Several layout/hotkey issues
#1
Just bought SaT and now setting it up. I'm trying to do everything "by the book" but have already experienced some issues. So that I don't post several posts I'll write them down here. 

1) Layout issue - my layout setup looks like this (https://gyazo.com/82dfe2c83f223b067a179177e2c7ce6b), however when I started playing Pokerstars table didn't fill the slot (https://gyazo.com/2d957e85eebc06c8b42812e7709e08e0 ps on the left and winamax table on the right)

2) hotkeys - added right mouse button and wheel click hotkeys, but when I turned on SaT these clicks didn't work anywhere else (specifically for example in web browser closing tab by clicking wheel button didn't work, same with right mouse click on a text to open menu).
Reply
#2
The layout of PS tables is acctually way more off and 888 doesn't fit either. Created new layout from scratch, but still no luck.
Reply
#3
(03-21-2023, 04:53 AM)Tulx Wrote: Just bought SaT and now setting it up. I'm trying to do everything "by the book" but have already experienced some issues. So that I don't post several posts I'll write them down here. 

1) Layout issue - my layout setup looks like this (https://gyazo.com/82dfe2c83f223b067a179177e2c7ce6b), however when I started playing Pokerstars table didn't fill the slot (https://gyazo.com/2d957e85eebc06c8b42812e7709e08e0 ps on the left and winamax table on the right)

Variations in table sizing are due to each poker site's internal allowable proportions. You can test this out yourself by trying to resize a Stars, 888, and Winamax to be the exact same size without using SAT at all, but only your own mouse. You will find that you will be unable to match the sizes perfectly. This is the same issue that SAT must deal with.

SAT attempts to match the exact size, but in most cases, the sites end up only matching the correct width of the tables, and then the height is determined by the site. I believe this is what you're seeing. If you prefer instead for SAT to force the height, you can change that during Include Site setup. So you could Remove your site, and then re-Include it, and this time, before pressing F9, first click the ... button and choosing Size Preference = Height

For more info and workarounds see here:
https://www.stackandtile.com/sat/help/in...ble-sizes/

(03-21-2023, 04:53 AM)Tulx Wrote: 2) hotkeys - added right mouse button and wheel click hotkeys, but when I turned on SaT these clicks didn't work anywhere else (specifically for example in web browser closing tab by clicking wheel button didn't work, same with right mouse click on a text to open menu).
When adding the Right Click hotkey, SAT should have prompted you if you want to "pass through" the click to other windows. You would want to have answered Yes to this question. Answering Yes would have prefixed the keyname with a ~ character, which instructs SAT to pass the click or key through to the underlying Windows system as well. And so if you answered Yes, you would see the keyname in the list show up as ~RButton rather than RButton. Similarly, you can pass any key or click through with the same method, so for wheel buttons, you could remove and re-add the hotkey using ~WheelUp as the key

Alternatively, if you use the "beta highDPI" version on the downloads page, you can skip the entire above paragraph, because in that version, all hotkeys are restricted to poker tables only
Reply


[-]
Quick Reply
Message
Type your reply to this message here.

Username::
Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)
Please select the number: 10
1 2 3 4 5 6 7 8 9 10