First, thank you very much for your detailed and specific post. That really helps. Thank you for testing with turning other software off as well.
This is very strange. Are you running SaT as Administrator? The only reason that I can think of that would stop the mouse from moving, is if SaT is not detecting that action was required. However, you say that the red highlighter does correctly detect when the table needs action. So I don't really know whats going on. I'll have to test some with 888.
Have you tried leaving the red highlighter on, and using both "Activate table when action required" and "Send hotkeys to ACTIVE TABLE" ? Perhaps that is a better solution, then you can just look for the red highlighted table to act on. I'm curious how that would work, especially since you use gamepad. I think it might be best
Not at the moment. You are the first to ask. I am planning an update within the next few days and I will add this feature in.
What site did this happen on? Did it click the wrong buttons on all sites or just one specific site?
It is a common problem on iPoker, and since you said you play on Titan then I am going to guess that was the problem site.
See here:
http://www.stackandtile.com/sat/help/ipoker
Basically, SaT requires that iPoker have the full chatbox. You will see that when you minimize the chatbox, the fold/call/bet buttons move to the middle of the table. SaT will end up clicking the wrong button unless the chatbox is full size.
Haha. Actually SaT has a hidden built in hotkey: CTRL + ALT + SHIFT + Q
That hotkey will auto-quit SaT in case you think that SaT is going crazy.
Good ideas to try those other options, but I don't think they were the problem. The "Left mouse click detection" option is for SaT to look for when you click fold/call/bet with the mouse instead of just using hotkeys. So for example, instead of using "Fold+Stack" hotkey, if you just move your mouse to the Fold button and click it, SaT will detect that click location and send the table back to the stack since you clicked on Fold.
The "RButton" popup is to allow right mouse clicks in Windows and other applications. If you choose 'No', you'll notice that you cannot right click anywhere.
Your english is fine. I appreciate the long post. I will look into the 888 issue, because it doesn't make sense to me. I can understand if the red highlighter didn't work, then of course I would expect the mousemove to not work too. But its very very strange if one works and not the other.
(01-06-2013, 07:57 AM)Guest Wrote: Problem: when it is my turn to act on 888 table, mouse moves only 50% time to it. I mean mouse moves to active 888 table only about once in two times, not exactly but something about that. Maybe even 30% times. And red frame does correct job, it moves when it should.
This is very strange. Are you running SaT as Administrator? The only reason that I can think of that would stop the mouse from moving, is if SaT is not detecting that action was required. However, you say that the red highlighter does correctly detect when the table needs action. So I don't really know whats going on. I'll have to test some with 888.
Quote:When action on 888 i lose control, because i am looking where is table to act and secondly i look for my mouse and move it manually to active table. I switched red frame off, no reason to use it. Set it to send hotkeys to table UNDER MOUSE, because when mouse not allways move i make mistakes on tables i dont have my eyes on, because my eyes follow mouse. I use wireless gamepad, not mouse.
Have you tried leaving the red highlighter on, and using both "Activate table when action required" and "Send hotkeys to ACTIVE TABLE" ? Perhaps that is a better solution, then you can just look for the red highlighted table to act on. I'm curious how that would work, especially since you use gamepad. I think it might be best
Quote:Secondly i want to ask, is it possible to change border colour from red to say blue and make it bigger, i mean with fat lines? If yes, can you tell me where to write commands.
Not at the moment. You are the first to ask. I am planning an update within the next few days and I will add this feature in.
Quote:when some tables moved out from stack to grid for action i pressed FOLD with my RIGHT MOUSE BUTTON (it was set to Fold and send back to stack) and what happened is i watch on that table and it RAISED or CALLED, not shore instead of FOLD.. then next table poped out from stack to grid and SAME... it raised or called, i think and something started to freeze and it was impossible to press any button i thinnk and there was allready 6 tables to act in grid and i was hopeless and on all tables it was raising and betting..
What site did this happen on? Did it click the wrong buttons on all sites or just one specific site?
It is a common problem on iPoker, and since you said you play on Titan then I am going to guess that was the problem site.
See here:
http://www.stackandtile.com/sat/help/ipoker
Basically, SaT requires that iPoker have the full chatbox. You will see that when you minimize the chatbox, the fold/call/bet buttons move to the middle of the table. SaT will end up clicking the wrong button unless the chatbox is full size.
Quote:i was going crazy.. i was thinking this is it THE END OF THE WORLD.. LOL... Only action helped CTRL+ALT+DEL and to stop that madness...
Haha. Actually SaT has a hidden built in hotkey: CTRL + ALT + SHIFT + Q
That hotkey will auto-quit SaT in case you think that SaT is going crazy.
Quote:i lost on 5 or 6 tables... on few i was megachipleader... i was so tilted i didnt played that day at all. Next day i was thinking a lot... and found interesting for me solution. Not sure i am right but that what was helped i think... i firstly unchecked "take care of left mouse action" and secondly i remembered that there was one popup when setting up hottkeys, so i reentered hotkeys and when adding "FOLD AND SEND BACK TO STACK" to use with RIGHT MOUSE BUTTON, there is popup jumping up, it asks somethink like - do you want to pass thru it to underlying windows and use other functions under mouse, and this time i pressed NO. Dont know its helped, but crazy betting and raising on all tables gone
Good ideas to try those other options, but I don't think they were the problem. The "Left mouse click detection" option is for SaT to look for when you click fold/call/bet with the mouse instead of just using hotkeys. So for example, instead of using "Fold+Stack" hotkey, if you just move your mouse to the Fold button and click it, SaT will detect that click location and send the table back to the stack since you clicked on Fold.
The "RButton" popup is to allow right mouse clicks in Windows and other applications. If you choose 'No', you'll notice that you cannot right click anywhere.
Quote:So all i realy want before buying this good soft is to make sure my blinking mouse cursor is muving 100% to all active tibles, 100 times out of 100. Thank you and sorry for long hard text in not proper english.
Your english is fine. I appreciate the long post. I will look into the 888 issue, because it doesn't make sense to me. I can understand if the red highlighter didn't work, then of course I would expect the mousemove to not work too. But its very very strange if one works and not the other.
