Pokerstars: check and fold same key

[SaT_Admin]

when i click the fold button from stars and SaT shouldn't interact anyway, the checkbox "Always perform the selected action" is not selected.
But when i use the fold key with SaT this checkbox is selected. So it seems SaT clicks a bit to low?

SaT doesn't click at a location on the the popup, so I don't think it could be clicking too low. It specifically clicks the Button1 which is the Check button.

Are you using TableNinja or some other type of helper software? If so, can you try turning any and all of them off and just use SaT?

Can you also take a screenshot of the popup? Does it look the same as this that I posted earlier?
http://i.imgur.com/oa2Jf.png

[von7thal]

I deactivated all such software now. Still no difference.
Here the screenshot and my config file.



[settings]
hotkeys_fire_on_release=0
table_width=744
table_height=540
total_slots=7
slot1x=3
slot1y=3
slot2x=747
slot2y=2
slot3x=747
slot3y=542
slot4x=3
slot4y=543
stack_slot=7
newtables_slot=7
move_on_street=never
oldtables_duration=5
oldtables_slot=7
scan_mode=DWM
activate_most_urgent=0
highlight_active_win=0
left_click_detection=0
stack_table_at_end_of_hand=1
check_holecard_for_end_of_hand=1
minimize_to_tray=0
show_table_count_while_running=1
notify_new_tables=0
notify_old_tables=0
notify_keep_in_grid=0
notify_ignore_table=0
notify_action_required=0
notify_end_of_hand=0
notification_duration=3
slot5x=-744
slot5y=0
slot6x=-744
slot6y=539
move_to_grid=preflop
play_mode=SaT
move_mouse_to_most_urgent=0
drag_drop_swap_slots=1
slot7x=-1488
slot7y=540
table_count_gui_x=1790
table_count_gui_y=920
[general]
show_walkthru=0
gui_x=-1163
gui_y=113
last_tab=
is_reloading=1
version=2.2.0.0
v=fu
[sites]
number_of_sites=1
included_sites=PokerStarsBlack
PokerStarsBlack_included_executable_path=C:\Program Files (x86)\PokerStars\PokerStars.exe
PokerStarsBlack_included_resized_table_width=744
PokerStarsBlack_included_resized_table_height=540
PokerStarsBlack_included_hole_x_coord=458
PokerStarsBlack_included_hole_y_coord=358
PokerStarsBlack_included_fold_color=0x20250
PokerStarsBlack_included_call_color=0x20252
PokerStarsBlack_included_bet_color=0x2036c
PokerStarsBlack_included_table_color_behind_holecard=0x187412
PokerStarsBlack_included_flop_x_coord=290
PokerStarsBlack_included_flop_y_coord=206
PokerStarsBlack_included_table_color_behind_flop=0x1d8d16
[hotkeys]
number_of_hotkeys=4
hotkey1action=Fold + Stack table
hotkey1key=^!F
hotkey2action=Keep table in grid
hotkey2key=Down
hotkey3action=Move table to slot 5
hotkey3key=Left
hotkey4action=Move table to slot 6
hotkey4key=Right
send_table_under_mouse=1

[von7thal]

and here the popup when I have SaT closed:

[SaT_Admin]

Bug indeed, thanks!

That screenshot actually helped. Your buttons are black while mine are not. They turn black if you use the black lobby. I'm very surprised that no one has mentioned this before.

I will look into a fix for the next version. For now, if you use the Classic lobby theme, then it should work

[von7thal]

works great with the classic lobby
thanks!

[unt1]

hello  im russian  and  i hard to understand  all  this topic

can u support me ?

i use fold+title   on  Right MOUSE BUTTON  (RMB)

but when i  use  "RMB" for    CHECK  on post flop  -  table go to  stack     and I do not like it


i want when i CHECK - table stay on slot in grid


can i set up  SaT without  popup referred to above ?

and how to do it ?

using-stars  
theme-nova


thanks  and soooory for my  english

[unt1]

i need to after i press RMB for CHECK table dont move to stack
and go to stack only after i fold cards or hand is over

[SaT_Admin]

i use fold+title   on  Right MOUSE BUTTON  (RMB)

but when i  use  "RMB" for    CHECK  on post flop  -  table go to  stack     and I do not like it

i want when i CHECK - table stay on slot in grid

SaT should already do this.

The "Fold+Stack" hotkey tries to click Fold first, and then if you cannot fold, then it tries to click Check. If it clicks Check, then it doesn't move the table back to the stack, but instead keeps it in the grid.

I guess this could fail if SaT isn't properly detecting when its your turn to act. Do your tables pass this Test?

https://www.stackandtile.com/sat/help/ta...ncorrectly

can i set up  SaT without  popup referred to above ?

I don't think Stars uses that popup anymore anyway. When you can check for free, they remove the Fold button so you can't even click it.

[unt1]

"table moved to the grid
action required" writes me a SaT when I click hotkey fold+stack table for check\
but SaT does not press check the button just doesn't work and nothing happens
but when I click RMB for FOLD hotkey it works correctly


next i set up a new
maybe I could be wrong with solid white area
https://i.imgur.com/7QQ7CGR.png
I did not fully understand what this means
i just clicked on the white place on the flop card )
i use modified table graphics
but I don't think the problem is this https://i.imgur.com/9BQdesj.png


ok when I created a new layout and made only one hotkey for FOLD + STACK, everything seemed to work
but when i double click RMB table anyway going to stack, Is there any way to fix this?


I think I set everything up


It remains to understand why when SaT works then the RMB button does not work anywhere in extraneous programs as if SaT does not allow it to be used.
if i disable hotkeys then RMB starts working in other programs

[SaT_Admin]

next i set up a new
maybe I could be wrong with solid white area
https://i.imgur.com/7QQ7CGR.png
I did not fully understand what this means
i just clicked on the white place on the flop card )

If you click on the "?" in that screenshot, you should go to this page:
https://www.stackandtile.com/sat/help/fl...-hole-card

You need to click on a white part of the card that will ALWAYS be white. Your four color deck probably won't work.

You can try clicking on this location of the card shown by the arrow:
https://imgur.com/ZztPR1Z
But there is no guarantee that that will work.

i use modified table graphics
but I don't think the problem is this https://i.imgur.com/9BQdesj.png

Yes your modified table graphics is probably causing all of the problems. What PokerStars site are you choosing in SaT? How do you know its the correct one? What theme is your modified graphics based on? My guess is that your dark red button colors might be too close to the dark table background.

Answer all of those questions. Then click File->Current Layout, and paste me everything

ok when I created a new layout and made only one hotkey for FOLD + STACK, everything seemed to work
but when i double click RMB table anyway going to stack, Is there any way to fix this?

I don't understand

It remains to understand why when SaT works then the RMB button does not work anywhere in extraneous programs as if SaT does not allow it to be used.
if i disable hotkeys then RMB starts working in other programs

When you added the hotkey, SaT asked you if you want to pass the click through to other programs, you must have chosen "No". Remove the hotkey and re-add it.