRED = YES, and I have the 3 colors enabled.

Let me know if I can help you debug/investigate this

Does it correctly say ACTION REQUIRED = YES, when it is your turn? And then change to NO, after you act?

[DaradBur]

It does indeed.

[SaT_Admin]

Hmmm, ok, I'm not sure whats going on then.

Can you supply me 3 things:

1. Click File->Current Layout, and paste me everything

2. Click Help->Diagnostic->Take Screenshot with GDIP, and take a screenshot of a party table when the pre-action fold checkbox is visible when the hotkey would normally fail

3. Use the same menu and take a screenshot when its your turn to act and the real fold/call/bet buttons are visible

You can send these via email to: support(at)stackandtile(dot)com