Posts: 6
Threads: 3
Joined: Aug 2011
Sorry if the question is doing, but to me is impossible read in english. Sorry for my english, iam spanish man.
Only want that a table is on pot, (VPIP), call, check or bet, the table go a new slot and when the action finish, the table return the stack.
Is possible this with S&T?
Thank you for the help, and again, sorry for my english.
Posts: 5,778
Threads: 30
Joined: Apr 2011
'Move To Grid' setting = After Entering Pot
Posts: 6
Threads: 3
Joined: Aug 2011
The problem is when action finish, the table dont return the stack, need i click on "Fold Zone".
¿Any solution?
Than you
Posts: 5,778
Threads: 30
Joined: Apr 2011
12-31-2012, 06:54 AM
(This post was last modified: 12-31-2012, 06:54 AM by SaT_Admin.)
What do you mean by "when the action is finished"?
Do you mean when the hand is finished?
If so, then you want to turn on "Stack Table at End of Hand" and probably "Include Hole Card Detection"
http://www.stackandtile.com/sat/help/advanced-options
Turn those on, and then you will have to remove and re-Include your Sites
Posts: 6
Threads: 3
Joined: Aug 2011
Ok but when I config the new site, no option hole card detection.
Only press F9 for detect and F10 por fold card.
Other way?
Than you for the help
Posts: 5,778
Threads: 30
Joined: Apr 2011
You have to turn on the two settings above in Advanced Options first.
Posts: 6
Threads: 3
Joined: Aug 2011
Ok Ready.
Step1, in About, click on advanced Options
Step2, Send tables to stack at end of hand
Step3, Include holecard detection
Step4, cards at pokerstars white.
Than you for the help.
Now test with 35 tables.
Will write my experience.
Posts: 5,778
Threads: 30
Joined: Apr 2011
Yes that's correct.