Activate next Table

[Guest]

Hey!

Sometimes I have an issue when I want to take more time for a decision on a specific table.

F.e. I have table x on the grid where I need to take the time bank for a tough decision. The next table in line is on the stack slot and wont pop up until I have made an action on table x, making me play catch up after the action on table x.

I would like to have a hotkey to put the the next table in line on top of the stack slot to make it more efficient. While thinking about what to do on table x I could already work on the next table if its an easy decision. This would make StackAndTile even more efficient.

The "next in line" hotkey should only work if table x is on a grid slot and the table next in line is on the stack slot.

Now that I think about it the hotkey should just always put the the most urgent stack slot table on top . I know there is already an "activate most urgent table" hotkey, but this one would work differently.

I hope you can understand what I am looking for in this hotkey. Hopefully it wont be too hard to implement.

[SaT_Admin]

Hey!

Sometimes I have an issue when I want to take more time for a decision on a specific table.

F.e. I have table x on the grid where I need to take the time bank for a tough decision. The next table in line is on the stack slot and wont pop up until I have made an action on table x, making me play catch up after the action on table x.

I would like to have a hotkey to put the the next table in line on top of the stack slot to make it more efficient. While thinking about what to do on table x I could already work on the next table if its an easy decision. This would make StackAndTile even more efficient.

What you describe is a very common problem when multitabling with a stack. But what you describe: This is how SaT is supposed to work already, to solve this problem.

Normally, when it is your turn to act on a table, SaT will move tables out of the stack and into the grid. Now, if all of the grid slots are full, then the stack tables have no where to go when they require action. In this case, SaT will bring them to the top of the stack so that you can see them (at least it should).

So I would rather focus on helping you fix the issue as to why this isn't happening already. Can you click on File -> Current Layout and then paste everything in that file? That will show me your config. Also please describe your normal play with SaT.

[Guest]

Sorry for the late reply:

Here is my config:

[settings]
table_width=629
table_height=461
total_slots=4
slot1x=0
slot1y=4
slot2x=654
slot2y=0
slot3x=654
slot3y=475
slot4x=0
slot4y=475
stack_slot=1
newtables_slot=1
move_on_street=vpip
oldtables_duration=5
oldtables_slot=1
scan_mode=DWM
alternate_scan=
activate_on_move=0
left_click_detection=1
bring_urgent_tables_to_top=0
engine_delay=800
action_delay=275
hotkeys_fire_on_release=0
minimize_to_tray=0
move_to_grid=vpip
play_mode=SaT
activate_most_urgent=1
activate_table_under_mouse=0
highlight_active_win=0
move_mouse_to_most_urgent=0
stack_table_at_end_of_hand=0
drag_drop_swap_slots=0
show_table_count_while_running=0
show_session_timer=0
move_888_popups=1
notify_new_tables=1
notify_old_tables=1
notify_keep_in_grid=1
notify_ignore_table=1
notify_move_to_grid=0
notify_end_of_hand=0
notification_duration=3
allow_action_hotkeys_on_ignored_tables=0
click_bet_for_betsize_hotkeys=0
stack_when_clicking_call_or_bet=0
[general]
gui_x=1225
gui_y=517
last_tab=
is_reloading=0
version=2.65
show_walkthru=0
v=sm
[sites]
number_of_sites=1
included_sites=PokerStarsNova
PokerStarsNova_included_executable_path=E:\Program Files (x86)\PokerStars.EU\PokerStars.exe
PokerStarsNova_included_resized_table_width=628
PokerStarsNova_included_resized_table_height=461
PokerStarsNova_included_fold_color=0xb0b62
PokerStarsNova_included_call_color=0xa0b5a
PokerStarsNova_included_bet_color=0xa0a4f
[hotkeys]
number_of_hotkeys=21
hotkey1action=Stack table
hotkey1key=~RButton
hotkey2action=Keep table in grid
hotkey2key=Up
hotkey3action=Stack table
hotkey3key=Down
hotkey4action=External VPIP key
hotkey4key=~MButton
hotkey5action=External VPIP key
hotkey5key=~Numpad5
hotkey6action=External VPIP key
hotkey6key=~Numpad6
hotkey7action=External VPIP key
hotkey7key=~Numpad7
hotkey8action=External VPIP key
hotkey8key=~Numpad8
hotkey9action=External VPIP key
hotkey9key=~NumpadIns
hotkey10action=External VPIP key
hotkey10key=~Enter
hotkey11action=Move table to Next slot
hotkey11key=Right
hotkey12action=Move table to Previous slot
hotkey12key=Left
hotkey13action=External VPIP key
hotkey13key=~NumpadClear
hotkey14action=External VPIP key
hotkey14key=~NumpadRight
hotkey15action=External VPIP key
hotkey15key=~NumpadHome
hotkey16action=External VPIP key
hotkey16key=~NumpadUp
hotkey17action=External VPIP key
hotkey17key=~Numpad0
hotkey18action=External VPIP key
hotkey18key=~XButton2
hotkey19action=External VPIP key
hotkey19key=~XButton1
hotkey20action=Activate most urgent table
hotkey20key=Ctrl
hotkey21action=Ignore table
hotkey21key=NumpadAdd
send_table_under_mouse=1

You didn't touch on the issue I was talking about, though. You were just describing how SAT usually works.

Im trying to describe my issue again. I have table A and B. Table A is already on the grid and I have a tough decision to make which takes some time. Table B is still in the stack slot and is the next table in line needing action as well. But it wont pop up on top of the stack until I have made a decision on table A.

What I want is a hotkey that puts the most urgent table on the stack slot on top regardless if there is another table on the grid that needs action prior to the "most urgent table on the stack".

Hope this was more understandable.

[SaT_Admin]

I understood your post the first time. You have 4 slots, so assuming that all grid slots 2,3,4 were already full, and Table B was in the bottom of the stack and required action, SaT is supposed to bring that table to the top of the stack by default.

But, I found your problem in your config:

Code:

bring_urgent_tables_to_top=0

You must be a long time user. This was an old setting that used to be configurable in the Advanced Options. I have since removed it because I always want it on by default. Perhaps you had set this to 0 a long time ago. Change that setting to 1, and then save the config file, and reload SaT. Then test it out. It will work. Or you could even remove that line completely, and then SaT will revert to always having it on by default.

[Guest]

This is very good news

And yes, I am a very long time user of your program because it's awesome!!!

Are there any other lines that are not up to date anymore in my config ?

[SaT_Admin]

This is very good news

And yes, I am a very long time user of your program because it's awesome!!!

Are there any other lines that are not up to date anymore in my config ?

Thumbsup

You can remove these lines as well, but it won't matter because SaT no longer even reads them:

move_on_street=vpip
alternate_scan=
activate_on_move=0

I still do read the bring_urgent_tables_to_top just in case someone wants that turned off for whatever reason